How to get off mold of the wook of my bass guitar (Ibanez sr3006)?

Know the year etc? Ibanez have them on-site.

Ibanez com Wiring Diagrams

The guitar was made at the Saein Plant, Korea in February, 2005.

Depending on the exact model number and condition, it would sell for approx US$600-900. They are quite well regarded.

This bass was made by Cort in Korea, in Jan 2004. They sell used for US$150-250 depending on condition.

If you are getting a buzzing sound, the ground connection is wrong. If you google how to wire an electric guitar there is a lot of info on it.

You can find that here:
http://www.ibanez.com/products/u_eb_detail.php?year=2016&cat_id=2&series_id=51&data_id=149&color=CL01

It was produced in March 2007

To remove the knob, there should be a small hex key or allen screw on the side of the knob. Just loosen the screw. You don't have to remove it.

To tighten the nut properly, you may have to remove the back panel of the bass and hold the potentiometer from the other side. If allowed to turn too much, it could mess up the wiring.

You need to contact Ibanez direct for exact specs

This should do it:http://www.ibanez.com/support/wiringdiagrams

Here is a diagram:http://forum.ibanez.com/default.aspx?g=posts&t=78892