Question about Magellan GPS 320 GPS Receiver

1 Answer

Does not pick up satellite signals - Magellan GPS 320 GPS Receiver

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

The gps device is not receiving signal simply because the strength to receive signal is weak. What you have to do is to reset the gps device by holding the power button for about 15 seconds or there about, then you release it when the gps restarts. It will acquire signal after resetting the device.If it does not acquire satellite signal. You can also try to use the gps in an open space where the gps will be facing the sky, if it does not, then you replace the antenna of the gps device.

Hope this information helped.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kp-57ws510 plays perfectly through vcr but refuses to pick up satellite feed


The VCR puts out a video signal. The satellite feed is an RF signal that requires the tuner to be working.
Your TV probably ewon work with an anttena either.

Sep 26, 2014 | Sony Televison & Video

1 Answer

My tomtom is not receiving any satellite signal


You should use your computer to update the QuickFix positions of the Satellites (they do wander in the sky). To get signals you should be outside buildings with an unobstructed view to the sky.

Jan 18, 2014 | Tomtom One GPS

1 Answer

Gps singal lost


Often, when your GPS is in a "covered" area ... e.g. inside a building, in a tunnel, under a bridge, amongst / under tall buildings, etc... when there is no open space (directly) between your GPS and the satellites, your GPS will loose its satellite signals. If you're in such locations, try to find some "open space" and wait a bit for the signals to be picked up again.
Another common reason why the GPS doesn't get signals, or doesn't get the signals quickly, is because the "latest" satellite positions (locations) have not been updated in your GPS. If/when you connect your GPS to your computer (e.g. using HOME ) and download the GPS satellite (QuickFix) location information, your GPS will have the most recent locations of the satellites in your vicinity/region. With this information, your GPS can pick up the signals more quickly ... instead of having to search/scan around to find the signals ... which can take a bit more time. While your GPS is searching for the satellite signals, it shows the "signal lost" or "no GPS signal" message.

Jan 16, 2014 | Tomtom GPS

1 Answer

Nuvi 200w will not pick up sattalites


Make sure you are outside and as much in the open as possible. Staying stationary is the best way to insure a satellite signal. Give your GPS a few minutes if necessary to pick up a satellite signal. Also remember poor weather can effect a satellite signal reaching your GPS, just like it will satellite TV.

Mar 08, 2011 | Garmin nuvi 200W GPS Receiver

1 Answer

No satellite signal pick up


Yes ! 3 years is at the end of the expected lifespan of the battery

Jun 30, 2009 | Garmin Forerunner 205 GPS Receiver

1 Answer

My 1 year old tomtom will not pick up satellite signal


couple of things, battery not fully charged (AC)
No view of the sky
burned out SIIRF CHIP

Jun 18, 2009 | Tomtom ONE GPS Receiver

1 Answer

Cannot locate saltellite or Acquiring satellite


The error means it can't pick up valid GPS signals. In other words, bad reception.

Has the unit ever worked? Does the unit have an internal or external antenna? Are the batteries fully charged?

Try the unit outside with clear view of sky instead of in the car. This will give it the best chance of picking up a GPS signal.

If it still doesn't then suggest something broken inside.


May 20, 2009 | Garmin nuvi 200W GPS Receiver

1 Answer

Does not pick up cable satellite signal


Do you have the satelite hooked threu the regular cable input? If so hook it thru one of the video inputs instead; composite video or component video. the picture and sound will be better and you will be by-passing the problem area of your Tv ( the tuner).

Apr 24, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Satellite won't pick up a signal


just keep moving the satellite dish untill its in a perfect position.

Dec 20, 2008 | RCA DIRECTV Satellite Remote Control

Not finding what you are looking for?
Magellan GPS 320 GPS Receiver Logo

849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Jungle Ghost
Jungle Ghost

Level 2 Expert

154 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...