Question about Polaroid 4641-TLXB 46 in. LCD Television

1 Answer

We get bad static and popping when we use the remote to control the volume. When we run the satellite through a DVD player, we don't. Dish Network has replaced the DVR and the remote. Any thoughts?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

There could be a few things causing this problem, but here are some things to try. If you get no popping while running the DISH through a DVD player, that usually will indicate a cabling issue. The issue being with the cable you use to run the receiver straight to the tv. I would try to replace that cable. Another thing you can try is to try another input on the back of the tv for the cable. Such as, if your cable is in the HDMI 1 or Video 1 location on the tv, then try HDMI 2 or VIDEO 2. Sometimes the individual ports on the tv for the cables start going bad, and this will happen.


Becki Barned
DISH Network Customer Service

Posted on Feb 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i sync my ir Dish Satellite remote so my Sony NSG-MR1 remote will work for Dish


Here are the directions to do so:

1. Hold down the clear TV button on the top of the remote until all lights light up
2. Put in a three digit code (provided below)
3. Press the # (POUND) button
4. Try the TV power and the volume. If both of these don't work, try another code.

500
000

Becki Barned
DISH Network
Customer Service

Oct 25, 2011 | Sony Nsgmr1 Remote Control

1 Answer

I have a Sony Bravia TV, only a year old, had several power outages and suddenly RM-YD028 TV remote is not working at all. On the Dish network remote, the satellite controls are working, but not TV...


If neither the DISH Network remote or the TV remote is working for you most likely your remote sensor is going bad. If you'd like to try readdressing the remote follow the steps and procedures below. Codes: 500, 837, 125, 808, 798, 640, 796, 783, 795, 797, 865, 846, 842, 563, 501, 810, 841, 781, 807, 838, 690, 758, 843, 845, 591, 839, 806, 840, 844
To program the remote:
1.) Hold the clear "TV" mode button for four seconds or until all four buttons at the top of the remote are lit.
2.) Press one of the three digit codes listed above followed by pound (#)
3.) Check for functionality by trying the volume power and mute.
Be sure to press the "SAT" button to return to satellite mode if the code works.

Daniel Busa
DISH Network
Customer Service

May 31, 2011 | Sony RMYD028 Remote Control

1 Answer

I have recently had dish network installed and now I cant get my DVD player to play I have tried contacting dish network for assistance and no one can figure out the problem. I have a LG TV


Hello! This is Dan with DISH Network customer support. have you tried cycling the inputs? If you have an HD tv the DISH receiver and your DVD are probably connected using different cables. I would power them both on and hit the input or source button on your LG remote until you get a picture from the dvd player. Remember what input comes up as you will need to change this to go from satellite to DVDand back.

Jan 12, 2011 | Directed 434MHZ Remote Control

1 Answer

When we run the satellite through a DVD player, the volume works fine. When we don't, we get bad static and popping. Dish Network has replaced the remote and the DVR, so it appears to be the TV.


I would assume the problem would be either in the cabling or the DVD player. Have you tried running thecable straight from th receiver to the tv?

Daniel Busa
DISH Network Customer Service

Jan 02, 2011 | Polaroid 4641-TLXB 46 in. LCD Television

1 Answer

Dish network remote to run RCA DVD player


I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online

Apr 25, 2010 | DISH Network IR Remote Control

1 Answer

Need code for 32in.olivia tv


Remote manufactures and service providers continuously add support for new TV products. If you have the following Satellite or Cable Systems, try these remote codes for Olevia HDTVs.

Also available is the Olevia Universal Learning Remote RC-LRN that offers component programming of most video hardware including your Cable or Satellite Receivers, VCR's, TiVo’s, DVD, Blu-Ray or even HD- DVD players. The learning remote is available at 866-965-3842
Dish Network Remote Codes 506 or 127

could try Dish Network..Remote Codes 506 or 127
Satellite TV Systems Dish Network Remote Codes 506 or 127
Dish Network Remote Codes 506 or 127

May 23, 2009 | Syntax Olevia 537H Television

1 Answer

Need Dish Network Code for Sony DAVHDX275 Audio System


Refer to page 82 in your Dish Network User's Guide......(Make sure Sony system is powered on and in DVD mode with a disc in the player).  Point Dish remote at Sony box -  Hold Aux until all buttons light up at top....press 2 - then STAR button* and then POWER button - then press the up arrow key repeatedly until Sony turns off - press # key to lock in code.
It took me awhile to get it to work....it will only work power, mute, and volume - not dvd play functions. Refer to page 85 to make the Dish remote control the Sony box volume by default.
Good luck.

Jan 25, 2009 | Sony BRAVIA DAV-HDX267W Theater System...

2 Answers

Remote problem Hisense


I GOT A NEW HD WIDESCREEM POLAROID. DIRECTTV CONTROL PUTS ON POWER ON TV,CHANGES CHANNELS BUT DOES NOT CONTROL VOLUME NOR CONTROL DVD ANDVCR PLEASE HELP GODWIN

Jan 08, 2008 | One For All URC-4021 Remote Control

3 Answers

TV remote codes


1000,1001,1002,1003,1004
MAGNAVOX and 0000,0001,0002,0003,0004
0057 PHILIPS and 0005,0006,0007,0008,0009

Dec 08, 2007 | Polaroid 1720-7 Remote Control

Not finding what you are looking for?
Polaroid 4641-TLXB 46 in. LCD Television Logo

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...