Question about Sunbeam 722 Heater

1 Answer

I bought a Sunbeam Heating Pad (Ultraheat) last year which I just took it out of the box last night. It is brand new, not used until last night and it smell like it was burning. I instantly unplugged it. It says it has a 5 Year warranty. What do I do? I was not pleased. These things cost money and I have Crohn's disease and when I need it i need it badly.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 1,772 Answers

Sorry to read about your problem, I hope this helps you out.

i think from sitting in the box for a year, the material can smell, form its first time usage.
I suggest you put the pad on or in a baking dish on the stove..plug in and see if the smell burns off. I think it will.

if not return to Sunbeam (800) 435-1250


I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good luck

4 Thumbs - Very Helpful
3 Thumbs - Helpful



Posted on Dec 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sunbeam Heating Pad


You can try to order a replacement through the company you originally bought the set from. If it is fairly new, the warranty may still be in effect. My sister goes through http://www.pioneercomfort.com and has had good results, you could try there.

Jan 17, 2014 | Sunbeam Heating & Cooling

1 Answer

Sunbeam heating pad flashing F


Unfortunately I bought this heating pad three months ago and it too has an F in the display which I think means 'failure' but I do not know why. Also this is brand new and has worked fine for three months. Now what?
Does anyone out there have a comment to help me and this original person asking this question?

Jan 04, 2014 | Sunbeam Xpress Heat Heating Pad 2013-912

2 Answers

Sunbeam heating pad no longer heats. The red


I had same issue w/ red blinking light on my Sunbeam controller SW114, pad CAT93. Was about to toss away but then got it to work perfectly by doing this:1. With unit UNplugged, press & hold the single grey controller button2. While pressing the controller button, plug the unit inUnit will power up in the 'warm' (green light) setting; pressing the controller button will cycle you thru the others modes.

Jan 12, 2010 | Kitchen Appliances - Others

1 Answer

My control mechanism has error message F1 now F2 and will not get hot what is wrong


My electric blanket had the same message and I could not find anywhere to answer question. Sunbeam said to look on th cord tag and this was no help. I finally pulled out the main wire box inside blanket and took apart to see if there was anything obvious. All solders looked fine but then I noticed a drop of water. Used a hair dryer to dry the electronic board, reassembled and it worked. Must have been a water short.

Sep 10, 2009 | Sunbeam 722 Auto Shut-Off Heating Pad...

1 Answer

Humidifier not producing enough vapour


have you looked to getting a whole house humidifier. This elinates the need to constanly put water in a can. And they are relatively maintenance free.

Feb 08, 2009 | Sunbeam 701 Humidifier

15 Answers

New heating pad not working


have same problem with heating pad . reset control by unplugging unit for 1 minute , while holding down power button plugged unit back in . sometimes this takes 3 or 4 tries.

Apr 26, 2008 | Sunbeam 805810 HeatSense Heating Pad...

4 Answers

Malfunction heating pad


Same F2, quick off problem here. Then I noticed that the gray plug on the power cord was not completely flush with the connector on the pad. I shoved them together until there is no gap. The unit's worked perfectly since then.

Mar 24, 2008 | Sunbeam 805810 HeatSense Heating Pad...

8 Answers

Sunbeam Heating pad will not reset


I have a Sunbeam heating pad with the SW204 controller that the High light blinks when it is plugged in. I called Sunbeam and the first thing they said is it cannot be plugged into a surge protector. Next, to reset it unplug it from the wall, then unplug the controller from the heating pad. Wait 30 seconds, then plug the controller back into the heating pad and then into the wall. It did the trick. However, when I move it to the bedroom plug it does the same blinking. Sunbeam is sending me a replacement heating pad. They appear to be very good with Customer Service since it is more than a year old.

Mar 21, 2008 | Heating & Cooling

1 Answer

Heating pad


There are no repairs done on Sunbeam heating pads. If it is less than a year old either take it back where you purchased it or contact Sunbeam.

Feb 23, 2008 | Heating & Cooling

Not finding what you are looking for?
Sunbeam 722 Heater Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Heating & Cooling Experts

Paul Carew

Level 3 Expert

2557 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Jay Finke
Jay Finke

Level 3 Expert

1358 Answers

Are you a Sunbeam Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...