Question about Washing Machines

1 Answer

LG wd 1049c washing machine doesn't spin out stops on 13 minutes. Is there a trouble shooting technique that can be used?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

We have had exactly the same problem with our machine. Had a tech come out and he said that it is a problem with the main motor which needs to be replaced. Still waiting to hear from them re cost of part, but did a search and found one online for around $211. Should be intresting to find out how much it will cost with labour etc.

Posted on Jan 09, 2011

  • tekura6 Jan 22, 2011

    I'm having exactly the same problem with ours - although ours goes down to one minute and then stays there endlessly, never going on to a proper spin. I would end it there and hang the clothes out dripping wet (at least they are clean), but of course, I can't get the door to open. It sounds like it is a problem with these machines, we've only had ours a couple of years too. Is there any way to get the door to open??

  • haveagreat Feb 24, 2011

    I have the same problem. When it gets to 1 min place it onto another "Spin" only cycle. It will then give it a full spin. At least that way you won't have to hang washing out wet.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My lg 7.5 kg wd 1049c doesn't want to spin

check if the belt has come off or snapped


May 28, 2017 | LG Washing Machines

1 Answer

Where is the lint collector on LG 7.5g model WD 1049C Front Loader washing machine.

The combo washer/dryer doesn't have a lint collector. Air is circulated through a condensate tube and is washed down during each drying cycle.

Jun 16, 2011 | Washing Machines

1 Answer

Hi. My LG 7.5kg Front Loader Washing Machine WD-1049C does not spin. It washes the clothes ok but fails to go into the spin cycle. The fault code UE comes up if i let it bumble through the cycle long...

Im soory to have to tell you this but i belive it is mostlikley the motor control board and it is worth a couple hundred dollars plus lobour it is the board benith the durm in the front right corner i hope im wrong on this i bet your clother are stuck in there with the door locked full of water there is a trick to draim then unlock the door by pushing in 2 buttons at the some time but i cant think of it right now ill try to post that trick if i recall it latter hope this helped

Aug 20, 2010 | LG WM-12230FB Front Load Washer

1 Answer

How do you get the gasket our of an lg wd-1049c

You will find this link helpful

We have a Free full video library on appliance repair video’s

and here is a link to our door seal section

and here is a video on door seal changes

Jan 13, 2010 | LG Washing Machines

1 Answer

LG WM-2277HW Front Load Washer CE error message


The CE is for Child lock system error. i just had one on my WD-1049C. It is a system used to prevent children from pressing the buttons.

the way I fixed it on mine is by holding the temp button and the option button at the same time.

Jun 28, 2009 | LG WM-2277HW Front Load Washer

1 Answer

Operating instructions for a wd 1049c washer

go to lg's website and put in your model # and you can download the manual

Jun 21, 2009 | LG WD-1041WFH Front Load Washer

1 Answer

LG WD-1049C Front Load Washing Machine Pump impeller sloppy

probably better change the pump if you feel any up and down slack in the impellor. you may have an ingress of water through the seal.

Mar 13, 2009 | LG WD-1045FH Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

821 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

76649 Answers

Brad Brown

Level 3 Expert

16010 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides