Question about Philips Magnavox 50ML8105D 50" HDTV DLP TV

Open Question

On a Magnavox model AS305 with turn table.. Power indicator light does not light up. No power to any of the componants (phono,tuner. tape decks). Unit was playing but suddenly quit playing and I was unable to turn system back on. Is there a fuse within the unit that can be replaced, or what may be the problem? Please help ---STUMPED!!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

brandonboyce
  • 84 Answers

SOURCE: Unit power up and have sound.

did your light bulb burn out?

Posted on Jun 19, 2007

  • 2 Answers

SOURCE: TV power problem

Does anything else work in the same outlet?
Also do you have it plugged into a power strip?
Unplug it wait about 20 - 30 seconds and plug it back in see if it resets its self

Posted on Jan 02, 2008

Ecollier2012
  • 3459 Answers

SOURCE: power issue

www.magnavoxhelp.com sell kits to fix this common problem.
Hope this helps,
Ed

Posted on Jun 24, 2008

Ecollier2012
  • 3459 Answers

SOURCE: Phillips 43P8341 no picture, blinking red light

Goto www.magnavoxhelp.com. They have a kit that will fix this common problem.

Posted on Jul 04, 2008

ladywinn
  • 5138 Answers

SOURCE: Magnavox 50" DLP will not turn on after bulb went out

If Fan is not runnung set will not come on.

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn my turn table on. POWER button is on. What other button do I push. I have phono, mono/st, cd, tape, tuner??


Phono button is turntable selector. May be the turntable switches on when you move the arm to the edge of the record.

Dec 17, 2014 | RCA Spirit Of St. Louis Radio/Cassette/CD...

1 Answer

When machine is switched on, the light will not appear where it says tuner, phono, tape and cd and the machine makes a noise as if its not starting up properly?


The unit would have to be looked at to see what the problem is- it could be a belt but also other things. When questions are done the brand and model number would help with an answer as otherwise we don't know what you are talking about.

Sep 21, 2013 | Sony Audio Players & Recorders

1 Answer

Can I connect a tape deck *and* a turntable to the Sony STR-DE595?


If your turn table has a magnetic cartridge it will not work,Becuase the ner recievers are not equip with a phono preamp, They are equip to only use a crystal or ceramic cartridge in the turn table.

Sep 29, 2012 | Sony STR-DE595 5-Channel Amplifier

1 Answer

Aai have the following AKAI Audio Stereo System and no Idea how to connect them. Please help Akai Model AP-D210 turntable Akai model CS-F14 Stereo cassette deck Akai model AT-K110 Fm Am Tuner Akai...


In general, outs to ins.

If nothing else, get the manuals for the preamp and the EQ. You'll probably have to pay for them.

Google it.

Akai PR-A04 preamplifier << This is the control center and where everything comes together.

Akai AP-D210 turntable (ONLY to jacks that say "PHONO"
Akai EA-G40 Stereo Graphic Equalizer (in the Tape 1 Out/In set)
Akai CS-F14 Stereo cassette deck (in the Tape Out/In set of the EQUALIZER) *
Akai AT-K110 Fm Am Tuner (to the Tuner inputs)
Akai DT-100 Audio Tuner (to the Aux inputs)
Akai PA-W04 Amplfier (to the amp outputs)

* This will allow you to Equalize the Tape on the Record or the Playback side.

Read some audio magazines or websites. Get to understand Tape Monitor Loops.

Don't use excessive EQ.

Mar 17, 2011 | Akai Audio Players & Recorders

1 Answer

I need manuals for hooking up my fisher stereo system model ca 871 amp fm 871 tuner cr-w890 tape deck eq 867 eq can not find manuals


I can't even find a reliable picture of the amp but it's not rocket science.

The Tuner output goes to, say, FM or Aux on the am, anything BUT Phono, which is ONLY for a turntable.

The EQ output goes to the first available Tape In; Input Comes from the same Tape Out. Select that tape function to engage it in line with any source and the downstream electronics (second tape, tone, volume, speakers).

The tape deck output goes to Tape In; Input comes from Tape Out. If there is not a second tape loop on the amp, nest the Tape Deck into the EQ's Tape loop. They always have at least one to replace the one they use. Select THAT tape function to engage it in line with any source and the downstream electronics.

Mar 13, 2011 | Audio Players & Recorders

1 Answer

What are the classification of simple machune


Hi,
Specifications Display Image Aspect Ratio: 16:9 Widescreen Modes: Conventional 4:3 Comb Filter: 3D digital Additional Features: V-Chip, parental control Diagonal Size: 42" - widescreen Display Format: 1080p (FullHD) Resolution: 1920 x 1080 V-Chip Control: Yes Image Contrast Ratio: 2500:1 Brightness: 500 cd/m2 TV Tuner Stereo Reception System: MTS Secondary Audio Program (SAP): Yes Analog TV Tuner: NTSC Video Features HDTV Ready: Yes Analog Video Input Signals: NTSC Input Video Formats: 1080p Remote Control Type: Remote control Audio System Sound Output Mode: Stereo Sound Effects: Virtual Dolby Digital Speakers Included: 2 speakers Additional Features: Mute button Speaker(s): 2 x right/left channel speaker - built-in Connections Connector Type: 1 x composite video input ( RCA phono ) ¦ 1 x S-Video input ( 4 pin mini-DIN ) ¦ 3 x audio line-in ( RCA phono x 2 ) ¦ 2 x component video input ( RCA phono x 3 ) ¦ 3 x HDMI input ( 19 pin HDMI Type A ) ¦ 1 x digital audio output (coaxial) ( RCA phono ) ¦ 1 x audio line-out ( RCA phono x 2 ) Power Power Device: Power supply - internal Power Consumption Operational: 240 Watt General Product Type: 42" LCD TV TV Tuner: 1x analog, 1x digital Width: 41.3 in Depth: 10.2 in Height: 29.7 in Weight: 55.1 lbs HDCP Compatible: Yes Digital Television Certification: HDTV Digital TV Tuner Digital TV Tuner: ATSC, QAM Additional Specifications HDMI: Y More Information Model No.: DP42848 Shipping Weight (in pounds): 67.0 Product in Inches (L x W x H): 41.3 x 10.2 x 29.7 Assembled in Country of Origin: USA and/or Imported Origin of Components: USA and/or Imported Walmart No.: 000503420

hope this will be helpfull to you.
GoodLuck

Feb 02, 2011 | Sanyo 42 in. LCD TV

1 Answer

Having a hard time connecting various audio components


Yes, it is a little tricky...

1) CD Changer (output) -> CD input on Amp

this is tricky... this will allow you to record to your tape deck, and control the sound via the EQ:
2) Tape Deck (tape out / recout) -> TAPE PLAYBACK on EQ
3) Tape RecOut on EQ -> Tape 1 Playback on Amp
4) Amp Tape 1 RecOut -> Tape Deck Playback / Input / RecIn
in essence, your creating a loop starting from the tape deck, going to the eq, then to the amp, then back to the tape deck to record.

Your EQ has another set of LINE IN and LINE OUT - use the second Tape 2 on the amp to create another loop. This will
allow you to control the EQ for any of the other sources.
5) LINE IN on EQ -> Tape 2 RecOut
6) Tape 2 Playback on Amp -> LINE OUT on EQ

5) Radio Tuner (output) -> Tuner input on Amp
6) DVD/VCR Combo Output -> AV/AUX on Amp

7) PC Computer... you don't have room for this. You can either use the PHONO input, and you'll have to purchase a Line Level Phono Converter
or, get a Y cable and split the signal and share with some other source.

Hope this helps.

- OPTiC
www.djproaudio.com
www.repairny.com

Dec 13, 2008 | Technics SH-GE90 Home Equalizer

1 Answer

Low Audio


You need to connect the turntable to a PHONO input on your amplifier. Not all amplifiers have a phono input, if yours doesn't you need to get an RIAA pre-amp to plug your deck into & this connects to your amplifier.

This is because although the audio outputs on the turntable look the same as all the other components, they are very different. The signal has not been amplified up to line-level like tuners, CD players, tape decks, etc. You need to get this thin, weak signal boosted.

Your 3 options are:

* Connect directly to the PHONO input on your amplifier if you have one. If you don't:
* Connect deck to a RIAA amp (also called a phono stage) then connect to any input EXCEPT phono on your amplifier
*Connect the deck to a DJ mixer then hook the mixer up to any input on the amp EXCEPT phono.

Dec 23, 2007 | Technics SL-1200M3D Turntable

Not finding what you are looking for?
Philips Magnavox 50ML8105D 50" HDTV DLP TV Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...