Question about Sylvania G-Netbook
ARE YU STUPID OR WHAT ? PEOPLE ARE ASKING HOW TO UNLOCK THE COMPUTER . NT THE WIFI STUPIDASS . PAY ATTENTION TO WHAT PEOPLE ARE WRITING .
Posted on Dec 14, 2011
If you are talking about the Sylvania SYNET07526, then I assume that you do not know your router password. This password (Network Key) was set up when you installed your router. You are going to have to reset your router. Normally your router booklet will tell you specifically how to do it. Ususlly there is a small hole on the side or back of the router that you put a straighten paper clip in and hold it for about ten seconds untill the router forgets its settings and reverts to factory. When it does this then your router does not have a password(Network Key) and is open to any one to connect up to. You must find out how to reset this password by setting up your router again. Go to the manufacturers site and search for your specific router and download the setup instructions.
If you are refering to the setup of the SYNETO07526, then follow the suggestions below.
It is looking for apassword (WiFi Network Key) You have to double click on the little computericon down in the right tool bar area, the one with the two side radiating arcs,and possibly has a small red X under it. The red X indicates that it is NOTconnected. When you double click on that icon a window called RT28701 opens up,then you click on Wireless Information tab, then you cursor down to the name ofyour WiFi and high light it and click the connect box. Then another windowopens up called Network Properties. Uncheck "The key is providedautomatically" box. This will allow you to type in your "NetworkKey", the password that protects your network from outsiders. This"KEY" was set up when you installed the router on your servercomputer. If this does not work at first, turn the machine over on it's backand using a toothpick, insert it into the little hole about an inch diagonallyfrom the right corner of the data plate, this will re-load a new copy ofeverything including the WiFi RT28701 driver. sometimes thisdriver gets confused. See my TIP at: http://www.fixya.com/support/r7350901-fix_synet07526_wifi_flashing AdditionalInformation When I try to signon with the red X showing, I get "The page cannot be displayed If I thendouble click on the icon down in the right corner I elucidated above, RT28701opens up to "Internet Protocol (TCP/IP) with all zeros in the IP addressfield, and Subnet Mask, with no entries in the default gateway. That is a clueto me that the auto sign on has not found a viable network or needs somethingelse. If I then click on Wireless Information tab, The list of availablenetworks appear in the box. The machine keeps trying to associate my previousentered name site with my prefered site and tells me the signal is good, but itcannot link up. This is a signal to me that it has lost my Network Key or thatthe software has failed or both. I then click on advance anddelete my prefered network and hit OK, this will force the software to ask mefor my network again, and notice that the prefered is missing. I click on thename of my network again and then hit connect., then the Wireless Networkproperties window opens up and I can insert my Network Key again after Iuncheck the "The key is provided automatically" box. I enter the keyand hit the OK button. I still do not get a connection, so I reboot themachine, and wait for about 30 seconds and the machine synchs up because thelittle RED X under the icon has disappeared. Now the machine will hook to theinternet as long as I want to, but sometimes when I turn the machine on it willnot synch, so I go through the above sequence again. The secret is once youhave entered your key and ask for the machine to synch up you have to reboot.Why? I do not exactly know, but I suspect that the WiFi driver looses it
Posted on Jan 06, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 12, 2012 | HP Computers & Internet
Jun 27, 2012 | Computers & Internet
May 21, 2012 | Acer Aspire 1691WLMi Notebook
If you have a Windows password reset disk, you can easily reset your Windows password with it. If not, you can follow the steps to create one. You just need an available computer linked to the Internet.
Step 1: Download and install Windows Password Breaker with the available computer.
Step 2: Run the program and burn a Windows password reset disk. It could be burned onto a CD/DVD OR USB flash drive.
Step 3: Turn to your locked computer, insert the newly created CD or USB to your drive. Reboot the Computer and reset the Windows password.
It is easy and safe to use.
Jan 31, 2011 | ASUS Eee PC 900 Notebook
Dec 21, 2010 | Acer Aspire 5315-2713 Notebook
Dec 16, 2010 | Computers & Internet
Dec 16, 2010 | Computers & Internet
Oct 29, 2009 | Computers & Internet
Jun 25, 2014 | Sylvania G-Netbook
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: