Question about Intel Motherboard

2 Answers

Pc does not start

Hello, I have a pc with configuration > gigabyte 8ipe1000, 1gb ram, 250 gb hard disk, FX 5600 graphics card. After pressing the ON button, the systems gets power, fans on but the screen does not turn on and the two leds of hard disk and power stay permanently on. No further progress. Please help

Posted by on

  • kseftilas Jul 11, 2008

    The pc does not beep at all, just stays stuck. The only thing I did before it started doing this, was to remove my 2.1 speakers by unplugging them... I tried removing all the RAMs one at a time, I tried another PSU, I tested another CPU, I reset the battery, I tried another graphics card but to no avail. Since I am now on holidays, I will give it another try when I get back. Thanks all for your advice

  • Dave May 11, 2010

    Does the PC beep? Have you changes anything recently?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 52 Answers

When it starts to power up, right click to access the bios. check boot sequence. choose drive D or E, whatever your harddrive is designated as.If boot sequence A, floppy drive. or B CD drive and there is no disc or CD in place it will ask for system disc and go no further. If you have a win 2k or XP disc put it in the CD drive , reboot, and when it asks"boot fromCD?" click yes. Then it will ask you " do you want to check for errors or reinstall windows.from there it's up to you.good luck, John

Posted on Nov 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 233 Answers

Unplug the power supply the to let the capacitors on your board discharge , then rest the bios or de-attach the battery for a while
the put every thing back again.
if the problem still exists check wither you have a burnt capacitor on the mother.
if the problem still exists check the cpu (if it is too hot) it may be burnt out.

Posted on Jul 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PC stuck at the post screen


please give me whatsapp to my number 8011011314

Jan 13, 2014 | Gigabyte Motherboards

1 Answer

I need to purchase one. How do I go about doing this?


Hello and welcome to fixya.

First of all you need to mention why you have to buy only one motherboard and not any other parts of a computer.
Questions that need to be answered on this matter are as below:

(A) Are you replacing an old/broken motherboard on your computer? -> If so please replace with the same model or one from a similar range of models as this would eliminate any further hardware compatibility issues, especially for old motherboard brands or discontinued brands.

(B) Are you upgrading your hardware of your computer to support more RAM, more hard disk drives, better graphics card or RAID? -> If so please check according to the other peripherals you intend to install (GFX card or amount of RAM or Hard Disks that you have in mind installing) and based on that information order the most appropriate motherboard model.
If you intend to do RAID, many higher Gigabyte motherboard models or ASUS will do the trick. Same goes for graphics cards or if you intend to install dual graphics cards (via SLi technology).
Also, RAM and CPU types are important to buying a new motherboard, please see more for Motherboard CPU sockets, chipsets. As for memory check if it is dual or single channel and check what type is your RAM DDR2 or DDR3 and at what frequency (MHz) they operate.

(C) Do you have some spare parts only and looking to just change a motherboard to setup a new pc from the beginning? -> If that is the case, then you should be looking for lower-end brands like Foxconn, Superchip, Acer etc. These might be also compatible with older hardware and do what you need them to do, but of medium quality.


Overall there are couple of software that can help you gather information about your current system configuration:

1 - CPUZ RAM, CPU, Chipset information etc..
2 - HWMonitor RAM Detailed information (Voltage types etc..)

Please let me know if this is enough to get you started or need more information.

**PLEASE RATE THIS SOLUTION ACCORDINGLY!**

Regards, FixYa.

Thanks.

Mar 27, 2011 | Motherboards

3 Answers

I want to install win7premium32-bit to my pc


It requires at least 2 gb ram and c2 duo or higher. Be sure you have that min with your pc. next you need windows cd. insert it int drive and press F3 or any key to boot with cd. It's then very simple just do as pc says. In format using type choose NTFS next just proceed as directed and you are done.

Dec 14, 2010 | Motherboards

1 Answer

How to install saound card for NEC versa E6200 for


Hi,

First off that notebook is not Windows 7 capable. Here are the WIndows 7 requirements:
  • 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
  • 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
  • 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
  • DirectX 9 graphics device with WDDM 1.0 or higher driver.
But, if you want to add a PCMCIA Sound Card you can do that. Just google PCMCIA Sound Card and you'll find a ton that are available.
I might suggest a new laptop.

Thanks Mark

May 12, 2010 | NEC Versa 6200MX (158-026241-000C)...

4 Answers

Compatible with windows 7


Hi,

yes its compatible with windows 7.

Nov 21, 2009 | Motherboards

1 Answer

Hello, I have got the board gigabyte


First of all try using onboard graphics to start with. Reset CMOS(pull the round watch-style battery out) and let it sit for about 2 minutes. It states it is an SLI board but you are running ONE card. If you have luck with the onboard graphics working, download the drivers from OMEGA DRIVERS. I use them in every PC build I have done. The CD with the drivers may have been on the shelf for MONTHS! Also be sure that you have the single graphics card in the PCIExpressX16 slot, and not the X8 slot. The X8 slot would be used IF you running a second card in SLI mode.

Jun 07, 2009 | Gigabyte Motherboards

4 Answers

Increase graphics card memory


go to your bios setting > chipset feature > onchip AGP.
you can increase your Graphic card from ther if it is on bourd.

Jan 28, 2009 | Asrock P4I45GV R5 Motherboard

2 Answers

Gigabyte Motherboard Drivers


i am useing same system. you can receive these drivers through E/mail. mention yr e/mail address.

Nov 22, 2008 | Motherboards

1 Answer

My PC freezes!!


please add another 1 gb RAM to your system. then the computer does not get freezes

Jun 17, 2008 | MSI KM4M-L Motherboard

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...