Question about Computers & Internet

1 Answer

My printer(epsom rx510) prints too much red/orange in photos. Have tried re calibrating by holding the b/w, colour, stop and power buttons simultaneous till it says on the lcd screen "INIT. EEPROM. When i push the colour button once, the screen then shows "push power sw". ?????? Not sure what to do here. Help please! In anticipation, many thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My guess is that the CYAN cartridge has run out (or stopped printing due to nozzle blockage), hence the yellow & magenta appear much more dominant.
Check the ink levels in the cartridge &/or get the nozzles cleaned.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon Pro9000 MarkII prints photos with a red tint


You probably haven't calibrated your monitor to show the correct colours, so in whatever photo programme you're using, you're setting the red tones too high. Test this by first not calibrating your monitor, but turning down all the red tone until it looks washed out. Print this and see if it's better. If so, set your monitor to a cooler colour temperature. If the result is no better, check your print dialogue settings to make sure you are using an appropriate colour profile. And, for example, if you're using Photoshop, tick 'let Photoshop manage colours' in the advanced profile settings box. Hope this helps. I doubt there's anything wrong with the printer.

Dec 29, 2012 | Canon Pixma Pro 9000 MARK II InkJet Photo...

1 Answer

Colour cartridge is not being recognised after it has been refilled. tried cleaning the printer head as well as the nozzle. please suggest any solution.


Perform an EEPROM reset:


1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe


Dec 17, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon Pixma MP150 waste ink absorber full. Any solution that I can use at home?


Hi there here are some ways to try but remember you will have to clean it out soon.

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Varianta II:

1. printer OFF, press RESET (first button on the right, marked with red and two dashes above);
2. hold RESET and press and then release POWER (ON);
3. continue to hold RESET and press PAPER button until it reaches A4 plain paper position;
4. release any button (now u should see orange 1 on the printer screen.

Comentari despre varianta II:
- the PAPER button is the black one - opposite to the + one.
- You said that you solved the code reset for the MP150. However, I couldn't follow your instructions because the first button to the right on my MP150 is the ON/OFF button. The STOP/RESET button on my printer has a red circle with a triangle inside. Is that the same in your MP150?

De incercat MP170:
1 power off.
2 hold stop/reset ,hold ON/OFF
3 release stop/reset, push stop/reset twice, quickly, then release ON/OFF
4 wait untill LCD display shows "Canon Idle",then push stop/reset four times, quickly
5 then push power twice, quickly
6 power off and power on.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks


Feb 17, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Ink absorber is full.


Try this:
How to clear E27 Waste ink absorber full
1.With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2. When the Power is lit, press the Stop/Reset button two times
while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4. When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)

Note: press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print

2 times Green EEPROM print
3 times Orange EEPROM reset

4 times Green Waste ink counter reset
5.Turn off the printer.( it must be turn off) then turn it on again


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 01, 2009 | Canon PIXMA iP6310D InkJet Photo Printer

1 Answer

Coloured lines through photo


low ink level, try to replace colour catridge

Mar 21, 2009 | HP DeskJet 3745 Printer

2 Answers

Printer eror for Epson RX510


Hi just thought i'd share this as it fixed my printer (RX510) after getting problems

I found this info about reseting the RX510.

*Turn the printer off.

*Press and HOLD all the following buttons: Power, Load/Eject, Stop, B&W, Color.

*RELEASE BUTTONS when you see "Init eeprom" on printer screen. Press Colour
button to clear protection counter.

This will clear the message about parts in your printer reaching the end of their useful service life (you should also wash out the ink pads in your printer when you do this)

Hope this helps.

Dec 19, 2008 | Office Equipment & Supplies

1 Answer

Epsom Rx620 states use originals for ink cartridges


Try to hold down both 'stop' and 'B&W' button when you press the 'on' button to start the printer machine. This should erase the error message and let you print.
Regards.
Gordon

Sep 25, 2008 | Epson RX620 All-In-One InkJet Photo...

1 Answer

Zebra tlp 2844 trouble


Verify that the ribbon fits into position, back and forth. You can also calibrate the label by pressing the button while powering up the printer and release the button.

Aug 02, 2008 | Zebra R2844-Z Label Printer

2 Answers

Unasble to print


TRY THIS STEPS...
Mp150 Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Nov 07, 2007 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Canon pixmaip2200


TRY THIS STEPS...
Mp150 Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Oct 25, 2007 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...