Question about Computers & Internet

1 Answer

If I include CRLF or CR or LF inthe body of an email message using SMTP on EasyGPRS the email is sent but there is no confirmation from the server. If I send the same email without any CR or LF characters the email sends and the confirmation is received. How can I overcome this problem? I need to send files with CRLF in them. Regards Graham Wilkins Gtek Computers

Posted by on

  • gtekcompu311 Jan 01, 2011

    Thank you for your reply.

    I will need to have several CRLF's in the email as it is lines of data (Six) from a data logger. Also it appears that it does not matter where I put CRLF or a single CR or LF in the email. Just for info--- The email always gets sent, but the reply that it has been sent never comes from the ISP. I have to use Telstra as the ISP as this is the only ISP with coverage in the area my customer is using. I will check with using Vodafone as the ISP and see if it is any different. I still need to work around solution.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello, Graham.

You include at the end of your email message rather than CR or LF or CRLF in the email.

Hope this resolves your problem.

Posted on Jan 01, 2011

  • NinaE Jan 02, 2011

    I just realized that my comment should have read:

    Hello, Graham.

    You include ( ) at the end of your email message rather than CR or LF or CRLF in the email.

    (Put the cr and lf in carats.)

    Hope this resolves your problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am unable to setup my email wizard in my samsung corby


Standard instructions for email inbox setup:

i have finished my corby pro email settings & i can send and recieve emails. the problem with only recieving & not able to send is the confusion between port numbers. in secure connection box three options available ' off ', ' SSL ', ' TLS '. use only SSL or TLS because the port numbers for SSL & TLS differs. just try this & you will be able to send and recieve emails.

                                                    SMTP port - 465

                                                    POP3 port - 995

Enable POP in Gmail. Don't forget to click Save Changes when you're done.Configure your client to match the settings below:Incoming Mail (POP3) Server - requires SSL:pop.gmail.com
Use SSL: Yes
Port: 995Outgoing Mail (SMTP) Server - requires TLS or SSL:smtp.gmail.com (use authentication)
Use Authentication: Yes
Port for TLS/STARTTLS: 587
Port for SSL: 465Account Name:your full email address (including @gmail.com or@your_domain.com)Email Address:your email address (username@gmail.com orusername@your_domain.com)Password:your Gmail password

Unless you're using recent mode to download mail to multiple clients, make sure you've opted not to leave messages on the server. Your Gmail settings determine whether or not messages stay on the server, so this setting in your client won't affect how Gmail handles your mail.

Please note that if your client does not support SMTP authentication, you won't be able to send mail through your client using your Gmail address.

Also, if you're having trouble sending mail but you've confirmed that encyrption is active for SMTP in your mail client, try to configure your SMTP server on a different port: 465 or 587.

You're now ready to use POP with your Gmail address.

Mar 08, 2011 | Samsung S3653 Cell Phone

1 Answer

OUTLOOK ERROR 550 5.7.1 Your email contained wrongly placed script tags. Please correct this (try setting your mail program to use plain text) and resend your message. PLZ REPLAY FAST


If you are receiving an error when sending email using Outlook:

"The message could not be sent because one of the recipients was rejected by the server. Server Response: '550 not local host, not a gateway', Port: 25, Secure (SSL): No, Server Error: 550, Error Number: 0x800CCC79"


Open your Outlook settings (Tools > Accounts)
Go to View/Change email account for the email account you are having problems with.
Check that the SMTP Server is set to yourdomain.com
Go into the "More settings", "Outgoing Server" tab and make sure that the option "My server requires authentication" for the Outgoing server is checked ON.


Save and close all windows.

Try again.

If the problem continues then the problem is that your Internet Service Provider is blocking the mail server. ISPs do this to prevent spam on their network. When this happens you will need to use the mail server that they provide you instead of your own. The mail server is generally smtp.yourISPname.com, however, it could be different so please contact your ISP to get the details.

If you do not want to use your ISPs server for SMTP, and the ISP is blocking port 25, you can switch the port to 587 for your outgoing mail and use mail.yourdomain,com for the SMTP server name.

Mar 01, 2011 | Computers & Internet

1 Answer

The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was 'fkb@ameritech.net'. Subject '', Account: 'pop.attyahoo.com', Server:...


One problem is that the incoming (POP) mail server shown in the error message appears to be incorrect. The server address should be "pop.att.yahoo.com" (with a period between "att" and "yahoo"). The incorrect mail server address may interfere with authentication of the sender's email address, which is needed before the outgoing message is sent.

The "530 authentication" message indicates your outgoing (SMTP) server likely requires "server authentication". Also, the "Port 25" message indicates your email program is currently trying to send via Port 25, with no SSL; but Ameritech/Yahoo accounts appears to use Port 465 with SSL enabled.

See more on sever settings for "ameritech.net" users:
http://www.dslreports.com/faq/5535
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/61941/~/i886---at%26t,-bellsouth,-sbcglobal,-ameritech-email-settings

I would suggest you check the settings for your Ameritech email account in your email program. You may need to correct several settings. The steps to access account settings are somewhat different for various email programs (Outlook, Windows Live Mail, Thunderbird, etc.). You should be able to find guidance in the "help" section of your email program.

Feb 05, 2011 | Outdoor Concepts OCI AD20 27 Stainless...

1 Answer

We cannot scan to email from our Sharp AR-M237 Multi-function "Error[973]: Incorrect format for Primary SMTP Server." I am using all the settings for SMTP that I use everywhere else. HELP?-pjm


Model AR-M257 - I have several Sharp MFP devices at different locations and all are set up to scan through our email server using a special account I have just for this purpose. I have all of them setup using the external IP address of our Exchange server (not its name or FQDN) and I have firewall rules setup to allow SMTP from the WAN IP addresses of our different offices to the LAN IP address of the Exchange server. It worked at all the others but this one. I was getting the following error when trying to send a status message (under Log) from the device to my email account as a test: [error 973] incorrect format for primary smtp server. And when I tried to scan through our email server I would get "network error". However, a connection test succeeded. I had everything set correctly for SMTP and DNS but as I was trying anything I could to get it working I went to mDNS under Services and it was enabled. I disabled it and then I could get a status message to be sent to me and we could send a scan through our email server.

Apr 12, 2010 | Sharp AR-BC260 Color Copier

1 Answer

No email can not be sent or compuse or reply


After deleting and recreating an account in Mail, you might not be able to send emails even if you can receive them. When you try to send a message, this alert may appear:
"Cannot send message using the server smtp.xxxxx.com"
This happens if the Simple Mail Transport Protocol (SMTP) server, used for outgoing messages, was incorrectly entered with the first account even if it was correctly entered for the replacement account.
Products Affected Mail
Resolution You should first verify that the network connection you're using is the correct one for the ISP that you want mail to communicate with.
  1. Open Mail.
  2. From the Mail menu, choose Preferences
  3. Click Accounts.
  4. On the Outgoing Mail Server (SMTP) pop-up menu, choose Edit Server List.
  5. Delete all entries for the SMTP server that is mentioned in the error, and click Done.
  6. Configure the current SMTP server by clicking Server Setting.

    Note: If you need to use multiple SMTP servers for multiple Mail accounts, see this document.
  7. Send a test message to your email address.

Jun 02, 2009 | Yahoo Mail

1 Answer

The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'a.tia62@yahoo.com'. Subject 'testing', Account: 'mail.eastern.com.ph', Server:...


Greetings,
this is a server rejected recipient error message for Outlook/ outlook express. mainly if this is a correct email address that you were trying to send the email on then you need to check for the configuration settings for Outlook express.
Goto Outlook express- higlight mail tab- select the user a/c- click properties on right- goto server tab check that server is
incoming: pop3.eastern.com.ph
outgoing: smtp.eastern.com.ph
click save
Regards,
TechSup1

May 01, 2009 | Computers & Internet

1 Answer

Someone sent a spam instant message from my yahoo ID. Is it possible to do this without having my password?


Yes, this can be sent from another server if yahoo do not require something called SMTP Authentication when sending emails, see
http://en.wikipedia.org/wiki/SMTP-AUTH

Mar 15, 2009 | Yahoo Messenger

1 Answer

Outgoing message does not go with Outlook 2007


It sounds like your SMTP settings are incorrect, if you are using a POP3 service, it can connect and download your email, but most ISP Mail SMTP servers dont allow outgoing mail from another ISP.

Example, I have a charter.net email account but I have wireless hometown as my ISP, so I have to set my POP3 settings to my charter.net account (incoming messages) and my SMTP settings to wireless hometown smtp server for (outgoing mail)

Mar 10, 2009 | Microsoft Office Outlook 2007: Windows

3 Answers

Message could not be sent. Server rejected sender's email address


the message could not be sent because it rejected as the sender

Jan 15, 2009 | Computers & Internet

2 Answers

Email Address Problems


You must enter a DNS server on the "Network Settings > TCP / IP" page. If you're unsure of it, try copying your default gateway.

Jan 31, 2008 | Samsung CLX 3160fn All-In-One Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...