Question about Kenwood Audio Players & Recorders

1 Answer

I have a Kenwood KRF v5200d audio video control center that worked great for 2 years . It is just out of warranty and is now giving problems. It turns on for about 15 seconds and then cut out and goes into standby mode ( the red light blinks) I have tied turning the power on and off with the button down. I have also changed power supplies and put it on a filter monster board all to no luck. Any suggestions

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 155 Answers

I'm not the perfect expert in this but did you try removing all speaker,rca,s video, etc from the back and seeing if something maybe back feeding to the receiver. the red light blinking usually means its detecting a short somewhere and it goes in a fail safe mode to prevent more damage. if it stays on with everything disconnected the problem is with something else. try them one at a time to isolate the problem. hope this helps thank you.

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood Auto video surround receiver DR / 409 how to reset it


PDF]KRF-V8030D VR-409 - Kenwood

manual.kenwood.com/files/B60-4593-00.pdf
VR-409. INSTRUCTION MANUAL. KENWOOD CORPORATION. B60-4593-00 (EN) ...on the country and sales area. AUDIO VIDEO SURROUND RECEIVER ...

Kenwood VR-409 Manuals

www.manualslib.com > Brands > Kenwood Manuals > Stereo Receiver
View online or download Kenwood VR-409 Instruction Manual. ... Kenwood Instruction Manual Audio Video Surround Receiver KRF-V8030D VR-409.

Kenwood VR-409 Receiver Repair Questions, Solutions ...

www.fixya.com > Forum > Audio & Video Receivers > Kenwood
Recent Kenwood VR-409 Receiver questions, problems & answers. Free expert DIY tips, support, troubleshooting help & repair advice for all Audio & Video ...

Kenwood VR-409 PDF Owner's Manual Download & Preview

www.manualguru.com > Kenwood Manuals > VR-409

Feb 03, 2016 | Kenwood Audio Players & Recorders

1 Answer

Connecting ps3 receiver


buy a optical cable and connect between PS to the amplifier or take the optical out from the TCL to the amplifier and select optical in,

Oct 19, 2013 | Kenwood Audio Players & Recorders

1 Answer

Kenwood krf v5300d


I'd Google "Kenwood KRF V5300D remote control". Surely you will find a replacement available from someone. This worked for me to find one for a LG BluRay player.

I found them in the UK for example, at http://www.findremotes.com/remote-controls-1/kenwood-remote-controls-krfv5300d-1238517.htm

Oct 13, 2013 | Audio Players & Recorders

1 Answer

I NEED A manual for a krf v5200d



  • Hope this helps.

Nov 02, 2011 | Kenwood KRF-V5060D Receiver

1 Answer

Kenwood KRF-V5200D, will not turn on. I'm getting 240V in, but only geting 900mV at the pins to Transformer CN201. Apparently it was dropped, the height was 1/2 to 1 foot. Is there a schematic diagram...


Unfortunately, I do not have a schematic diagram. However, having delt with these kinds of problems on TVs, stereos, VCRs, etc., I would say, over 90% of the time, you won't need a schematic to figure out the problem. Chances are that a solder joint slightly cracked, and possibly broke a trace. I would inspect the circuit boards carefully, especially the legs of the transformers, relays, and capacitors. Unless you can find another owner, the schematics are usually hard to find, and when you do, they can be expensive, so I would try spotting some physical damage before expending the money for a schematic. You only need them maybe once every 10 or 20 years on these machines, normally. Good luck, hope you can see and fix the problem!

Apr 27, 2010 | Kenwood Audio Players & Recorders

1 Answer

Music, sound effects no dialogue


MAKE SURE YOU HAVE ALL THE AUDIO SELECTIONS ON UR PS3 CHECK THE BOXES ,,IN THE AUDIO SETUP

May 14, 2009 | Kenwood KRF-V5060D Receiver

1 Answer

I have a brand new kenwood krf-v5200d amp. when I turned it on the first time it when't straight to the standby light blinking. I have checked all speakers and they are connect correctly. Any idears


#1 check the batteries in your remote,#2 if this is a new system contact the the dealer(let them handle it)i'm sure they will make it right.(what i'm saying,is don't void your warranty buy trying to fix it your self.enough said!thanx for using fix-ya!!!

Nov 29, 2008 | Kenwood Audio Players & Recorders

2 Answers

KRF-5030D i stand by mode


Does it go into standby when it's in another mode like : Cd or Video 1 or tape?

When you state that you checked the power amp IC's , how so did you do this?

Thanks n' let me know.

Feb 08, 2008 | Kenwood KRF-V5060D Receiver

1 Answer

Increase AM bandwidth to 531khz to 1700khz


ya am booster antenna of the am output u could try 1st or u saying teh kenwood limites u to 1620 max only ch >

Jan 23, 2008 | Kenwood KRF-V5060D Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

Eddie Dalton
Eddie Dalton

Level 2 Expert

53 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...