Wont work with windows 7 pc cant see my camers when i plug it to pc

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Windows Photo Gallery or Picasa.

when you install windows it tells you that u wont be able to go back. 2 options restore or recover your pc. restore your pc to a time before you installed. Make sure you back up your files before you recover your pc

try downloading the driver for 5735 webcam driver for windows 7 , try Bison or Suyin camer driver http://www.support.acer.com/drivers_download.aspx

Please get it downloaded here : www.givemefile.net > ... > Camera & Foto > Digital camera
www.jvc.com/
www.helpdrivers.com/cameras/JVC/

Best regards

Right, well your problem is very common, it is due to Windows 7 (I have it) not having very many drivers built-into it for cameras, and my own Sony camera driver is not in 7 either ok. So you are going to have to download your films from camera to PC with a cable called Firewire because USB cable wont work without windows drivers, firewire will.
Lets just hope your PC if it is not old has a Firewire socket at rear, as older PC wont have one.

install Windows 7 compatible driver

I had the same issue straight out of the box after buying on 'OneDay". I then connected it to my Windows 7 PC via micro usb cable, and it stayed on, a blue screen came up asking to connect as "PC" or "PC Camer", I selected PC. Windows 7 found the drivers. I then saftly removed the device, and it has come on fine ever since :)

This particular camera works well under everything from Windows 98 - Vista 32-bit. However, under Windows 7 64-bit, it fails to work due to there being no drivers for it. It is a very adequate camera, well-designed and could be used for many years to come if current/working drivers were available.

The final version of Windows 7 has not been released yet, you most likely have the RC copy of Windows 7 (ie Release Candidate - final beta version just before official release) the RC is available to anyone to download and test.
The problem is that not all device drivers are avaiable and if you cannot get a Windows 7 version from the manufacturer's WEB site at this stage, you have to wait until it is available.

I suggest you uninstall the webcam and the IM. Restart the PC and install the webcam with the camera unplugged. Install the IM. Plug the camera and let Windows detect the camers and load its drivers, then configure the IM.