Question about HP Office Equipment & Supplies
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi, you will have to stop sharing your printer, if you have the administrator rights to do this you will have to go to the printer properties click on sharing and click do not share and save.
that should stop them from using your printer
Posted on Jan 27, 2009
SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.
Make sure that the product is turned off.
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.
for more information please go to below link>>
Thanks for using FixYa.
Posted on Feb 03, 2009
SOURCE: I am working with a
Well, I don't have a document in that format exactly to play with, but assuming you are using the PCL 5c driver, it should be a fairly simple task. If your using another driver (ie: RPCS) then it will be similar, just a little different looking dialog box.
Open your document, Select "Print", select "properties", you can change the "orientation", and "layout" (pages per sheet), 'duplex', and staple (assuming you have a booklet finisher installed and configured in your printer properties). There is an icon in the left corner that changes with the settings and should help you with the them. Obviously, you should only print 1 set, or even just a page or 2 to check the output. These types of things are always a bit of trial and error until you have done it a couple times. I hope this helps
Posted on Mar 07, 2009
SOURCE: prints photos with yellow horizontal stripes.Hv downloaded HP printing diagnostic utility and no errors were reported. If just using scanner to copy photos, prints fine but copying photos in library p
go into the printer and do a test print. start>printer & faxes>right click on the printer in question>properties>printer preference button> test print ... try the printer's own test print. This is usually caused by a poor print head, low ink, poor cartridge or the need for calibration. Look in the maintenance tab in the printer properties for head cleaner, jet cleaner etc. This also happens with refill ink cartridges.
Posted on Apr 29, 2009
Tips for a great answer:
Aug 05, 2008 | Televison & Video
Feb 02, 2011 | Microsoft Windows XP Professional for PC
Jun 18, 2009 | HP Office Equipment & Supplies
Apr 07, 2009 | Microsoft Office Publisher 2003 for PC
Feb 10, 2009 | Microsoft Office Publisher 2007 for PC
Dec 28, 2007 | Microsoft Office Professional 2007 Full...
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: