Question about Whirlpool Kitchen Ranges

1 Answer

I am looking for directions for replacing the ignitor for my Whirlpool SF376PEW Gas Range

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 525 Answers

Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

You will need a product service manual to assist you in servicing the the proper model number of your gas range. Below are 2 links for a service manual.

http://www.servicemanuals.net/service.aspx
http://www.repairclinic.com/SmartSearch/SmartSearch.aspx

If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO REPLACE AN IGNITOR FOR A WHIRLPOOL GAS


Remove the oven bottom and the burner. The ignitor is removed from the burner and it will either be a direct plugin or will be attached with the supplied ceramic wire nuts. Do not use regular plastic ones they melt.....
Eric

Oct 12, 2009 | Kitchen Ranges

1 Answer

WHIRLPOOL Sup Cap 465 oven turns on for 3 sec, then shuts off


The flame sensor is dirty or bad.

When the unit does not sense flame after ignition, the gas valve shuts down the system.

They can become corroded or dirty, but usually just need to be replaced.

Contact whirlpool for warranty info. If the unit is under warranty, they should send you the parts for free. If not, they can direct you in how to order the part.

http://www.whirlpool.com/custserv/email_form.jsp

Sep 26, 2009 | Amana AGDS902 Gas Kitchen Range

1 Answer

Whirlpool gas range - new ignitor is not getting hot


Do you have 120 between ignitor feeds/wires?if not put a jumper between 2 connections on gas valve,.If ignitor comes on ,bad valve .if not bad tstat/control issue

Jun 20, 2009 | Dynasty DGRSC 30 Gas Kitchen Range

2 Answers

The range on Whirlpool Super Capacity 465 will not ignite


You need to replace the oven ignitor. This is located under the bottom pan of the oven. Take out the racks and then remove the 2 screws from the back section of the lower plate. Then you will find the ignitor. The ignitor may still get red but the ignitor has to draw enough current to open the gas valve. This is a very common problem. Replace the ignitor and this will fix your problem.

Feb 06, 2009 | Whirlpool GS460 Gas Kitchen Range

1 Answer

WHIRL POOL OVEN BURNER WILL NOT IGNITE


the porcelain always remains white its the glow bar toward the end that will glow, you will need to check for power leading the ignitor, if indedd you have 110v, there replace ignitor very common issue with gas ranges

Nov 20, 2008 | Whirlpool GS475LEKS Gas Kitchen Range

1 Answer

Oven gas valve wont come on


your valve is bad replace it the ignitor needs to darw a min of 3.5 amps to open the valve if it is drawing the amps then the valve is bad

Jan 23, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

Re:Whirlpool SF310PKE gas range


When the oven safety valve refuses to open and let gas through, it's almost always because not enough current is flowing through the ignitor. Often an aging ignitor will appear to be glowing pretty brightly but still won't draw enough current to make the valve open. The first thing to try replacing is the ignitor.

You describe your ignitor as "red and glowing" but oven ignitors normally get a lot brighter than "red" -- well into what I'd call yellow.

Dec 19, 2007 | Whirlpool SF310PEK Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...