Question about Computers & Internet
you configure this device, note that when the AP is configured through
an Ethernet connection, (via RJ45 Network Cable) make sure the manager
PC must be set on same the IP network. For example, when the default
network address of the default IP address of the AP is 192.168.1.1,
then the manager PC should be set at 192.168.1.x (where x is a number
between 2 and 254), and the default subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.1.1 (the factory-default IP address setting) to the address location. Please refer here to the Latest User Manual for Encore ENRWI-G Page 9 onwards describes the login details.
Hope this Helps!
Posted on Jan 01, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 17, 2015 | Levelone Level One FreeCon 802.11G Outdoor...
the router to the factory defaults will delete any changes you have
made to the router, including any security settings. This should be used
as a last resort.
The first method involves simply pressing a button located on the back of the router. The image below (courtesy of Linksys) shows where the button is located.
Linksys WRT54G Reset Button Location
To reset your router, use the following steps:
Sep 24, 2011 | Linksys Wireless-G WRT54G Router
To perform hard reset on your Linksys router, follow the steps below:
NOTE: The location of the Reset button may vary for every model.
If the normal reset does not work, unplug and re-plug the router's power adapter while pressing the Reset button.
You can also reset the router via its web-based setup page. Follow the steps below to learn how.
Resetting the Router Using the Web-Based Setup Page
Access the router's web-based setup page. To learn how, click here.
NOTE: To learn how to access the web-based setup page on a Mac computer, click here.
Click the Administration tab then click on the Factory Defaults sub-tab.
NOTE: If the screen on your router's web-based setup page is different, click here.
Under the Factory Defaults section, click on the Restore Factory Defaults button.
The default settings of your router are now restored.
Sep 20, 2011 | Linksys WRT54GX2 Wireless-G Broadband...
Aug 23, 2011 | AGPtek TPLink TLWR740N IEEE 80211bgn...
Mar 02, 2011 | Computers & Internet
Mar 02, 2011 | Belkin (F5D5231-4) Router
Jan 01, 2011 | Encore WIRELESS LAN EXTENDER
In Management section, you can Backup/Restore Setting, Firmware Upgrade and Reboot the system in following pages.
If you act the function, the ip address will restore the establishing value situation.
192.168.1.20 in the IP Address field and 255.255.255.0 in the Subnet Mask field.
Hope this helps!
Dec 19, 2010 | Computers & Internet
Jan 30, 2009 | Microsoft MN-700 Wireless Router
Feb 27, 2008 | D-Link AirPremier DWL-2700AP 802.11g/b...
764 people viewed this question
Usually answered in minutes!