Question about D-Link DIR-615 Wireless Router

1 Answer

How to reconfigure my router - D-Link DIR-615 Wireless Router

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 600 Answers

Open INTERNET EXPLORER and. In the URL address field, enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the address. This is usually the default IP address for most routers.do not type "www" just the number
Enter the username and password for your router. This should also be supplied in the router's manual. If you don't have this information, go to routerpasswords.com and find the brand and model of your router. This site lists the default login information for most wireless routers you can try "ADMIN" for user name and "PASSWORD" for passsword.
You should now be able to see your wireless router settings. You can configure your network ports, as well as SSID (wireless network name) and passwords.

If this was helpful, please indicate so, if not -comment back so we can dig further to resolve this

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reconfigure a used router?


You sure can. You just need to resent the router to default settings including username/password, and reconfigure it all over.
Further instruction can be provided if you tell us the model of the router, and the type of Internet Service.

Jan 09, 2013 | Belkin Computers & Internet

2 Answers

I can connect directly to the router but lost my ability to connect wireless


reset ur router to its factory defaults ... upgrade the firmware to latest version and reconfigure ur router .

Jan 07, 2010 | NetGear WGR614 Router

1 Answer

Forgotten the wep key - can anyone help??


Just connect the lan cable into router and access the router configuration page and reconfigure the wep key in router .but if you forget the router access code the reset the router and reconfigure the router.

Dec 31, 2009 | NetGear DG834G Router

1 Answer

Belkin F5D8638au4A modem-router. router operation


Try first to reset and reconfigure the router , to reset it press and hold the reset button of the router for 10 seconds while power is ON and then after that reconfigure the router........

Dec 07, 2009 | Belkin N Wireless Modem-Router F5D8633au4A

2 Answers

Hi i have a lexmark all in one printer,recently i changed my router and now cant connect the printer wirelessly to the computer!


You will have to reconfigure the printer with the router and then reconfigure the PC. All routers don't have the IP address range. That might be the reason why it isnt working after changing the router. Also, if you were using the printer wirelessly, the SSID (network name) and the wireless security needs to be reconfigured to match your new router. The simplest way to achieve this would be to connect the printer hard wired to the router; uninstall the printer drivers completely from the PC; and run the setup disk again. The setup will walk you through the whole process.

Please get in touch if you need further clarifications.

regards

Sandeep

Oct 27, 2009 | Office Equipment & Supplies

1 Answer

My linksys wrt54gp2 router needs to be


To reconfigure the router you dont need to be online. Acces the router page 192.168.1.1 and then reconfigure the same

Feb 26, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Reconfiguring rouer


If you have the setup CD you can just run it to your computer and let it reconfigure the router for you, but if you don't have the setup CD you need to manually configure the router by accessing its IP address using the computer that is wired directly to the router....

Nov 05, 2008 | NetGear WGR614 Wireless Router

1 Answer

I need to reconfigure my router


You don't need to reconfigure your router, but after restore you will need to set your wireless network again. You will find the info to do that here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

Oct 14, 2008 | NetGear WGR614 Wireless Router

1 Answer

Reconfigure router


I seriously can't stand those motorola routers specially since they have to reboot themselves after every change.

Unplug the power from the router, hold the reset button in and plug the power back. Keep holding the reset button for 30 seconds. That should restore it back to factory settings. Plug one machine to the router and try to access the admin console. if memory serves me correctly, the user name is admin and password is motorola.


Jun 14, 2008 | Blitzz Technology BWA711 (B3WL000900)...

Not finding what you are looking for?
D-Link DIR-615 Wireless Router Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...