Question about Ovens

1 Answer

Bosch oven not heating to temp

Hi,

Bosch model HBN 222 BAU oven not heating to correct temp.
top element works in grill mode.
When oven switched to bake (either fan forced or convection), top element
doesn't feel hot, can feel bottom element working and fan is working ok.

Posted by on

  • 10 more comments 
  • ginny grieco
    ginny grieco Feb 22, 2014

    this did not help me at all

  • Anonymous Mar 12, 2014

    grill top oven element

  • Anonymous Mar 15, 2014

    Which part # fan forced oven element would fit a Baumatic BA2850 dual cooking theatre?

  • Anonymous Mar 16, 2014

    belling b170 g top oven switch faulty when grill is slected the fan does not come on and th grill does not heat up

  • Anonymous Mar 17, 2014

    My Neff Mega 4569 oven has stopped getting above about 80 degrees. The bottom & top grills are working, the fan is working, as is the light but the oven will not get hot - please help!!

  • Anonymous Mar 17, 2014

    I can't get the grill to operate. The top oven works ok

  • Anonymous Mar 18, 2014

    element gets real hot even on low temp,cant control temperturein oven

  • Anonymous Mar 19, 2014

    fan force is not working nor is the back element

  • Anonymous Mar 22, 2014

    We have an electric & gas Baumatic range oven. The smaller electric oven works fine. The larger oven does not. Neither the top nor the bottom element will heat up and the rear fan does not spin. The internal extraction fan, presumably on a different circuit, does work,

  • Anonymous Mar 29, 2014

    bottom oven not getting hot but the grill works ok replaced the element

  • Anonymous Mar 31, 2014

    i have a lamona oven but no user guide so i dont know what the settings means.when i put the oven on with the sign which looks like a straight line top and bottom with a fan in the middle,the grill comes on aswell.is this right

  • Anonymous Mar 31, 2014

    hi on hot air setting oven does not get to required temp stays cool works on grill and upper/lower heater setting

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 190 Answers

Dear customer,
i recommend u to try the following routine to sort out this problem

  • Check timer and clock settings
  • Reseat the element
  • Test the element
  • Test the element connectors
  • Test the oven temperature control
  • Test the oven selector control
  • Recalibrate the temperature control

  • hope u find this useful. thank you.

    Posted on Jul 09, 2008

    • Ajith Kumar Jul 10, 2008

      Please Rate the Solution.. Thank You..

    ×

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    Tip

    Common heating faults with Bosch HBN 560570B / 560550B single oven


    For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Bosch fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
    To gain access to the BOSCH element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
    2, If your BOSCH fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
    3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BOSCH oven thermostat
    4, A quite common and easily overlooked answer is if your BOSCH oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

    on Jan 19, 2010 | Bosch HBN 560570B / 560550B Electric...

    Tip

    Common heating faults with Bosch HBN 430560B / 430520B single oven


    For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Bosch fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
    To gain access to the BOSCH element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
    2, If your BOSCH fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
    3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BOSCH oven thermostat
    4, A quite common and easily overlooked answer is if your BOSCH oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

    on Jan 19, 2010 | Bosch HBN 430560B / 430520B Single Oven

    1 Answer

    I have a Bosch HBN7053GB /05 oven which worked fine apart from the bottom oven does not heat up, the light and fan are both working just no heat. I have replaced the element but still no heat, so now im...


    You changed the element does everything else work fine, stovetop elements,broiler etc.if so check your wiring going to the new element and to the switch if they are fine it may just be the temp/control switch

    Mar 12, 2011 | Bosch HBN 7052 GB Stainless Steel Electric...

    1 Answer

    My bosch oven grill element is not working and my oven does not seem to be getting as hot as it should. any ideas what it could be.


    More than likely the grill element has failed, and this could account for the oven not getting hot enough, as on some makes, the grill element is on at the same time as the oven element, so if the element has failed, then it will not be hot enough.
    My advice would be fit a new grill element, and this hopefully will solve the problem of the oven not being hot enough.
    Please rate my solution.
    Thankyou.

    Jan 25, 2010 | Bosch HBN 430560B / 430520B Single Oven

    1 Answer

    Can I change the grill element myself? I assumed it just plugged in at the rear and have removed the two screws holding element to top of oven. Now I wonder if the steel plate at the back is itself bolted...


    The grill element is not usually a 'plug-in' device.

    You will have to remove the back of the oven/grill and disconnect it from the back before you can withdraw it from the front.

    Remember to switch off the power before removing the back.

    Jan 12, 2010 | Bosch HBN 131560B / 131520 hot-air...

    1 Answer

    I have A Bosch HBN32 oven which has just stopped working all the timers are switched off and the grill still works but the oven only heats up to about 80c the fan still works. any help would be greatly...


    ck wiring ( tec sheet inside the panel - there on most bosch a one time thermo / or it may be a resetable one .but you will have to reset it by pushing the red button . this may correct problem . if it does it again look for a over heating porblem like the ( fan foing too slow. ) or temps prob problems. .. mm / hope this helps / feed back pls /

    Dec 20, 2009 | Bosch HBN 3550 Electric Single Oven

    1 Answer

    Not heating in fan forced mode


    Possibly your fan element has blown. Try and take the cover off that coves the fan inside the oven itself and use a torch to look at the element to see if it looks out of shape etc.

    Jun 15, 2009 | Fisher and Paykel OS302SS, Stainless Steel...

    1 Answer

    MAIN OVEN DOESNT WORK


    Hi
    Pretty certain nofuse. Suspect switch. Guess would be as element blew it took out contacts on oven switch

    Feb 20, 2009 | Bosch HBN 7052 GB Stainless Steel Electric...

    1 Answer

    Bosch hbn s gb


    oven element would need model and ENR No. to supply

    Sep 16, 2008 | Bosch HBN 9163 GB / 9163 GB hot-air Double...

    Not finding what you are looking for?
    Ovens Logo

    Related Topics:

    1,126 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ovens Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    yadayada
    yadayada

    Level 3 Expert

    63661 Answers

    Are you an Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...