Question about Panasonic GigaRange KX-TG5432 Cordless Phone

Open Question

ANSWERING MACHINE PANASONIC KX-TG5432 NOT RECORDING MESSAGES. ANY RESET BUTTONS ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cnavarro
  • 2460 Answers

SOURCE: Digital panasonic kx-t7633

The 7633 has a FWD/DND button. Is it blinking, lit solid or dark? It's designed to be pressed 3 times for FWD DND or OFF....It's programmed as follows, assuming that 500 is your voice mail access code:

From the intercom dial *7101. That sets DND. Dial 710x 500 # to set call forwarding where x-2 for all calls 3 for BUSY for for NO ANS 5 for BSY/NA. 7&8 are FOLOW ME commands and they have a different set of instructions ie Dial *7107 plus your extension to have calls come to the phone you're at and *7108 plus your extension to cancel it. I have never seen it used. *7100 cancels all forward and DND arrangements from your phone..

This is just hte command set for ALL CALLS. You can also set up forwarding for Outside Calls and Inside calls seperately and you can program buttons to do the forwarding.

Your Panasonic dealer has 2 manuals that you would find interesting, one is the TDA Operating Manual and the PTPM Manual. The operating manual has a complete set of programming instructions for the manager and users of TDA systems, the PTPM has a complete set of programming features that can be performed from a Panasonic 76XX display phone.

THe pdf's aren't huge and they can be sent to your email address if you provide one under the Ask Me button.

Carl




Posted on Oct 01, 2008

rockitman187
  • 2559 Answers

SOURCE: How do I retrieve messages on the Panasonic KX-T7030 phone?

  • Call into your mailbox (usually by dialing intercom 165)
  • Press 4, and 4 again (for "Incomplete call handling")
    By default, three options are enabled:
    option #1: leave a message
    options #5: call the operator
    option #6: return to top menu
  • Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

  • Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.
  • Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail
  • Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.
  • Use Absent Messages to show text messages on other people's phones when you are away.
  • Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.
  • Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.
  • Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.
  • If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).
  • Dial 330 to make an announcement to all phones.
  • If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM
  • Posted on Feb 12, 2009

    • 3 Answers

    SOURCE: how to use call waiting

    The flash button is the black button to the left of the Menu button, when you are on a call, or the talk button has been pushed to use the handset. It doesn't show when the phone is in standby, but when it is on, it should say Flash in the LCD screen and have an arrow pointing to the button.

    Posted on May 18, 2009

    • 1 Answer

    SOURCE: Panasonic kx-tga101cs incorrect voicemail message

    Press and hold "Clear" until it beeps. It will clear the invalid voice mail msg.

    Posted on Jul 28, 2009

    cnavarro
    • 2460 Answers

    SOURCE: How do I record or change a recorded message on

    A Panasonic 7730 phone operates on 18 different Panasonic Key Systems. There are 5 or so different ways to record a message...which one is yours?

    The 7730 was first delivered with the TA-824 system. It has the ability for announcements via DISA, which was built in to the USA versions of the TA. It's recorded or changed via the master phone and PROGRAM 911.

    A Panasonic TVA or TVS voice mail system does auto attendant functions. It can have both company greetings and custom service messages. Those are changed via mailbox 998, the message manager's box.

    Last, the newer system also have "bulit-in" voice mail boxes. Those greetings are recorded by 722xx commands.

    Carl

    Posted on Dec 13, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Record message on Pansonic kxtg4021 cordless phone answer machine


    With the phone in standby, press Menu on one handset. Use the Up/Down arrows to navigate to Answering Device. Press OK. Navigate to Greeting and press OK. Select Record Greeting and press OK. Highlight Yes using the Up/Down arrows and press OK. After you hear the beep, hold the handset about 8" (20 cm) away and speak your message. Press OK when you have finished the message. (The recording will end after 2 minutes.) Press Off to exit the menu system.

    The answering system may need to be on for this option to be available. You can turn it on by pressing the Answer On button on the base. Alternatively, press Menu and navigate to Answering Device. Press OK and select Answer On. Press OK. Press Off to exit the menu.

    The manual for the KX-TG4021 is available from Panasonic on the product site: http://shop.panasonic.com/support-only/KX-TG4021N.html . The direct link to the manual is ftp://ftp.panasonic.com/telephone/om/kx-tg4011_mul_om.pdf . See page 28.

    I hope this helps.

    Cindy Wells

    Jul 09, 2016 | Lands Phones

    1 Answer

    HOW DO I CHANGE ANSWERING MACHINE MESSAGEV ON PANASONIC KX-TGA642C PHONE


    The KX-TGA642C is a handset for the KX-TG6421 series phone system. (These are sold as the KX-TG6422 or KX-TG6424, depending on the number of handsets in the initial package.) To record a greeting message, make sure that the phone (all handsets) is in standby. Then press Menu on a handset. Press # 3 0 2 (or use the Up/Down arrow keys to navigate to Ans Device > Greeting > Record Message. Press Select to each menu/sub-menu section.) Highlight Yes and press Select. After you hear the beep, speak your message clearly. Press Stop to end the recording. (The maximum greeting length is 2 minutes.) Press Off to exit the Menu system. If the answering system is on, this message should play.

    The manual for the KX-TG6422 has the full directions to change the answering machine message. The direct link to the manual is https://panasonic.ca/PCS/OperatingInstructions/KXTG6411-12-13-14-OI-Eng.pdf . See page 33 for the directions.

    I hope this helps.

    Cindy Wells

    Jul 03, 2016 | Panasonic Lands Phones

    1 Answer

    How do I reset recording with my own message


    The KX-TGA641 is the handset. You need to refer to the documentation for whatever answering machine you have connected to your phone line. Failing that, repost your question identifying the answering machine.

    Feb 18, 2013 | Panasonic KX TGA641 Cordless Phone

    1 Answer

    How to reset my recording on the answering machine KX TGA641


    The KX-TGA641 is the handset. You need to refer to the documentation for whatever answering machine you have connected to your phone line. Failing that, please repost your question identifying the answering machine.

    Feb 18, 2013 | Panasonic KX TGA641 Cordless Phone

    1 Answer

    Forgot how to record outgoing message on KX-TGA


    KX-TGA 101S is the model number of the hand-set. Can you send me the model number of the answering machine? Also do you have the manual for both hand-set and answering machine? If not I can give you the link to download both manuals for free.

    Master FixYa...saailer@att.net

    Dec 06, 2009 | Panasonic KX-TGA101S Cordless Handset

    1 Answer

    Is panasonic KXTG5432 an analog or digital phone?


    It doesn't matter. The recorder is on the landline side of the system. If you are being harrassed via telephone contact your provider. It is an offence in most countries in the world. They will help you resolve it a lot quicker and can block the calls from that caller.

    Oct 24, 2009 | Panasonic GigaRange KX-TG5432 Cordless...

    1 Answer

    Panasonic kx-tg2740 cordless phone - how to change message?


    • Step 1Begin the recording process by first locating the "Change" button on your answering machine. This button initializes the answering machine for adjustments to the settings of the various features.
    • Step 2:Locate the microphone on your answering machine and lean towards it until you are about nine inches away.
    • Step 3:Locate the "Annc" button. Press and hold the "Annc" button until it beeps. Begin recording your message.
    • Step 4:Watch the message window while you are recording your message. It keeps track of how much time has elapsed since you began recording. You can record a message that is up to three minutes long.
    • Step 5:Locate the "Stop" button and press it when you have finished recording your message. The answering machine will play your message back at this point. If you are not satisfied with your message, repeat the steps to record it again.
    • Step 6:Press "Annc" if you want to listen to your message again.
    i found this i hope it helps

    Jan 10, 2009 | Panasonic KX-TG2740 Cordless Phone

    1 Answer

    The pre recorded message on the answering machine has been lost.


    I read thru the manual. There is nothing bout recovery of factory messages. If you recorded your own, try deleting it. Or unplug the base from power and try a reset. This is from the manual. At the end, I gave you a link to the manual!

    Using a pre-recorded greeting
    message
    If you erase or do not record your own
    greeting message, the unit plays a prerecorded
    greeting message for callers
    and asks them to leave messages. If the
    message recording time (page 39) is set
    to “Greeting only”, caller messages
    are not recorded and the unit plays a
    different pre-recorded greeting message
    asking callers to call again.


    http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

    Nov 21, 2008 | Panasonic KX-TG9331T Cordless Phone

    2 Answers

    Putting my own message on this panasonic phone KX-TGA109EX


    press the message button in the top left corner, then the tape should start flashing on the screen, then press number 9 (should have a talking man with a solid circle to the left of him) then record your message, press 5 to stop and 7 to listen to the message

    Sep 10, 2008 | V Communications 7500 Answering Machine

    Not finding what you are looking for?
    Panasonic GigaRange KX-TG5432 Cordless Phone Logo

    Related Topics:

    33 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    john milligan

    Level 3 Expert

    512 Answers

    george  peters
    george peters

    Level 3 Expert

    860 Answers

    Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...