Question about JVC TH-S11 Theater System

3 Answers

Locked dvd tray.

The open/close button will not open the dvd tray and a "locked" message appears in the window. can open the tray, says *tray lock*

Posted by on

  • 5 more comments 
  • tracy405 Nov 03, 2008

    tray will not open - says locked jvc TH-S55

  • Anonymous Nov 10, 2008

    has anyone held, i´ve the same problem

  • tnorheim Dec 26, 2008

    panasonic SC-HT830V will not open the DVD . It says Locked. Does anyone know what I can do?

  • tmac76 Jan 07, 2009

    'Tray Lock' error message... Can't eject CD.

  • mukul_kin Jan 15, 2009

    tray is not opeaning says locked

  • razodo Jan 31, 2009

    Same problem, I have a Panasonic SC-DM3... it seems like a "Child Lock" so that the DVD tray won't open.

  • juanitam Apr 24, 2009

    says 'locked' when i try to do anything with the dvd functions.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

With the unit off press and hold the stop button and the eject button.

Posted on Apr 24, 2009

  • trangvn May 18, 2012

    Thank you, thank you, thank you very muche. i'am vietnamese

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem.  I found these instructions to unlock it.  It worked for me.  Good Luck!
Unplug the DVD player for 30 seconds. Turn the DVD player on WITH THE REMOTE. Press Enter on the remote. Press 8, 4, 2, 6, 9. Press Enter on the remote.
The Tray is suppose to open automatically after doing the above.  Mine didn't.  I pressed the open button on the remote and it opened.

Posted on Jan 07, 2009

  • Fk_digit Mar 27, 2012

    Thanks alot it works perfectly ,am so happy frank from nigeria

×

Depending on your sytem, press the stop or pause button while system is!It's in the manual

On the center unit ONLY:
While the system is turned off
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display

Posted on Oct 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

DVD Tray will not open it reads "Locked" how do i unlock it?


Tray Lock feature is on.
While unit is off press and hold 'stop' button for 5 seconds. You will see 'UNLOCKED'. To lock it again hold the 'stop' key again for 5 seconds 'LOCKED' will appear.

Oct 08, 2010 | JVC Audio Players & Recorders

3 Answers

My JVC TH-G30 gives me a locked message when I try to open the load tray what should I do?


hello Setting the disc ejection lock
You can lock the disc tray to prevent the disc form
being ejected.
When the main unit is turned off, hold down the STOP
key at the front panel for 5 seconds
If you attempt to open the disc tray by pressing
OPEN/CLOSE key, the disc tray does not open and
“LOCKED” appears in the display window.
To cancel the disc ejection lock, hold down the STOP
key at the front panel for 5 seconds again when the
main unit is turned off.
“UNLOCKED” is displayed in the display window.
Note:
Before the main unit is turned off, DVD/CD function
should be selected.

Mar 29, 2010 | JVC TH-G30 Theater System

2 Answers

I am getting the locked display


Hi Blackhawk,
This sounds like you've accidentally set the "tray lock" feature.
You can set this to stop unwanted tray ejections:
e7a7031.jpg


I hope this solves your problem..
Warm Regards
Mike

Nov 28, 2009 | JVC TH-M303 System

2 Answers

My dvd player is locked


If you are unable to get the tray of the dvd player open either the player will have a hole in front for you to stick a (I use a straightened out paper clip) into and press in towards the dvd player. It will manually open the drive so you can retrieve your dvd or there will be enough of a lip on the tray door you can grab it and pull it open manually. Then I would try unplugging the player and waiting a few minutes and plugging it back in and you might get lucky and it may never happen again. Good luck . Hope it works.

Jun 17, 2009 | JVC TH-M303 System

1 Answer

Dvd player is locked


If there was a dvd in the tray and the cable guy moved the dvd player, there's a good chance the disk might have slid off the tray and is now blocking the tray from opening. Also if the machine was moved there is a good chance the tray/laser lock might be on. It is a switch or button located on the bottom of your dvd player. Check your manual for exact placement. It is built in for shipping purposes so they don't get broken from rough handling. Hope this helped!

Jan 12, 2009 | JVC THC6 Home Theater System 5-Disc...

2 Answers

Tray locked


Dear friends,
I have solve the problem.power off the player and press and hold STOP+OPEN,CLOSE button.and than power on the player than display shows unlocked.the problem solved.and enjoy

Dec 30, 2008 | JVC THS55 System

1 Answer

Disc tray locked


there is a small hole outside the disk-tray. it may anywhere
put a thin needle inside that when the computer is on




warning: Be sure that you stand or touch on a wooden plank for safety

Jun 08, 2008 | Panasonic SC-HT70 System

3 Answers

LOCKED displays when attempting to eject disk from SA-HT670


i have a panasonic SA-HT720 and it displayed locked anytime i wanted to eject discs so i found out that dad27's solution was the best and holding down the stop and power buttons also locks the system as well as unlocking it. God richly bless u dad27 u really helped me out

Jul 27, 2007 | Panasonic SC-HT670 System

2 Answers

My dvd/cd try does not open when i press the eject button say "locked"


That means your trays are on Child Lock (this is a safety feature to prevent any accidental opening or closing of disc trays by small children when listening to your favorite tracks.)
To solve this, simply switch off your radio to Standby and hold the power button...whilst holding the power button, press open on the tray that is locked....the system will display UNLOCKED on the display of your hi-fi.

That should be it. To lock the tray....repeat the same process on the particular tray u want locked.

May 21, 2007 | JVC DX-T9 System

Not finding what you are looking for?
JVC TH-S11 Theater System Logo

Related Topics:

1,147 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69745 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...