Monitor mitsubishi diamondcrysta rdt 177lm - Computers & Internet

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

You're probably right. It's just a low end store brand.

Product manual does not have troubleshoot section.
The operation might be normal, and within expected parameters, or it might have a glitch.
Suggest you contact Kohler Power directly:
http://kohlerpower.com/contactus/contactus.htm?sectionNumber=

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Disconnect the control wires and see if it still does it

After a google search i found these drivers, http://www.nodevice.com/driver/company/Mitsubishi/page2.html
Hope it helps

Steven Cumming
Please leave positive feedback :-)

only way to get one is to call them at 1-800-825-8220. Give them model and serial numbers. There is nothing on line on their site.

http://www.kohlerpower.com/onlinecatalog/salesservicelocator.htm

replace thermostat

sounds like the voltage sensor is either mis adjusted or burnt up. Also could be a wire disconnected on the voltage sensor board.

http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=HOME-LENOVO#rdt

select noteboks>select all your system info>select os