Question about Pinnacle Studio MovieBox Plus - Video input adapter - Hi-Speed USB - NTSC, SECAM, PAL

1 Answer

I have a pinnacle moviebox 510-usb. The specification contains, you can streaming from analog secam source, but in importer section i can't see any video after switched secam mode, while the vcr play secam video. Can i digitalized from analog secam source, please?

Posted by on

  • csehi_gabor Jan 01, 2011

    the same as enviroment working and can recorded, when the vcr play PAL vhs source. I change the casette to secam and change the settings from pal to secam, the preview window get black.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 179 Answers

Be sure that your MovieBox capture device is selected under Studio's "Setup/Capture Source" selection (assuming you're capturing analog). If the MovieBox doesn't show up in that selection window, there could be a problem with the device.

Additionally, check in the Diskometer left-hand panel (this is found at the center of the bottom of the screen) and see that the correct input port value (either composite or s-video) is selected.

If you're capturing digital, then you'll have to use a Firewire connection to the MovieBox device.

Hope that's helpful.

Posted on Dec 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 7 driver for Pinnacle USB MovieBox -


http://www.latestdriversupdate.com/driver/45412.html

Jul 09, 2010 | Pinnacle Video Transfer

1 Answer

Capture working from camera but not from movie box VCR analoge input


Check the Image source if well shielded. Weak or broken shield in cable will affect the video-sound quality. Try different cable and analog video source. Once you ensure that nothing is wrong at input side. Uninstall-Reinstall the driver and the accompanied software also update driver and the software from Pinnacles support website.
Here is the link for the latest downloads and updates
http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Family/Studio+version+9+Support/Contact/Contact+Support/

Good Luck

Jan 21, 2008 | Pinnacle Studio MovieBox DV 9 (210100349)...

1 Answer

I need power adapter volt/amp


Looks like maybe 3.3 volts, 1.5 amps not sure of the polarity.

The Pinnacle Studio MovieBox DV Includes
  • MovieBox DV external analog to DV converter
  • Full version of Pinnacle Studio 9
  • Hollywood FX transitions
  • TitleDeko for titling
  • 4pin/6pin IEEE-1394 FireWire cable
    6pin/6pin IEEE-1394 FireWire cable
  • Power Cord
  • Power supply: 110V 60HZ 3.3V/1.5A
  • Studio Software 9 manual
  • MovieBox DV hardware manual

Dec 12, 2009 | Pinnacle Studio MovieBox DV 9 (210100349)...

1 Answer

Does moviebox usb work with studio 14 and vista? I can't get my camera to show as an import device when connected to the movie box.


This is the latest hardware device that can used for Studio 14.

Check the list.

USB based
  • 710-USB
  • 510-USB
  • 700-USB
  • 500-USB
  • MovieBox Deluxe
  • DVC-103
  • DVC-107
  • DVC-100
  • DVC-90
  • DVC-130 (There are no 64-bit drivers for this product.)
  • DVC-170 (There are no 64-bit drivers for this product.)
PCI based
  • 700-PCI (a.k.a. Pinnacle Studio Deluxe 2)
  • 500-PCI (a.k.a. Pinnacle AV/DV)
  • Any 1394 cards.

Are you using vista 32 or 64 bit system? If Vista 64 bit there is no driver for your device and the only available is 32 bit only. Aside from that you can check also the video cable you were trying to used. If firewire under import/capture tab of Studio 14 you need to select the name of your camcorder or dv camcorder. Check that out and try.










Dec 07, 2009 | Pinnacle Studio MovieBox USB Video Capture

1 Answer

Computer not recognising VCR- what plug should i use?


You need a TV tuner card to be able to read both audio-video signal, else how are you going to covert analog to digital. The VCR gives out analog output.
........sodeep

May 08, 2009 | Pinnacle Studio MovieBox DV 9 (210100349)...

1 Answer

Moviebox Power Adapter


If you call Pinnacle, they may have a spare .. I thought Iost it and called them. They had it and would sell it for $15 (includes shipment).

Dec 17, 2007 | Pinnacle Studio MovieBox USB Video Capture

1 Answer

Pinnacle MovieBox USB Power


You can use a universal one but it has to be 3.3 Volts at 3 AMPS and the tip of the plug must be positive. If you have a radio shack by you they should be able to get you the correct adaptor.

Thanks,
Mark

Nov 01, 2007 | Pinnacle Studio MovieBox USB Video Capture

Not finding what you are looking for?
Pinnacle Studio MovieBox Plus - Video input adapter - Hi-Speed USB - NTSC, SECAM, PAL  Logo

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pinnacle Televison & Video Experts

David
David

Level 3 Expert

781 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

313 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Pinnacle Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...