Question about Yamaha RX-V800 Receiver

1 Answer

I have a Yamaha RX V800 AV Receiver is their an lip sync adjustment for internally with this amp.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,546 Answers

This monster has a lot of built-in opportunities to tune or mis-tune the sound but nothing to deal with the effect you're addressing.

A discussion of lip sync:

http://en.wikipedia.org/wiki/Audio_to_video_synchronization

  • There is extensive use of audio and video signal processing circuitry with significant delays in television systems. Particular video signal processing circuitry which is widely used and contributes significant video delays include frame synchronizers, digital video effects processors, video noise reduction, format converters and MPEG pre-preprocessing.
  • The video monitor processing circuit may delay the video stream. Pixelated displays require video format conversion and deinterlace processing which can add one or more frames of video delay.
  • A video monitor with built-in speakers or line-out may not delay sound and video paths by the same amount of milliseconds. Some video monitors contain internal user-adjustable audio delays to aid in correction of errors.
  • Posted on Dec 31, 2010

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
    click here to download the app (for users in the US for now) and get all the help you need.
    Goodluck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Yamaha RX-V800 shuts down when any control button is pressed


    What if you DON'T use the remote? Does it shut down when just using it?

    If SO, you have a bigger problem.

    If NOT, it sounds like the remote is hosed - sending a code to shut off.

    Do you have another remote of any brand that you could set to do something simple, like change volume? Don't train it from the original, though, or it would do the same thing.

    Feb 13, 2010 | Yamaha RX-V800 Receiver

    1 Answer

    Yamaha RX-v800 av receiver will not power up. Was playing and just shut off & will not powere up again. Was in a stereo/tv cabinet with closed glass doors. Cabinet compartment has vent holes in back....


    Mine did the same thing two days ago. No reason to suspect overheat as mine is in the open. Could be the power supply? Mine comes on after sitting for a while.

    Nov 18, 2009 | Yamaha RX-V800 Receiver

    1 Answer

    No picture from wii


    The RX-V800 switches the various video signal types separately.
    Since you are feeding S-Video to the TV the composite (yellow) input from your Wii is not going anywhere.
    If you cant get S-Video output from the Wii then I'd suggest a simple Composite to S-video adaptor plug ($5 say). It worked for me with a Game Cube.
    Cheers
    BJ

    Mar 19, 2009 | Yamaha RX-V800 Receiver

    3 Answers

    Need yamaha codes to program into uverse tv ir remote


    (I have the RX-V659). Because the Yamaha remote has TWO SEPARATE buttons - power ON and power OFF (standby). This problem can't be fixed. There's a code to choose power ON and another code for power OFF. But one button can't be two buttons. Bad engineering\ design by Yamaha in my opinion

    Jan 09, 2009 | Yamaha RX-V800 Receiver

    1 Answer

    Has gone into proctective mode


    Audio amplifiers IC´s damaged you need to replace him

    Oct 16, 2008 | Yamaha RX-V800 Receiver

    1 Answer

    Yamaha RX-V800 Composite Video Signal Problem


    Hey there fontdude, I will begin assuming you are running your a/v cable into your receiver and then out to the TV or Monitor. If this is the case, I suggest you run the video cable direct from DVD or VCR device to Tv/monitor. You can still run the audio through your receiver. The nature of your problem was probably related to video signal strength being weakened as it ran through your receiver. Good Luck! Let me know how it works for you.

    Feb 09, 2008 | Yamaha RX-V800 Receiver

    1 Answer

    Problem in yamaha rx v800


    Hello!!! Are you electronic technician? You should see the transistors Q22A, Q22C, Q19C e Q19A and its drivers on Main Board. All the best, Rasgador

    Aug 03, 2007 | Yamaha RX-V800 Receiver

    Not finding what you are looking for?
    Yamaha RX-V800 Receiver Logo

    235 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Yamaha Audio Players & Recorders Experts

     Grubhead
    Grubhead

    Level 3 Expert

    5190 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    The Knight
    The Knight

    Level 3 Expert

    74459 Answers

    Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...