Question about Kenmore 882 sq. in. Cooking Area Gas Grill 14117327

Open Question

Kenmore gas grill 141.153373

How do I go about replacing my gas burner manifold. It looks like I have to take apart the whole top half of the grill to get at the two screws or bolts which they are all fastened to on each end panel.

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Screws fastening "tent" are corroded

Just had the same problem... I sprayed some WD-40 on both sides to loosen it, then used a damaged screw remover to pull it out. On one side, the head snapped off and I had to use the smallest-size extractor to directly pull out the shank, but it worked.

BTW, you don't happen to have the instruction manual, do you??

Posted on May 26, 2009

  • 43 Answers

SOURCE: Gas is not getting to the burners on my Sears Kenmore gas grill.

check if regulator fully screwed to tank, turn on tank,then last burner,should hear/smell gas. if not replace regulator

Posted on Jan 07, 2010

  • 43 Answers

SOURCE: I have a Kenmore natural gas grill, model #

owners manual can be gotten through the internet- find parts,type in model# of item, select manual sounds like valves are clogged- propaine and natural gasses are dirty gasses-no filter, it comes up out of ground,through dirty pipes, all the way to peoples homes- and thats why they have to replace valves on hot water tanks/furnuces........

Posted on Jan 07, 2010

  • 43 Answers

SOURCE: Replace main burner bracket - Kenmore 141.17227 nat gas grill

I've been screeming at my employeer about this design for years!!! I know what you are trying to do- I have to work on them,even in 90 degree weather!!!! Find the screws that hold that side panel on,remove screws, have someone else there to help you hold it in place- best to get the HARDWARE pack also, its new screws as the old ones will be rusted in, I've even had to grind some of the old screws to get them removed.. Good luck , at least you know someone else is having same problem...

Posted on Jan 07, 2010

  • 43 Answers

SOURCE: Kenmore Gas Grill will turn off after three burners are on.

replace the gas regulator the hose connector to propaine tank

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can the cooktop surface of my Kenmore gas range model 790.72903011 be removed

Most stove tops are removable for that very purpose.... after you remove the burners and the grills above the burners.... look for an edge and inch or inch and a half below the top... get something strong like a large screwdriver and place cloth over the tip to prevent scratching the stove top. there are VERY STRONG CLIPS holding the stove top to the stove, pry upward until the clips release. then slowly remove the spark igniter (TAKE A PICTURE WITH YOUR CELL TO REMEMBER HOW PUT BACK TOGETHER)

Jul 30, 2014 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

One of the tubes will not light up? It fell over in the wind. I cleaned up the grill and now that tube will not light. The ignightor is sparking but not flow of gas? what to do?

Remove the offending burner, check it for crimps or debris inside that was dislodged when it fell over. Also check the venturi valve on the open end of the burner for damage or blockage. While the burner is out, look at the burner orifice to make sue it's still in place and not clogged. If all of the aforementioned checks out Ok, the burner manifold valve may have gotten damaged beyond repair and will need to be replaced.

Hope this helps you to troubleshoot and solve the problem.

Apr 17, 2011 | Kenmore 882 sq. in. Cooking Area Gas Grill...

1 Answer

Half of the burner does not light on a 3 burner kenmore grll

If the burners being most Kenmore grills use iron burners my guess is the burner is rusted you can buy replacements at sears parts online

May 17, 2010 | Grilling

1 Answer

No gas to the burners. Replaced the regulator and

If you have replaced the regulator, you may have a blockage either in the venturis of the burners or in the orifices, you will have to take it apart to check.

Jan 09, 2010 | Kenmore Grilling

1 Answer

Grill does noty get hot

try opening the tank very slowly. if you open it too quickly the overfill protection devise in the tank will restrict the gas flow to the burners. hope this helps.

Sep 10, 2009 | Kenmore Elite 900 sq. in. Cooking Area Gas...

1 Answer

Gas is not getting to the burners on my Sears Kenmore gas grill.

check if regulator fully screwed to tank, turn on tank,then last burner,should hear/smell gas. if not replace regulator

Jun 25, 2009 | Kenmore 16225 Grill

1 Answer

What is the bottom of the kenmore gas grilled called?????

Hello Dee,
Sorry you didn't get exactly what you thought you were getting but you should be able to find the model of the oven section ( top part of grill) and locate a tag of some sort that youcan bring with you to Sears ( they market Kenmore) Service deskand they should be able to track down all the parts you need to complete it ( You'll be looking for the base cabinet that matches the oven ).. They should also be able to provide you with assembly directions too.. Good Luck...

Sep 13, 2008 | Kenmore 700 sq. in. Cooking Area Gas Grill...

1 Answer

Kenmore 4 burner grill only lights 3 burners

Looks like your regulator is not venting properly to relieve the back pressure. The best thing you can do here is replace the regulator.

May 27, 2008 | Kenmore 490 sq. in. Cooking Area Gas Grill...

1 Answer

Burner adjustment


Mar 08, 2008 | Kenmore 632 sq. in. 16324

2 Answers

Kenmore gas grill 141-16228

I would love to know the answer myself, I can't figure it out now that I have the grill half taken apart.

Jan 14, 2008 | Kenmore 700 sq. in. Cooking Area Gas Grill...

Not finding what you are looking for?
Kenmore 882 sq. in. Cooking Area Gas Grill 14117327 Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Grilling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gary Kenady
Gary Kenady

Level 2 Expert

140 Answers

Paul Carew

Level 3 Expert

2873 Answers

Are you a Kenmore Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides