Question about Acer Computers & Internet

1 Answer

Comes on then goes out - Acer Computers & Internet

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

LCD type? make/model number?It does the same with another PC?
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Igniter comes on and flame comes on. Igniter goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame goes...


It sounds like the sensor that determines that a flame is present is not working. Find this sensor by looking for a device that is exposed to the flame and has wires going to it. Check this sensor and replace if necessary.

Sep 12, 2013 | Dryers

1 Answer

Dodge 2500 dodge diesel 5.9 what are the cables coming off driver side battery going to ,there are about 3 or 4 cables coming off terminal.


one goes to the other battery, one goes to the fuse box one goes to the alternator one goes to starter.

Mar 24, 2013 | Cars & Trucks

1 Answer

Starts up goes to start windows then goes off and comes back to start again


It is more than likely the hard drive, or the window files are corrupted, if you have a backup recovery disc try it now, no change! have the hardware tested.

Jun 23, 2012 | HP Compaq Evo n610c Notebook

1 Answer

Engine light comes on goes off, then comes back on and goes back


I THINK that it means there is a code stored. How is it running and starting?

May 12, 2010 | 2000 Harley Davidson FLHR-FLHRI Road king

2 Answers

Power light comes on and then goes off.


power light comes on and then goes off

Dec 08, 2009 | Acer Aspire 3680 Laptop

2 Answers

Sony KLV-S32A10 32 when i turn on picture come then goes off


If the Standby light is blinking at the front panel of the TV, it seems that there is an internal malfunction occurred in the TV.
I will forward a link to a page where you can get more information and troubleshooting steps for this issue.

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C399467

Please perform the steps provided on the page. If the issue still persists then service of the TV is required.


Jun 09, 2009 | Sony KLV-S32A10 32 in. HD-Ready LCD...

1 Answer

Sony cybershot 7.2 When you turn it on the lense comes out and goes in and comes out and goes in on and on and on till you turn it off.


this is a lens array problem probably due to the fact you have dropped it down to floor. the only thing you can do is take it to nearest sony service center and get the lens array replaced. it costs aroung 60$.

May 31, 2009 | Sony Cyber-shot DSC-W120 Digital Camera

1 Answer

Trying to hardwire my mini fridge in my popup. I have a blue and a gray wire coming from the condenser and a black and a white wire coming from the thermostat control, and a white and a black wire coming...


ok the black wire from the powersource goes to the (-)negative terminal in the converter, the white wire goes to the (+) positive.
From the converter the white wire goes to the white wire on the termostat.
the thermostat black wire goes to the grey wire on the condenser
the blue wire on the condenser goes to the black wire on the Conveter.

Mar 27, 2009 | Refrigerators

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

635 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...