Question about Husqvarna Sewing Machines

1 Answer

I dont know where to put the oil - Husqvarna Sewing Machines

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Husqvarna Master
  • 17,130 Answers

There are small holes what you find along the moving parts indicating that it is a oil lubricating point. You might just have to use a tiny drop to get the oil to move along the holes to the spindle bearing/bush blocks or within the mechanism. Do not attempt to use too much oil but only if the machine is too dry as seem with a good lighting.

Happy New Year.

Posted on Dec 31, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I dont know where to put oill in my machine?

There are no places for you to oil, the machine does need oil though. It needs to be taken apart by a tech every 2 years or so for lubrication

Sep 02, 2012 | Brother SE-270D Computerized Sewing...

1 Answer

Harry Prisma 37 Petrol or mix?

your question was put in the sewing machine catagory,
if you put it in the lawnmower catagory, then someone can help you
with a answer

Jun 02, 2012 | Sewing Machines

1 Answer

Bernina Arista 730 Check hook system - This won't sew correctly and is frustrating as I just used the system last night to do embroidery.

The 730 rotary hook is a bit sensitive to adjustment and cleaning. Make sure that the hook is clean and if you haven't oiled it for a while, give it a drop of oil (do you know where to put it ... many dont !) Check your needle is OK and, again, if used for a while, just put a new one in anyway. Load-up with different colours of the same type of thread top and bottom and sew-off a sequence of zig-zag, starting with the default and increasing the width and reducing the length until you get to a maximum width satin-stitch (dont increase the bobbin or top tension as you do it). Once you've done that, let me know what it looks like. The colours should be equal top and bottom, but maybe just a bit of top coming through to the underside on max width satin stitch. You'd also be advised to sew-off using pattern number 437 and the figure '9' - this will check the balance of the machine. If the '9' is not perfect, or the top section of the pattern 437 is not dead-central on the top of the triangular part of the pattern, the balance may need adjustment. Let me know how you get on.

Oct 16, 2011 | Bernina Sewing Machines

1 Answer

Where are the oiling points on my white 1418 machine? i dont have the manual, and i dont want to just put oil in any hole i see

You can download a manual from the Singer site.
Just type in 1418 and click on search.
On the next page choose free download!
The oiling instructions are on page 29 of the 31 page PDF file.
Hope this helps!

Aug 30, 2010 | White Sewing 1418 Mechanical Sewing...

1 Answer

How to oil Spartan 327k sewing machine

Use only sewing machine oil. Get an oiler with a long spout so you can reach far places, put a single drop of oil on every place that has metal moving on metal.

Feb 09, 2010 | Sewing Machines

1 Answer

How do I oil my Janome My Excel 18 w ? My machine has started to make a squeeking sound when sewing .I think it might need oiling but dont know where to put the oil?Can you please help me with this .

Take off all the outside covers you can, then basically put a drop of oil on anything that moves when you turn the machine over by hand. After this run the machine for a couple of minutes with no thread or fabric, you then need to wipe up any excess oil and refit all the covers.

Oct 10, 2009 | Sewing Machines

1 Answer

User manual

You can download the manual from the Singer website:
Good luck!

Sep 25, 2008 | Singer 3116 Simple

1 Answer


Most every machine has an oiling diagram in the instructions but if yours is gone then don't be afraid to take the covers loose and oil anywhere 2 moving metal parts come togeather but only a drop. Over-oiling will cause a heavy collection of lint and dirt possibly causing damage later on. Don't be afraid to remove the covers, just put them back on the way they came off. While your at it, give it a good vacuum, or blow and brush it out. Good luck.

Sep 09, 2007 | Singer 1725

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

194 Answers

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Wayne Fellows
Wayne Fellows

Level 2 Expert

262 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides