Question about Pioneer Audio Players & Recorders

1 Answer

Pioneer SX 300 low volume on both channels, checking some of the DC voltages they appear OK. This is the same even when aux input is used eg. with a cassette deck.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 144 Answers

Which speakers do you have connected?
if your speakers are too "heavy" in terms of Ohm, this is the cause.

Posted on Jul 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer elite sx-a6 keeps going to standby


I had a receiver that would shut off when I had the volume too loud. It was caused because the speakers were using too much juice. Does it work with less speakers or at low low volumes? Then this may be the case.

I solved it by getting a different receiver.

if it has nothing to do with volume then check your manual and settings for a auto standby feature that may be just putting the receiver to standby after a set time.

Apr 14, 2014 | Pioneer ELite SX-A9 HI-FI Audio Receiver...

1 Answer

I have connected Pioneer PL-990 turntable to SX-255R receiver through PHONO but get static and distortion through speakers. Manual says to connect to AUX not PHONO but cannot see AUX on receiver. Any...


You need to hook it up to another analog input other than the phono input. The record player has a built in preamp, and the receiver's phono input has a separate preamp for non-amplified players. You cannot have the two hooked to each other.

Jan 28, 2013 | Pioneer SX-255R Receiver

1 Answer

Have changed headunit and also speakers..but still got my problem..plays ok till i up the volume then the headunit reboots by itself ... help please


Check the DC voltage at the Yellow and red wire to see whether it falls down when you raise the volume. If you have no meter to check, then buy a battery tester from auto parts shop. If the voltage falls down with volume, check the fuse or contacts in the fuse box.

Feb 27, 2012 | JVC KD BT11 CD MP3 CAR RADIO IPOD AUX...

3 Answers

Aux in runs only back speakers and no volume control


This also happened to me, I just replaced the cable and works fine now.

May 27, 2009 | Pioneer DEH-P3000 CD Player

1 Answer

Aux in runs only back speakers and no volume control


check sub setting some radios can select between non fading sub output or aux input

May 08, 2009 | Pioneer DEH-P3000 CD Player

2 Answers

Constant Buzz coming from SX-255r


Power source harmonics. Or its power supply regulation. Check also if input line is touching something.

Apr 03, 2009 | Pioneer SX-255R Receiver

1 Answer

Pioneer SX-950


use a cable tester for the wires that are connecting to the unit and you'll find the faulty wire that is bad.....good luck

Nov 03, 2008 | Pioneer AVIC-S1 GPS Receiver

1 Answer

Low volume from Akai turntable attached to Pioneer Surround Sound Receiver


If you receiver doesn't have phono inputs,you will need to buy an inline phono amplifier.Phono inputs have a built in amplifier,all others don't.Try Crutchfield.com.If they don't carry them,they will tell you who does.

Mar 02, 2008 | Audio Players & Recorders

2 Answers

Pioneer turntable Pl-560 and Pioneer Receiver VSX-D409


No phono inputs?? You will need a phono to line level preamp to use aux input.

Nov 03, 2007 | Audio Players & Recorders

2 Answers

Pioneer vsx d512


All you have to do is connect the coaxial out from pc to any audio i/p at the back of vsx d512.but ensure you select the right channel to play the audio ( eg. tape i/p select tape at front control, aux i/p select the aux at front control )

Aug 03, 2007 | Pioneer VSX-D511 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

John
John

Level 2 Expert

473 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...