Question about Nintendo Wii Console

1 Answer

My wii do not start, there is no light when I push on the power, I have tried to disconnect and reconnect and nothing. I have changed the batteries no change, Is it possible that the power supply is dead? The wii worked perfectly 2 days ago.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 187 Answers

Hello there

From what you have said it sounds like you have the NO POWER ERROR

The main causes are Hardware failure, overheating or wear & tear.

You may need to perform simple maintenance, clean or in some cases adjust settings.

To get the best advice on where to start I recommend a Wii Repair Guide , From this you can fix the problem at home and avoid any large repair bills. Its easier than it sounds when you have help from the guide.

The other solution would be to send the console off to Nintendo, This is free if your still in warranty. If your console is out of warranty then the usual price of repair is $90



Glad I could Help!

Good Luck & Best Regards

Pete

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wii remote wont work change batteries and all lights at bottom just keep blinking


Sync it.Open the front cover on your Wii, then push the red button there, then open the batteries cover on your Wii Remote and push the red button there.If this not help press and hold the red SYNC button on console for 15 seconds. This will clear all synced Wii Remotes from the console.Then try to sync Wii Remote again.

Nov 04, 2009 | Nintendo Wii Console

2 Answers

Power?


is this via the remote or on the machine if remote change the batteries if machine there will be a small connection from the button to the circut switch that may be broken its just a small plastic button but a sod to fix by hand as you need to dismantal but i hope that helps

May 29, 2009 | Nintendo Wii Console

1 Answer

Wii is dead


1. push the reset button and if that doesn't work unplug all cords and memory cards (including sd) from wii and unplug av from the wii and the outlet in wall. Wait 2-3 min or unplug the wii overnight and The trick i use was to literally smack the power supply on the ground and plug it back in. It seemed to work for a few weeks, until you buy a new power cord Don't call Nintendo unless you've got some money. it'll be $82 bucks.

May 06, 2009 | Nintendo Wii Console

2 Answers

Remotes can't be found


When you change the batteries for a Wii Remote (in my experience) you have to re-sync (reconnect) them to the Wii console. To do this, there is a button on the Wii Remote by the batteries that either says sync or will show curved bars on I think i red button. This same button should be located on the Wii console. You have to push the sync button on the Wii then on the remote to sync them together. This should solve your connection problem.

Apr 29, 2009 | Nintendo Wii Console

3 Answers

Wii wont turn on


Try the Wii "RESET".
Here's how:
1. Unplug the Wii for at least 5 minutes.
2. Plug it back in.

Apr 24, 2009 | Nintendo Wii Console

1 Answer

Xbox 360 controller


If the control is blinks in sequence with the four LED light on the XBox 360 but it does not change to only one LED, being the one that corresponds to which player the control is, you need to remove the batteries from the control then disconnect power from your XBox 360. Wait a few minutes before reconnecting power to either then attempt to sync the control again. This resolves most issues.

Jan 30, 2008 | Microsoft Xbox 360 Controller

1 Answer

Reconnecting


When you turned off the Wii, did the light turn red or amber?
If you haven't done this already, hold the power button until it shuts off, and the light is red. Power it back up and try your remote again.

Jan 25, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

905 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...