Question about Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
http://www.retrevo.com/support/LG-42LC2D-TVs-manual/id/373ag102/t/2/ Above is your user manual, below is your service and repair manual. http://www.givemefile.net/smanuals/lcd_tvs/lg/42lc2d.html
Posted on May 27, 2010
SOURCE: My sister has just bought
Go to the TV setup menu and autodetect all channels. This should fix it. This is assuming your Sister is not using a set-top box.
In that case, you neet to leave the set on either channel 3 or 4, or use the video/audio input jacks and leave the set on VIDEO IN. The best picture with a non-HDMI set-top box will always be with the AV OUT from the box going to AV IN on the set [the white/red (audio left/right) and yellow(video) connections].
If she is using a set-top box with an HDMI output, connect an HDMI cable to the set and select HDMI IN for the absolute best picture.
Posted on Jan 29, 2011
SOURCE: i have done an autotune on my sony bravia tv but am not getting channel 9 sbs. the television in the bedroom is a smaller digital tv and that picks up all the channels. the two tv's are connected
Is the splitter an amplified splitter or not? Have you tried the channel search when you connect the antenna directly to the TV? (Disconnect the cables from the splitter and use a coupler to join them together.) Tuners do vary in their sensitivity. For digital signals, your TV should report the signal strength. This is often under the Settings sub-menu. Some TVs will give this information in the Channel Edit option.
If the straight through connection gives a better signal, check your antenna direction and try a different splitter. Amplification will often help; however, when my amplified splitter was damaged the less sensitive tuner lost a number of channels that the other TV received. (Looking at the signal strength, one TV was getting adequate signal with one bar out of 8. The other needed at least 4 bars to process the signal.)
I hope this helps.
Posted on Feb 01, 2012
Tips for a great answer:
Jan 20, 2016 | Element Electronics FLX3210 32 in. LCD TV
Dec 11, 2015 | Pegasus 7" ST07-B Portable Handheld...
Feb 01, 2012 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV
Aug 11, 2011 | Samsung LE32R74BDX 32 in. HD-Ready LCD...
Jan 29, 2011 | Sanyo Televison & Video
May 08, 2010 | Televison & Video
May 17, 2009 | Microsoft Xbox 360 Console
Oct 18, 2017 | Sony Televison & Video
28 people viewed this question
Usually answered in minutes!