Question about GPS

2 Answers

Don't now who to turn on radio to enter security code on the radio

Posted by on

  • hollis_sharo Dec 31, 2010

    2006 79 rv toyota radio have power but dose not tune on to enter security code

  • hollis_sharo Jan 03, 2011

    you haven't fixed my problem its got nothing to do with a GPs

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,416 Answers

Hello,

GPS has an in-built system that you can access using the control panel and touchscreen console in the dash. The control panel also controls other functions of the vehicle, such as the CD player and radio. By default the navigation screen appears after 20 seconds of inactivity and continues to beep or provide audible directional assistance, even when not needed. You can change the navigation system options so that it no longer does this or turn the unit completely off using the buttons on the control panel and touchscreen.
Instructions as step by step instruction.

    Prevent System from Switching to GPS
  1. Press the "Setup" button on the right side of the control panel. The "Setup" screen will appear on the touchscreen.
  2. Press "General" on the touchscreen.
  3. Press "Auto Screen Change" until it is set to "Off." This prevents the control panel from automatically returning to the navigation screen when you change the screen.
  4. Press "Beep" until it is set to "ON." Press "Save." This prevents the navigation system from beeping.
  5. Enter back into the "Setup" screen and press "Voice" on the touchscreen. Press "Off" on the touchscreen and then press "Save." This prevents the navigation system from speaking to you.
  6. Press the "CD," "FM" or "AM" button on the left side of the control panel to enter into the associated audio mode. The until will not return to GPS mode unless you manually select it from the control panel.
  7. To Turn Off System Completely
  8. Press the "DISP" button on the right side of the control panel. A menu will appear on the touchscreen.
  9. Press "Screen Off" on the touchscreen to turn the unit off.
  10. Press "DISP" again to turn the unit back on
Hope this Help?

Good luck and thanks for using fixya.

Posted on Dec 31, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,924 Answers

Just push the power button ..and if it asks for the security code ..insert it and push Ok button ..it will unlock the features..and power it on ..

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I enter radio code?


Use the radio station preset buttons to enter the code after you turn on the power to the radio. The radio's display may say "CODE" asking for the security code.

Mar 31, 2016 | 1993 Acura Vigor

1 Answer

Hyundai getz radio security code


When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Hyundai service centre and get them to enter this code for you.

May 09, 2013 | Audio Players & Recorders

1 Answer

After battery was disconected on 2006 Chevy Aveo began having problem with radio unit freezing up


You need to enter the radio security code anytime the radio has lost battery power. the code was supplied to the orig owner of the car. If you don't have it then you must see the dealer for help to unlock the radio

Nov 02, 2012 | Cars & Trucks

1 Answer

SEC appears on the radio Lexus ES300


SEC stands for security, the radio is in theft lock you must enter the unique code security that came with the car when new to unlock the radio, this SEC is triggered whenever the radio losses power like a theft or a battery disconnect. If you don't have this unique code you must see the Lexus dealer, they can look it up in the factory information link, it goes by the serial number of the radio and the VIN or the car.

Jun 28, 2011 | Lexus ES 300 Cars & Trucks

1 Answer

2000 Chevrolet Lumina Unlock radio code


If you have the security code it's easy. The code is something that either you or a previous owner entered. If you don't have the security code a trip to the dealer will be in your future.


Unlocking the Theft-Deterrent Feature After a Power Loss

Enter the code as follows; pause no more than 15 seconds between steps.

  1. Turn ON the ignition. LOC will appear on the display.
  2. Press MN and 000 will appear on the display.
  3. Press MN again to make the last two digits agree with your code.
  4. Press HR to make the first one or two digits agree with your code.
  5. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure.

Entering the incorrect code eight times will cause INOP to appear on the display. Wait an hour with the ignition in the ON position before you try again. When you try again, you will have three more chances (eight tries per chance) to enter the correct code before INOP appears.
Deactivating the Theft-Deterrent Feature

Enter the code as follows; pause no more than 15 seconds between steps.

  1. Turn the ignition to ACC or ON.
  2. Turn OFF the radio.
  3. Press the 1 and 4 buttons together. Hold them down until SEC shows on the display.
  4. Press MN and 000 will appear on the display.
  5. Press MN again to make the last two digits agree with your code.
  6. Press HR to make the first one or two digits agree with your code.
  7. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show -- -- --, indicating that the radio is no longer secured.

Entering the incorrect code will cause SEC to appear on the display. The radio will remain secured until the correct code is entered.

Dec 27, 2010 | 2000 Chevrolet Lumina

1 Answer

Malibu 2001 radio locked


hi friend,
If you have the security code it's easy. The code is something that either you or a previous owner entered. If you don't have the security code a trip to the dealer will be in your future.
Unlocking the Theft-Deterrent Feature After a Power Loss
Enter the code as follows; pause no more than 15 seconds between steps.
  1. Turn ON the ignition. LOC will appear on the display.
  2. Press MN and 000 will appear on the display.
  3. Press MN again to make the last two digits agree with your code.
  4. Press HR to make the first one or two digits agree with your code.
  5. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure.
Entering the incorrect code eight times will cause INOP to appear on the display. Wait an hour with the ignition in the ON position before you try again. When you try again, you will have three more chances (eight tries per chance) to enter the correct code before INOP appears.
Deactivating the Theft-Deterrent Feature Enter the code as follows; pause no more than 15 seconds between steps.
  1. Turn the ignition to ACC or ON.
  2. Turn OFF the radio.
  3. Press the 1 and 4 buttons together. Hold them down until SEC shows on the display.
  4. Press MN and 000 will appear on the display.
  5. Press MN again to make the last two digits agree with your code.
  6. Press HR to make the first one or two digits agree with your code.
  7. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show -- -- --, indicating that the radio is no longer secured.
Entering the incorrect code will cause SEC to appear on the display. The radio will remain secured until the correct code is entered. When battery power is removed and later applied to a secured radio, the radio will not turn on and LOC appears on the display. To unlock a secured radio, refer to "Unlocking the Theft-Deterrent Feature After a Power Loss".

hope this helps u
please rate me..............
thank u for using fixya
regards
sivvaranjini

Nov 26, 2009 | 2001 Chevrolet Malibu

1 Answer

How to enter security code on kenwood dnx5220bt?


Hi, I just looked for answers and found the below mentioned procedure.

This was posted previously on another post. ....
Procedure:
01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are from STEP 05

07. Call 1 800 537 5140

08. Press 1 then #. You’ll hear Invalid Code, try again

09. Press 139010 then #. You will be asked to enter your four or six digit code followed by *

10. Enter the number from STEP 6 then *

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC

Your radio is now un-locked and usable This will surely help you. THanks Kanu

Oct 15, 2009 | Kenwood DNX7100 Car Video Player

1 Answer

Radio won't turn on - EQ lights flash


My Sebring radio won't turn on - it has power. The EQ lights flash - almost like a security code needs to be entered.

Apr 09, 2009 | 2001 Chrysler Sebring

1 Answer

I have a hyundai sonata classic 2000 model disconnected the battery lead to clean them, now the radio will not work I have a security code but not sure how I put it in to radio


Once you turn on the unit, "1 CDE" will appear on the LCD. Then using preset button 1~4 enter the 4 digit security number supplied on security card. After confirming the number, press preset button 5. This should unlock the player. If the incorrect code is entered "2 CDE" will appear on LCD and if incorrect code is entered again, "3 CDE" will appear on LCD. If, after the third attempt, the code is incorrect, the set will turn off. Wait 1 hour before re entering a security code.

Aug 26, 2008 | 2000 Hyundai Sonata

1 Answer

Reset security code on AU Falcon


turn key to <acc> turn radio will blink err. leave on for at least half hour.err will be replaced by enter code.

Mar 25, 2008 | Radio Communications

Not finding what you are looking for?
GPS Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

kakima

Level 3 Expert

102366 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...