Question about Nova Development Photo Explosion Deluxe for PC

1 Answer

I already loaded Photo Explosion 4 perfectly on second HP computer using same 64 bit Win 7 OS, so obviously not problem with Disk they sent me and not a Win 7 Problem. However, the DVD Drivers for the internal DVD drive on each computer are different, could this be the issue?

Posted by on

  • 2 more comments 
  • karalacey Jan 01, 2011

    The below was post in November.



    By karalacey on Nov 11, 2010


    Cannot Install Photo Explosion Deluxe version 4 on my HP Running Windows 7 on 64 bit operating system. Already requested new install cd and received with same results. Error is: Error 1335 The cabinet file Data1.cab requested for this installation is corrupt and cannot be used. This could indicate network error, an error reading from CD Rom or problem with this package." Even tried cleaning NEW Disc to no avail!

  • karalacey Jan 01, 2011

    Other DVDs and CDs work fine!

  • karalacey Jan 01, 2011

    This program never loaded. Why would I use system restore? When purchased

  • karalacey Jan 01, 2011

    Got it working! Ran Sys Mechanic 10.0, cleaned up registry and it has loaded and runnning Photo Explosion now!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello.

It depends on what problem you are experiencing or error you are receiving. If the DVD is not loading, your disk drive could be dirty or faulty, especially if other CDs or DVDs don't run.

Some program or problem may be interfering with the install process.

It would be helpful to know what specific problem are you experiencing or error message you are receiving.

Hope this helps.

Posted on Jan 01, 2011

  • 2 more comments 
  • NinaE Jan 01, 2011

    Hello, again.

    Thanks for your response.


    There can be several causes for this problem,
    including corrupted files within the Windows Registry. Use System Restore to see if you have a Restore Point from before the trouble started. To check this in Windows XP,
    go to Start->All Programs->Accessories->System Tools->System
    Restore. Select "Restore ..." and you will get a calendar showing the existing
    restore points. Choose the date when your PC was working fine.

    If still a problem, this error also can occur because of the antivirus or the
    firewall that you have installed in your system. First, disable the antivirus or
    firewall protection and now do the following:


    Click on Start ->
    Start -> Run -> CMD -> type CMD and press enter. And in command
    prompt enter the following commands:







    msiexec
    /unregister (press enter)
    msiexec /regserver (press enter)
    Now you should be able to install the program
    without any error. Keep the firewall and antivirus off until installation is complete.

    Hope this resolves your problem.

  • NinaE Jan 01, 2011

    Ooops ... totally forgot that you are running Windows 7. System Restore works with Windows 7 as well. Open the Start Menu. Click on All Programs, Accessories, System Tools, and System Restore.

  • NinaE Jan 01, 2011

    The error message indicates a problem with the Registry or malware on your system, preventing this program from installing. From your answer, sounds like you have not experienced any other problems with your computer. But, I would suggest trying System Restore and go back several months, for example. See if you then can install the program. If you are experiencing problems with your computer, like a slower response time, then malware is indicated.

  • NinaE Jan 02, 2011

    Great ! Thanks for using FixYa.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Epson Perfection 2450 Photo scanner won't run on Win 7 Ultimate.


is windows 7 32 bit version or 64 bit version . Suggest downloading drivers that match the windows 7 operating system and installing them.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14558&infoType=Downloads

.

Mar 22, 2015 | Epson Perfection 2450 Photo Flatbed...

1 Answer

I am not able to install hp lj 1300 drivers in win 7 64 bit os , please help me


According to HP, you don't need to download drivers from HP for this product for Win 7. Just use the Add Printer wizard function of Win 7 to go to the Microsoft Update site and get the driver from there. Follow the directions in this link:

HP LaserJet Driver support included in Windows 7 or in Windows Update

Jan 14, 2015 | HP Office Equipment & Supplies

1 Answer

Palm Desktop 6.2 +Hotsync 7


Here is the link to the hp forum that contains a link for the win 7 and 8 drivers. http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/64-Bit-Windows7-8-8-1-USB-drivers-for-Palm-Desktop/td-p/2159769

Aug 12, 2014 | Palm Tungsten E2 Handheld

1 Answer

How to reload windows 7 on hp pavillion a810n


First, here are Microsoft's recommended minimum system requirements:
http://windows.microsoft.com/en-GB/windows7/products/system-requirements

You will need to have upgraded your memory from the system you had delivered first of all, to either at least 1GB (for 32-bit Win 7) or 2GB (for 64-bit Win 7). In either case, 2GB would be better.

Take your Windows 7 disks (CDs or DVDs) and reinstall it. Possibly you will have an 'upgrade' version of Windows 7. (Your computer was originally shipped with Microsoft Windows XP Home Edition, Microsoft Service Pack 2. If you use your recovery CDs or the Recovery partition on your hard disk, this OS will be the one you get)

25.April.2014

Apr 19, 2014 | Microsoft 7 Computers & Internet

1 Answer

Qc848enu-Compatibility issue in Win 7 64 bit


Hello

It depend on the CPU if it is 32bit or 64bit. Windows 7 64 supports 32 bit software and 64 bit I suggest re-installing the software. It depend on the software if they have 64bit and 32bit you should install the version your PC is. Sometime 32 and 64 bit are embedded in software.

Feb 05, 2014 | Logitech qc848enu.exe

1 Answer

Hp photosmart c5280 driver windows 7


HP has the drivers for supported OS versions for the Photosmart C5280 All-in-One on their site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3204464& . Select your OS in the drop down menu and then click Next. Expand the section marked Driver, then you will see the link to the Full Feature software. (You can order a CD if you like from the link marked Order Physical Media.)

Do you have the 64-bit or the 32-bit version of Windows 7? To find out, click Start > Control Panel > System and Security > System. If the version title ends with x64, then you have the 64-bit version and need the Win 7 (64 bit) software from HP. Otherwise, get the 32-bit version.

The direct link to the full software for Win7 x64 is http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74848-1&cc=us&dlc=en&lc=en&os=4063&product=3204464&sw_lang= .

Please note: if you connected the printer to the computer already, you may have obtained the OS generic printer driver. Disconnect the data cable and remove this printer driver before installing the HP software. (This applies to USB connections.) The generic driver will only work for the printing features of the all-in-one.

I hope this helps.

Cindy Wells

Sep 30, 2011 | Office Equipment & Supplies

1 Answer

This used to work perfectly on windows XP. I now have windows 7 & after downloading the Photo Explosion 2.0, it won't open & the programme just freezes. Help.


Downloading means you retrive any files and save to your PC/Laptop from any web source!
Installing means you install any software/programs to run on your PC/Laptop.

As for your software "Photo Explosion 2.0" could not run on Win 7 due to software "Compatibility Issues".

You can try, using "Win 7 compatibility mode" installing older software read this LINK

NOTE**
"There is no guarantees older software will work using Win 7 compatibility mode!"

Hope it helps.

Nov 11, 2010 | OnDemand Photo Explosion Deluxe 2.0 for PC

1 Answer

Use to be able to scan a document and save as a PDF, got new computer with windows 7 now I'm unable to save as PDF


Hi,
you need to use the driver for win 7. If you have already installed the software using the installation cd, you need to uninstall it first before using the win 7 driver by going to start menu > programs > lexmark 5600 series > tools> uninstall. Then reboot pc. Check the version of your operating system. Right-click on My Computer and choose properties to see if you have a 64-bit or 32-bit OS. Download the proper driver package by going to this link: http://bit.ly/cclHPL . download cj5600Win7en64.exe is for 64-bit OS. or download cj5600Win7en32.exe for 32-bit OS. install the sw and try scanning again. Hope this helps.

Mar 08, 2010 | Lexmark X5650 All-in-One InkJet Printer

4 Answers

Installed 4 G of RAM. Installed Windows 7. Only 3 G RAM Usable


Hi,
To recognize more than 3GB of RAM you will need a 64 bit version of the operating system. If you install Windows 7 32 bit (normal for most users) you will only see 3.
You should have both versions of Windows 7 (32bit and 64 bit) on your installation disk. However you will need a 64 bit capable processor to install it. Otherwise 3GB of RAM for a 32 bit operating system is more than enough.

Mar 08, 2010 | MSI PT880 Neo FSR Motherboard

Not finding what you are looking for?
Nova Development Photo Explosion Deluxe for PC Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nova Development Computers & Internet Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

Computer Links

Level 3 Expert

2385 Answers

John Hong
John Hong

Level 3 Expert

787 Answers

Are you a Nova Development Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...