Question about VIA EPIA PX5000EG Motherboard

1 Answer

Board is not starting. how to install BIOS - VIA EPIA PX5000EG Motherboard

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • VIA Master
  • 27,725 Answers


Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ?
hope this helps

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway T5048 BIOS won't acknowledge ATA HD and no way to manually setup


Or you can buy a cheap 10 dollar ATA controller card to install.
But usely when the on-board controller starts to fail, other functions will also start to fail. If the ATA HDD can't be seen, a replacement board could help. If the drives are SATA, then get the raid drivers and install the drivers when windows asks if you have any software to install before windows continues - This would be for older main boards that didn't have SATA drivers installed in the BIOS.

Hope any of this helps - Have a great night.

May 26, 2014 | E-Machines Computers & Internet

1 Answer

No video on dell inspiron mini


If it happened after the installation of Win 7, then board malfunction if not very likely. Do you get any video on start up. The Bios should be displayed fine as it is not related to Win 7 OS. However if no display during startup would mean somehow your BIOS got corrupted during the installation. Flashing the BIOS might help

Mar 07, 2012 | Dell Inspiron Mini 10 Notebook

1 Answer

Installing Graphics cd in AGP slot...


Usually you need to disable the on-board video/activate the AGP slot in the BIOS before adding the video card. (Check your manual for entering the BIOS - often hit F1 or F2 (or enter when prompted) as you start the computer before the OS starts loading.)

I have no idea how you see the BIOS information without a working video to start.

Cindy Wells

Jun 07, 2010 | EliteGroup L7VMM2 (L7VMM2 NO CARD READER)...

1 Answer

This motherboard has been working flawlessly for months. Suddenly all entries in device manager starting with "system management bus" have the yellow Bang! symbol. The all say they need the driver...


This motherboard may need to have the firmware in the bios re-flashed with the latest version.
All functions in the motherboard need the bios. If the bios is corrupted, you will have problems similar to what you have stated.
Look up the bios on the Internet for the version of motherboard and the bios.
Re-flashing with the wrong version will ruin the motherboard's bios. Be sure you have the correct version and re-flash the bios.
Then try the board.

Aug 23, 2009 | Intel Desktop Board D845PEBT2 Motherboard

2 Answers

Put a e7400 2.93 cpu will start bios but no keyboard what other processor will fit.its a asus p5kc motherboard


Try reflashing your bios with latest version check usb is enabled in BIOS if your using a usb keyboard otherwise maybe a dodgy board. Good luck

Aug 01, 2009 | ASUS AiLifestyle P5KC Motherboard

3 Answers

Disk boot failure


Your boot sector is corrupted you need to install windows again from a bootable windows cd...

Feb 28, 2009 | Intel D845GVSR Motherboard

2 Answers

How install new bios


After updated your bios, did you check the boot sequence?
it might have been changed. Go in to the bios again and check so the boot setting is pointed that your pc starts from your HDD.
If you trying to reinstall the OS you should change tye boot to start from you cd-drive.

Good luck to you

If you find my answer helpfull, dont forget to vote

Dec 12, 2008 | Intel Motherboard

3 Answers

Reset motherboard bios


Fiend your solution direct from intel. Here is your solution........

bb03e0e.jpg

http://www.intel.com/motherboard/prob676ijt65/solution
85

Dec 26, 2007 | Intel D845GVSR Motherboard

Not finding what you are looking for?
VIA EPIA PX5000EG Motherboard Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top VIA Computers & Internet Experts

David
David

Level 3 Expert

781 Answers

Tony

Level 3 Expert

2600 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a VIA Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...