Question about Microwave Ovens

1 Answer

Lights went out inside and underneath microwave. replaced the ones underneath and now the ones inside dont work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Microwave Ovens Master
  • 9,098 Answers

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with a one year guarantee.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan, cooling fan, turntable, and/or inside light operation, too.

Details of our service are at our Web site, along with a video showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly with your brand, full model number and symptoms.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If water blew up in microwave will it damage the microwave


if the display and the lights are out after the water/steam explosion then yes id say it did have an adverse effect to the operation of the machine , there are no user servicable parts inside a microwave so dont open the case your self , these little boxes contain enough power to light a house up ,even with it unplugged from mains power

Jan 10, 2015 | Rival MT660 Microwave Oven

1 Answer

I went to change a light bulb, light bulb pulled out of threads. Tried to remove threads and without turning power off and shorted something out. Underneath lights and fan will not work. The microwave...


I would say you have blown a fuse on the unit. As you now have found out, that's one of the reasons why you unplug any electrical equipment before working on them. You will have to take the outer cover off the microwave and locate where the fuse is. It is most likely on the back of the main PCB or possibly inside a plastic sleeve or mounting near where the cord enters the unit.

Feb 22, 2014 | GE JVM1440 Microwave Oven

1 Answer

Ge profile spacemaker xl 1800. recently changed a


It sounds like the main transformer has failed. It would be cheaper to replace the whole microwave than repair this one. Sorry to be the bearer of bad news. Hope this helps. Good luck.

Mar 06, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

My whirlpool mh3185xps went completely dead. No


sorry but yes its time to replace it,
oh,, by the way,,,
your very lucky to still be alive right now!!!
tinkering inside of a microwave could kill you,,,
inside of your microwave is a very big capacitor it works just like a police stun gun works,,,however it dont just stun you,,,it kills you! witch would realy spoil your day, be warned, many a fool has took a free flying losson from one of them but servived just!

Jan 09, 2010 | Whirlpool MH3185XPS Microwave Oven

1 Answer

Light went out


Look inside. Any access panel?

Remove the cover to find the lamp. dont touch the silver can. unplug the machine before you open the case.

Oct 05, 2009 | Emerson MW8987B/W Microwave Oven

1 Answer

Short circuited Whirlpool MH1150XM while changing the bulb underneath. Need help to fix it, thanks :)


We replaced the board behind the control panel. $130.00. If you do this make sure you can put the wires back the right way. My husband finally got it and our micro is working like brand newThanks to all who tried to help.

Sep 29, 2008 | Whirlpool MH1150XM Convection/Microwave...

2 Answers

Hood lights


first remove mains cord from main power. and remove the microwave oven top cover and check the bulb and crefully remove the old bulb and put new bulb. at high voltagae section dont touch any thing ,that area very dangerous ,thats why very carefully work inside the microwave oven ..

Sep 09, 2007 | Goldstar MV-1320W/B Microwave Oven

1 Answer

Burning smell and light switch does not work


The controller needs to be repaired. We regularly repair these control board assemblies for only $32.50 nationwide, and that's much cheaper than replacing the board. For safety, disassembly and other info see http://tinyurl.com/yzjozk

Jan 14, 2007 | Whirlpool MH7135XE Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...