Question about Zanussi FJS1225W Front Load Washer

2 Answers

Zanussi Turbodry jetsystem 1200

What is error code E90 on this washing machine
posted By steve

Posted by on

  • yvonne3005 Jul 23, 2008

    I am also getting this E90 error can anyone please help ?

  • Anonymous Mar 22, 2014

    E320

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hiya
e90 means there is a communication error between the circuit boards inside. remove the plug then take the lid off the machine, remove the block which has the 5 (iirc) blue wires in it and give it a quick squeeze then replace, this should hopefully solve your problem.

hope this helps

please dont forget to rate the helpfulness of this reply, thanks kj

Posted on Aug 03, 2008

As far as i can gather error e90 means everything is not working it could be the pump the brushes or the circuit board, i have checked the board which seams ok so its onto the brushes next

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does e90 mean?


  • E90 Error - YouTube www.youtube.com/watch?v=IhHvw2K7XO0
    • BY D CUTHRELL
    • 3 MIN
    • 24K VIEWS
    • ADDED 2012-11-16
    Video embedded · E90 Error Code on Frigidaire Washer cleared with Hair Dryer.
  • Frigidaire E90 Error ' eHow www.ehow.com > Home > Home Appliances > Washer & Dryers Frigidaire E90 Error. Frigidaire front-loading washing machines offer a control panel with keypads to set the desired wash cycle and any options, as well as monitor ...
  • Zanussi Washing Machine displays an error code E90.? howtomendit.com > ... > Household Appliances, Washing Machines How to fix anything. Free repair help - zanussi washing machine displays error code e90.

  • Dec 23, 2015 | Washing Machines

    1 Answer

    Zanussi jetsystem 1400- error e90


    e90 is configuation problem reinstating configuration code may fix this(not easy to do) or electronic has lossed communication with display board. can be a bad connection between electronic and front display board. faulty electronic board the most likely.

    Jul 23, 2010 | Zanussi FJS1225W Front Load Washer

    1 Answer

    Zanussi jetsystem turbodry 1600 wjs1665 w is not heating the water


    More than likely the heater element has failed.
    This is located at the rear of the washer drum.
    It means removing the rear half of the cabinet to access it.

    Mar 29, 2010 | Zanussi ZWF1430W Front Load Washer

    1 Answer

    The drier won't heat up and it flashes up a number (I'll check tonight again what the number is). it washes fine but won't dry. It is a Zanussi Jetsystem Turbodry 1200.


    Hello,

    Have you fixed the problem yet? And if yes, how??
    I have the same washing machine with the same problem. So I hope you can help me!

    Best regards,

    Nourah van Leeuwen

    Jul 22, 2009 | Washing Machines

    1 Answer

    Zanussi jetsystem turbodry 1200 door wont open


    its the doorcatch,turn power off, remove lid and put hand in machine where doorlock is situated feel about and try open catch, repair or replace?

    Jun 24, 2009 | Zanussi ZWF1420W Front Load Washer

    1 Answer

    WASHING INSTRUCTIONS ZANUSSI ZJD 1285


    CLICK HERE



    Please download asap - as it is stored on my personal FTP site, and will be removed in 48 hours.

    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

    Jan 16, 2009 | Washing Machines

    1 Answer

    What is E 40 on Zanussi Turbodry 1200?


    E40 indicates the doors not closed properly. Sometimes it can be the lock itself or the main control board

    Nov 24, 2008 | Zanussi FJS1225W Front Load Washer

    1 Answer

    Zanusssi jetsystem turbodry 1200


    clean out filter, door bottom right, unscrew filter and clean it

    Aug 02, 2008 | Zanussi IZ161S Front Load Washer

    2 Answers

    Zanussi jetsystem Turbodry 1200


    replace the circuit board

    Feb 19, 2008 | Washing Machines

    4 Answers

    Zanussi jetsystem Turbodry 1200


    It appears that you may have a faulty door interlock or a faulty PCB. pcb is not really a DIY job as some boards require proramming on certain versions. Regards Advisor

    Oct 30, 2006 | Zanussi FJS1225W Front Load Washer

    Not finding what you are looking for?
    Zanussi FJS1225W Front Load Washer Logo

    1,651 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zanussi Washing Machines Experts

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1456 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...