Question about Whirlpool 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System

1 Answer

Looking for water filter to be replaced. The red light is on and I can't find filter.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On a Whirlpool you can check the bottom front black vent piece, filter cover looks like a half-moon shaped cover. Its under the freezer side. There is a thumb-sized black push button next to it which will 'eject' the filter. Push on the black button and the filter pops out

Posted on Dec 31, 2010

  • flipr2922 Dec 31, 2010

    On a whirlpool side x side, at the bottom of the front is a black plastic louvered trim piece. Under the freezer side, in that louvered trim, there is a round half-moon shaped cover. Your model may turn, or there could be a push button next to it. Pushing the button will eject the filter.

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 111 Answers

SOURCE: Water Filter light still red after new filter installed

You have to reset the light by pressing and holding the touch pad for 3-5 seconds. It doesn't reset on its own when you replace the filter

Posted on Dec 19, 2008

  • 2 Answers

SOURCE: red light blinking after replacing filter

Not positvie for that model but there should be a little reset button, or try just unplugging the unit and waiting 60 secs before plugging it back in. Hope that helps

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Im at the six month point, red light flashing, which of the filters do i replace and do i need to sanitize the storage tank?


The filters that you should replace every the six months are the two pre/post filters (FQROPF). The membrane (FQROMF) needs to be replaced every 1 to 2 years. During the filter change, bacteria could be introduced, so it is recommended that you sanitize the tank while changing the filters. Here are the filters you need to replace:
http://www.freshwatersystems.com/p-7787-ge-profile-fqropf-smartwater-ro-pre-and-post-filter-set.aspx

Apr 09, 2013 | General Electric Profile Smartwater Ultra...

1 Answer

After i change the water filter de button of water still red


The water filter status light, located at the top of the refrigerator

compartment, will help you know when to change your water

filter cartridge.

Style 1 - Standard status light (on some models)

When the water filter status light changes from green to yellow,

this tells you that it is almost time to change the water filter

cartridge (90% of the filter life has been used). It is recommended

that you replace the base grille water filter cartridge when the

water filter indicator light changes to red OR water flow to your

water dispenser or ice maker decreases noticeably. See

"Changing theWater Filter Cartridge" later in this section.

After changing the water filter cartridge, reset the water filter

status light by pressing the light switch 5 times within
10 seconds. The water filter status light will change from red to
green when the system is reset.
If you need Adobe Reader Click=> Adobe Reader X (10.1.0) (50.25 MB)
If helpful please rate this solution, Thanks Sea Breeze
Click Photo Below for User Manuals


sea_breeze_227.jpg

Jul 29, 2011 | KitchenAid Superba KSRG25FK Side by Side...

1 Answer

I am replacing the water filter how do I reset on the outside door


The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Thanks, Sea Breeze

May 17, 2010 | Jenn-Air JCD2295HES Side by Side...

1 Answer

Red light stays on after changing the water filter and running about 2 gallons through it


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Nov 27, 2009 | Maytag MZD2665HE Side by Side Refrigerator

1 Answer

Change filter light


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Sea Breeze

Nov 25, 2009 | Maytag MSD2650H Side by Side Refrigerator

1 Answer

Changing light after installing new water filter


Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the LOCK and WATER
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Aug 12, 2009 | Jenn-Air 21.6 cu. ft. Side-By-Side...

1 Answer

Water Filter light still red after new filter installed


You have to reset the light by pressing and holding the touch pad for 3-5 seconds. It doesn't reset on its own when you replace the filter

Dec 08, 2008 | Samsung RS2630SH Side by Side Refrigerator

1 Answer

Filter light still on "Red"


try holding ice type and child lock together for 3 seconds that worked on mine

Mar 30, 2007 | Maytag MSD2454G Side by Side Refrigerator

Not finding what you are looking for?
Whirlpool 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...