Question about Linksys Wireless-G WRT54G Router

1 Answer

I need the website address to reset my router...when I got to 192.168.1.1 it says this is a site for Linksys and is only accessible through their website?? Can you help me?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

To reset the wireless router please follow the below procedure.

Please be aware the if u reset the wireless Router you will loose all your configuration and you have to reconfigure the wireless Router.

Please press the tiny black button at the back/beneath of the wireless Router and keep pressing for 2 minutes. The sys light will start blinking slowly and then rapidly. then release the button and wait for 2 minutes for the device to boot up with factory default settings.

Once you are done you can connect to 192.168.1.1 ip address and it will open the your Linksys Router management web page where you can reconfigure your wireless router again.
192.168.1.1 is the default IP for your wireless Router, Its not hosted any where in the internet.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LINKSYS as for password, it is locked


Press and hold the reset button of the Linksys router using a pointed object (like a paper clip or pen) for 30 seconds.


The reset button is located in the back of the Linksys router closest to an Ethernet port.

The button is recessed to protect you from accidentally resetting the modem.


Unplug the Linksys router while pressing the reset button.


Shut down your computer for one minute.


Plug the Linksys router back into the wall outlet.


Reboot your computer.


Open your web browser to access a website.

Type the below in the address bar if you want to reset your password:

http://192.168.1.1


A prompt from the site will request a user name and password.

The user name stays blank, or, in some models, is "admin".


Navigate to the security tab. Input your new password to protect unauthorized access to your router


hope this helps

Sep 17, 2012 | Linksys E3000-rm 802.11a/b/g/n 2.4/5ghz...

1 Answer

My LINKSYS ask for password, it is locked


Press and hold the reset button of the Linksys router using a pointed object (like a paper clip or pen) for 30 seconds.


The reset button is located in the back of the Linksys router closest to an Ethernet port.

The button is recessed to protect you from accidentally resetting the modem.


Unplug the Linksys router while pressing the reset button.


Shut down your computer for one minute.


Plug the Linksys router back into the wall outlet.


Reboot your computer.


Open your web browser to access a website.

Type the below in the address bar if you want to reset your password:

http://192.168.1.1


A prompt from the site will request a user name and password.

The user name stays blank, or, in some models, is "admin".


Navigate to the security tab. Input your new password to protect unauthorized access to your router


hope this helps

Sep 17, 2012 | Linksys E3000-rm 802.11a/b/g/n 2.4/5ghz...

1 Answer

I need to get into my nat settings


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 09, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

Linksys no longer appears on my laptop for some reason. how do i restore it. i can't go on line without it?


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 08, 2010 | Linksys WRT160N Wireless Router

1 Answer

How do I find Key# for a new PC. The PC with the actual LInksys Admin Program was on PC that crashed and couldn't be fixed


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 07, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

Forgot user name and password


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 06, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Help me access linksys router website. if i type 192.168.1.1 an error appears.


Typing the IP address will not get you to the Linksys WEB site.
The Linksys/Cisco WEB site is -
http://home.cisco.com/en-us/wireless/

The configuration URL for for configuring the Linksys wireless settings is -
http://192.168.1.1
The default login = admin
The default password = admin

Sep 11, 2010 | Linksys WRT160N Wireless Router

2 Answers

Cannot access linksys ip website


MAYBE SOMEONE CHANGED IT.PRESS THE RESET BUTTON FOR 30 SECONDS.IT WILL REVERT TO FACTORY SETTINGS.NOW THE IP WILL BE 192.168.1.254.(IT MUST BE ON TO RESET SUCCESFULLY)

Oct 05, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Router is blocking a site


if you can then just reset your router to factory reset option on your router's backside

if you want to go manualy
1 connect any pc to your router
2 go to internet explorer
3 type 192.168.1.1 (which is default ip address for any linksys router)
4 once got access of your router
5 go to access restriction in router
here you can find blocked services / blocked sites and blocked urls find out your services and remove it from that list
and save setings and restart router

Mar 26, 2008 | Linksys Wireless-N WRT150N Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...