Question about Flat Panel Televisions

1 Answer

Service shop They told me it's a power supply. I just noticed, that we communicate on two postings. The part # you gave me is right. I even have a picture that I can e-mail to you. I hate to change it and find it was a mistake.  Can the power supply be repaired?  I'm not trying to be cheap, but I'm tired to be fixing new things. It seems to be happening more often nowadays. THIS TV IS 2 YRS OLD AND A FEW DAYS AGO I GO TO TURN IT ON AND NOTHING HAPPENS.....NO POWER I HAVE CHECKED THE FUSE...IT'S FINE. ANY SUGESTIONS

Posted by on

  • Jaime Hernandez May 11, 2010

    What is the model and manufacturer of your TV?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

The power supply can be repair, but many service techs rather not to, because they are switching power supplies and it can be a bit more difficult to fix them.
Many power supply components failed because they are expose to high heat generated internally when the TV is working, if the capacitors are working with temperatures of 170-185 degrees fahrenheit, their life expectancy is about 1000 to 1500 hours.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi plasma lg tv 42px4mvh-ta when i switch on it does's not switch on, i contacted technician the Guy told me that the main power supply board has a problem of suppling power how will you assist me


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jun 15, 2016 | LG 42PX4DR 42 in. Plasma TV

1 Answer

My tv Sony KDL-40NXLL WONT POWER ON AS MY LED RED LIGHT IS NOT ON


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Feb 23, 2015 | Sony Flat Panel Televisions

1 Answer

"Have a Hitachi 55HDS69. Black screen, has sound. have been told grand baby had been turning on and off. I just got it out the shop 3 months ago having the board replaced, but i would NEVER take it ba


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.


25380851-nvi2segetoqhshhqabeh4qiu-2-1.jpg 25380851-nvi2segetoqhshhqabeh4qiu-2-2.jpg

Jan 24, 2015 | Hitachi UltraVision 55HDS69 55 in. Plasma...

1 Answer

My magnavox tv worked good turn it off later tryed to turn it on and it wont i notice the green light on the power button wasn't on


Fault with the main power supply regulator section. Either it will be on a separate board, or on the part of its main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Nov 27, 2014 | Toymax Magnavox 37MF331D 37 in. LCD TV

1 Answer

I noticed that my tv would blink off for a few seconds then come right back on, this happened intermittantly for quite a while, months, until finally it blinked off and has never come back on... i sus


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Nov 12, 2014 | Flat Panel Televisions

1 Answer

Vizio VX42L Color issues


Main board or power supply are possible or a handshake issue where communication is not happening correctly.

Apr 28, 2012 | Vizio 42 in. LCD TV

1 Answer

Now i've noticed a crackling + no picture, but still great sound


This is something of an off brand model and about the only advice I have is if someone takes it apart---begin by a physical exam of plugs etc and then do some voltage checks in the power supply.

You might want to also GOOGLE the brand/model number to see if any parts are even available for it.

My guess is parts are slim or do not exist.

Mar 15, 2012 | Element Electronics FLX-3211B 32 in. LCD...

1 Answer

Toshiba 46RV525U are JUNK!


The LCD panel is defective. They are expensive. Call customer service and they may extend the warranty for you if you complain enough.

May 27, 2010 | Toshiba Regza 46RV525U 46 in. LCD HDTV

2 Answers

Service shop


Is the power supply completely dead ? If so with this model of power supply its very common for the resistor 3318 on power supply to go out. Causing the power supply to completely die. Take out the resistor 3318 its a 470 Ohm 1W resistor. check it if it doesn't read around 430-530 Ohm Its gonna be bad ( most likely ith will read in the mega ohms. Replace with a 470 Ohm 2 W resistor. Also check power supply for cracks

Apr 29, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

2 Answers

TV's on. No Picture...No Sound


Have a problem with Zenith 37 HDTV. Medel number: Z37LZ5D As wathcing TV, along with 'pop' sound, TV went dead. LG service center gave an advice to unplug the power cord and press ON/OFF power switch about 1 min. Then plug power back and turn on the TV. Well, the green light blink for a while and solid green, but still no screen, no audio. Search the Web and someone suggested to replace Power Supply Board which will fix the problem. Again, search the Web and came out with Power Supply Board. LG Electronics/Zenith 'Power Supply Assembl' with $124.95 from PartStore.com. Is it the right solution? Do I have to replace entire Assembly Board? not just replacing some fuse? Any cheaper way to do? If I have to replce PSA board, any suggestion to how? Comment posted on Apr 22, 2009 I have a basic knowledge of electric and electronics, such as rewiring entire house for renovation and assemble entire computer from scratch.
Actually, the TV belongs to my father and the problem that I stated was based on what he told me.
So the question is based on the symptom that I posted, how sure are you that the problem is the Power Supply Board?
Is it good to order PSB? Comment posted on Apr 23, 2009 Purchased 2 and half years ago. Expired one year warranty. Comment posted on Apr 23, 2009 Zohail,
This is LCD TV.
There is no problem with the wall socket nor current.
I put other appliances on same wall socket and worked.
It has to be internal problem.
As I mentioned on the main post, there was a 'pop' sound while watching and TV went dead.
Turn on remote control, there is blink green light and then green stays on, but no sound, no screen.
Turn off remote control, light turns red. Comment posted on May 14, 2009 I fixed the TV.
Orderd power supply board which cost me $136.51 total.
Replacing was simple.
Just removed the rear panel cover then electronic board housing cover.
Took power supply board with all the connector cables and replaced with new one.
Problem was a transformer connector which got burned and blow up the plastic cover.
But no problem with fuse and capacitors.

Thanks all for advises.

Jan 01, 2008 | Zenith Z37LZ5D 37 in. LCD TV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...