Question about Apple iPhone 3G

1 Answer

IT DOES NOT TURN ON ALL READY - Apple iPhone 3G

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Apple Master
  • 4,338 Answers



Perform these resets in order, if first does not succeed:

If iPhone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe



Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot connect to network. It show IP address 0.0.0.0


contact your service provide for assistance on how to set it up

Apr 28, 2015 | HP LaserJet P2015n Printer

1 Answer

In tvs speed 40 printer all led light are blinking


follow these steps
1) Press ST1+READY button together
2)Turn on the tvs speed 40plus passbook printer
3) The 4 LED will blink 4 times. Release the button ST1+READY immediately after 4 blinks
4)PRESS ST1 - ST1+READY+EJECT starts blinking
5)again PRESS ST1 - ST1+EJECT+ST2 starts blinking
6)again PRESS ST1 - ST1+EJECT starts blinking
7)again PRESS ST1 - ST1+EJECT starts blinking
8)again PRESS ST1 - READY+EJECT starts blinking
9) printer is READY wait and PUT PAPER.
10) The paper goes in and comes out 3 times. will take about 2 minutes.
11) Paper ejects automatically after printing.
12) turn off the printer and turn it on.

Jan 24, 2014 | Office Equipment & Supplies

1 Answer

We have the AF-351 plugged and ready to turn on but it doesn't turn on how do we turn it on.


http://cache.air-n-water.com/manuals/newair-af-351-manual2.pdf read this manul might be of use

Jul 13, 2013 | Heating & Cooling

1 Answer

I mistakely deleted pictures from my camera (Kodax Esay Share M340) Move picture to internal memory.How can i get the pictures back


If Try one or more of the following

Ready light does not turn on and the camera does not work.

Ready light blinks green.

  • Camera is operating normally.

Ready light blinks amber.

  • Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

Ready light glows steady red.

Ready light is off or glows steady green.

  • Camera is operating normally

Mar 10, 2011 | Kodak Cameras

1 Answer

My bunn cwtf 15 wont put out hot water and the ready light wont turn off dustain


If your ready light is on and your water is not warm... sounds like the thermostat is too low. Inside the front panel (behind the brew basket) there is a thermostat adjustment on the left-hand side. If you turn that up your ready light should shut off. You can then adjust the temp to your desired level. (194-200 degrees depending on roast, grind, etc...)

Jun 14, 2010 | Bunn CWTF15-TC

2 Answers

Should the power light be green or red, when I turn camera on it shows a green light then turns red


Red light indicates that the camera is out of charged., Try to charged your battery for 3-4 hrs if you encounter flashing red on a fully charged battery you need to call kodak 1 800 235 6325 ext 12

You can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer

Nov 16, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

Printer won't print labels


Try resetting the printer:
Note: it will erase all network settings.

Turn the printer off, press and hold the GO button, turn the printer back on, continue holding the GO button for at least 10 seconds, but for fewer than 20 seconds. After the Go, Attention, and Ready LEDs turn on, release the GO button. During this process, the Attention LED will turn on, the LEDs will begin to cycle, and the unit will perform a cold reset until the printer returns to the Ready state.

NOTE: If either the Go or Ready light turn off or no LEDs turn off before the GO button is released, repeat the process.

For PCL XL error: try to reinstall the printer drivers.

Oct 11, 2009 | HP LaserJet 2550L Printer

1 Answer

Right now, I can not get it to even print


Did you check the cables?
Turn off your printer - Turn off your computer
Turn on your computer
Turn on your printer
Go to printer folder, open the printer and cancel all pending jobs
The printer must be "ready"
If the printer is not ready, replace the cables (USB or similar)

Oct 01, 2008 | HP Office Equipment & Supplies

1 Answer

Laserjet 2015n powers up for 2-3 seconds - but no lights come on - and then it powers down.


Hello,

Please perform the following.

Super NVRAM initialization Turn off the printer.
  1. Press and hold the Go button.
  2. Turn on the printer and continue to hold the Go button for at least 50 seconds. During this process, the Attention , Ready , Go lights turn on. Then the Attention and Ready lights turn off, leaving only the Go light illuminated.
  3. Release the Go button. The Go , Ready and Attention lights turn on.
  4. Press and hold the Go button. All lights turn off. During the next three seconds, the Go , Ready and Attention lights turn on in that order, one per second.
  5. Release the Go button to perform the initialization. The control panel lights begin cycling from front to back. After the Super NVRAM initialization process is complete, the printer returns to the ready state.

Sep 19, 2008 | HP LaserJet P2015dn Printer

2 Answers

Ready light on my SB-800 speedlight


put in a fresh set of batteries. The ready light won't turn on until the flash capacitor is fully charged. And if your battery is weak, it can take very long (minutes!) to fill the capacitor. You still can fire the flash even it is not ready, it will just dump whatever power it stored in the capacitor.

Jun 12, 2008 | Nikon Speedlight SB-800 TTL Flash

Not finding what you are looking for?
Apple iPhone 3G Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

371 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...