Question about ICOM Informatique IC-F121 VHF 136-174MHz mobile 128Ch 50W Microphone

2 Answers

Dears, we have CS-f100 software Ver. 1.6, but during programing VHF radio ICOM IC-F111, message appears "Please update to the latest version" Can you send to me the updated version of this Radio. Thanks. Ahmed.

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

IC-F111 is an "European" version for our IC-F121 radio. The most latest version for CS-F100 is 1.7.

pls asked Ahmed el derby for more info.

Posted on Jan 04, 2011

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You can download the latest version rev 1.7 from here:http://www.two-way-radio-tools.com/icom-softwares.html

I hope this help
Hp

Posted on Jan 30, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Icom F1721 w/ cs-f70/1720 software - can read the f1721's information (win7 with USB to serial com link), but can't read/write programming.


This is a commercial radio and often, the programming for the is not as easy as with an Amateur radio. I haven't worked on this radio specifically, but I do remember with the commercial radios that I repaired that often there was a jumper that had to be removed or installed to be able to program them. This prevented the customer from getting into the programming and screwing things up, plus it is ******* for them to do this unless they are licensed to work on commercial radios. My guess is you have to find out if this is in fact the case. A good place to look for radio manuals is www.mods.dk.

Sep 26, 2016 | Icom IC-F1721D P25 VHF Mobile Radio, 256...

1 Answer

When using the OPC617 external cable, what solder pads need jumpered for PTT and mic audio?


To use OPC-617 option cable:1- open your CS-F100 Rev 1.7, read your radio.2- click on Common >> Expert >>EPTT/FTSW change to EPTT, 3- On the main board , look into the left side of the board you see pad D, solder ittogether, if you use pad F, you shou.ld put a 47K ohm resistor.You can follow this link for your pin out connection.http://www.two-way-radio-tools.com/icom-mc1700-mdc.html
and download ver sion Rev 1.7 from herehttp://www.two-way-radio-tools.com/icom-softwares.html
HP

Jun 04, 2010 | ICOM Informatique IC-F121 VHF 136-174MHz...

1 Answer

How do I reset the F221 to factory settings. I cloned the unit with V1.6 of the programming software with updates that included turning on the user start password and now the box will not communicate with...


F121 VHF, F221 UHF they both use the latest Version 1.7.
For F121 Factory default as follows:Open your CS-F100 software, enter RX TX frequency below, and write to the radio.Ch1: 136.100 MHzCh2: 155.100 MHzCh3: 173.900 MHz
For F221 Enter RX TX frequency belowCh1: 440.000MHzCh2: 460.000MHzCh3: 489.000MHz, then write to your radio
Or you check from this site:http://www.two-way-radio-tools.com/icom.html
HP

Feb 04, 2010 | ICOM Informatique IC-F121 VHF 136-174MHz...

2 Answers

I need the IC-F11/S to talk to my CP100 (vhf) model


Programming the CP100:
http://www.thekidshuttle.com/ABC%20Docs/CP100_Manual.pdf

Programming the IC-F11:
I believe one must purchase software and a programming cable to program the frequencies of this radio.

Mar 13, 2009 | ICOM Informatique Icom IC-F11 5W 16ch VHF...

2 Answers

IC A23 Portable VHF radio Locked


ic a 23 quero scannear como fazer /???
please scam mode /???

Mar 04, 2009 | ICOM Informatique IC-A23 VHF NAV/COM Air...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

798 people viewed this question

Ask a Question

Usually answered in minutes!

Top ICOM Informatique Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73611 Answers

Are you an ICOM Informatique Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...