Question about Computer Speakers

2 Answers

Please help me solve this problem

Write <,> or = the blanks to make the sentences true:

1. 0.114______0.2202______0.2212
2. 7.787______7.877_______7.8870
3. 0.1090_____0.1009______0.109
4. 12.12______1.212_______1.222
5. 0.4364_______04.364______0.4264

B. ARRANGE THE FOLLOWING DECIMAL FROM LEAST TO GREATEST
1. 10.1,10.001,10.01,10.101
2. 0.047,0.4072,0.47,0.4710
3. 7.7779,7.077,7.977,7.3099

C. ARRANGE GREATEST TO LEAST
1. 31.467,31.43,31.468,31.466
2. 7.017,7.017,7.018,7.0191

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1. 2, 3 , 1 ,

Posted on Jul 20, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Computer Spe... Master
  • 1,314 Answers

1. < <
2. < <
3. > <
4. > <
5. < >

1. 10.001, 10.01, 10.1, 10.101
2. 0.047, .4072, 0.47, 0.4710
3. 7.077, 7.3099, 7.7779, 7.977

1. 31.468, 31.467, 31.466, 31.430
2. 7.0191, 7.018, 7.017, 7.017

Thanks and please take a moment to rate as fixya.

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get apps on my cruz reader


http://www.supertooth.net/EN/HD/#page=page-5

With my HTC phone, when I say the key sentence to call one of my favourite contacts (for example, call first contact), my SuperTooth HD says "not in phonebook":

  • With my HTC phone, when I say the key sentence to call one of my favourite contacts (for example, call first contact), my SuperTooth HD says "not in phonebook": You must create your favourite contacts in the phonebook of the SIM card, not in the phonebook of your HTC phone. Once you have created your favourite contacts in the phonebook of the SIM card, please refresh the phonebook of your SuperTooth HD or do the pairing again as indicated below.

Jan 28, 2013 | Velocity Micro Cruz Reader Special Edition...

1 Answer

Speaker level really low


you have to make sure you increased the volume on the computer itself.go to the control panel and click on sound,speech and audio devices.change the volume settings and speaker settings.this should bring about the desired result.

Jul 01, 2010 | Creative Labs Inspire 6600 Computer...

2 Answers

I lost my drivers cd of P1945GCM


You can download it from
_http://www.bioticaindia.com/p1945gcm.html

Sep 23, 2009 | Computer Speakers

1 Answer

No sound after installing the x-530 speakers


To install the driver you use the installation disk that came with the speakers. If you do not have this disk you can go to the Logitech website under the support section, look up your product and download the software/drivers. Hope this helps & please remember to rate my answer. Thanks.

Dec 27, 2008 | Logitech X-530 Computer Speakers

3 Answers

Can I have my Logitech X540 Speaker system thru my tv


HERE is a link to the Z-540 manual. It should help. Connect the green plug from the audio input cable to the "line out" jack on your TV. Do NOT use the black or orange plugs. WIth a 2 channel card like your TV's you will not get sound from the rear speakers unless you enable matrix mode through the remote.

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

May 06, 2008 | Logitech X-540 Computer Speakers

1 Answer

Computer and Speakers


HERE is a link to the Z-540 manual. It should help. Connect the green plug from the audio input cable to the "line out" jack on your TV. Do NOT use the black or orange plugs. WIth a 2 channel card like your TV's you will not get sound from the rear speakers unless you enable matrix mode through the remote.

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

May 05, 2008 | Logitech X-540 Multimedia Surround Sound...

1 Answer

HELP ME!!! LOGITECH Z-5500


Unplug the speakers from the mains and computer. Wait for 5-10mins, replug to mains and computer.

If this does not work, try reseating the audio card (while the PC is switched off and the speakers unplugged, or try using a different slot.

If neither works, it could be that your system is defective. Please see HERE about an RMA. Or you can eMail Logitech support at http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/ask.php?

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. -You can rate this solution with one of four votes (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

May 04, 2008 | Logitech Z-5500 Computer Speakers

5 Answers

Can't get my durabrand uc-280 computer spreakers to work


Returned the durabrand uc-280 to Walmart! Plugged the existing speaker into the correct hole in my new sound card. Problem solved!

Feb 16, 2008 | Computer Speakers

1 Answer

Acer Aspire keyboard


I puzzled over this for months, and then discovered it was because my thumb, normally attached to a mouse, was touching the board. Easy smeazy. Either wait until your habits can change, and not touch the touchpat with your thumb, or get a plug-in mouse.

Nov 10, 2007 | Computer Speakers

Not finding what you are looking for?
Computer Speakers Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...