Question about D-Link AirPlus DI-614+ Wireless Router

1 Answer

Im forget my password i would like to reset my DI-614+ but when i press the button reset it dnt make noting

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 4,338 Answers

You may held the reset button too long, try again:



How to reset D-Link router to the Factory Default Settings

In general, to reset the D-Link to the Factory Default Settings, please follow these steps:

1. Turn off the router

2. Locate the Reset button on the back of the router.

3. Use a paper clip to press the Reset button and power on.

4. Hold for about 5 seconds (don't hold too long) and then release. (Or, release when M1 and M2 flash at the same time.)

5. After you have completed the above steps, the router will be reset to the factory default settings


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe



Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Password protect wireless access


You'll need to access the administrator web page for your router, and then set a security key (password) for wireless users.

For step-by-step instructions for setting up security on the D-Link DI-614 router, see:

http://technicallyeasy.net/2010/10/how-to-secure-d-link-di-614-wireless-router/

Sep 04, 2012 | D-Link 2.4GHz Wireless Router DI-614

1 Answer

When i run wisard it ask about old passworld


This FAQ is for the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624M, DI-624S, DI-774, and DI-784.

Step 1 Open a web browser and enter the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The username is admin and the default password is blank (nothing). Click OK.

Step 3 Click the Tools tab and then click Admin to the left.

tools_admin.gif

Step 4 To change the administrative password, enter a new password in the Admin section.

To change the user password, enter a new password in the User section.

Step 5 Click Apply then click Continue to save the settings.

Note: If you forget your password, you can reset the unit to factory defaults.
Click here for instructions.

Nov 02, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I bougth a d1-614 router at am goog will store but i need to set it to defualts


To hard-reset the D-Link AirPlus DI-614+ to Factory Default Settings, do the following:

Turn off the DI-614+

Locate the Reset button on the back of the DI-614+

Use a paper clip to press the Reset button.

Hold for about 5 seconds and then release

After the DI-614+ reboots (this may take a few minutes) it will be reset to the factory Default settings.

Thanks for choosing FixYa, If you find this helpful please vote and comment.

Oct 13, 2010 | D-Link AirPlus DI-614+ Wireless Router

1 Answer

Hi, My d-link dl-604 suddenly stopped working. When I plug it in, only the power led and #4 lights are up. None of the other leds are responding nor the internet is not working as well. Please help. Thanks


The following reset procedure will completely restore the default settings on your D-Linkmag-glass_10x10.gif device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP.

Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

Note: Do not recycle power during the reset procedure.

The default user name for most D-Link devices is admin and the password is left blank.

Hope this helps! Give me thumbs please!

Aug 23, 2010 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Reset dlink 614+ router, forgot password


I don't know for the 614 as there isn't a model like that... Your picture shows a DI-514. Here is the process for that model.

To hard-reset the D-Link Plus DI-514 to Factory Default Settings, please do
the following:
• Leave the device powered on, do not disconnect the power
• Press the reset button and hold (use a paper clip)
• Keep the button pressed about 10 seconds
• Release the button
The DI-514 will then automatically reboot itself.

If you truly have a 614, can you post more about the model number? It's usually written on the bottom of the router.

Aug 30, 2009 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

D-link DI-614 won't reset and the password stays same


Hi,
For problem that you have posted, you can try doing a hard reset on the device by taking a paperclip and perform a hard reset. With unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights
will blink, and then stabilize. After the router stabilizes, open your browser and enter
192.168.0.1 into the address window and hit the Enter key. When the
password dialog box appears, enter the username admin and leave the
password blank. Click OK.
Please let us know if that was helpful enough.
Good Luck & Thanks
Shiv.

Aug 12, 2009 | D-Link AirPlus DI-614+ Wireless Router

1 Answer

Can't access D-link DI-614+ as admin


Direct from the D-Link FAQ's
This reset procedure applies to the following devices:
DI-704  DI-704P  DI-713  DI-713P  DI-714P+  DI-804HV  DI-808HV
  • Step 1 Power the unit off by unplugging its power adapter.
  • Step 2 Insert a paper clip in to the reset pinhole. Press and hold the reset button with light pressure.
  • Step 3 Power the device back on by plugging it in. Continue to hold the reset button.
  • Step 4 Watch the lights on the front of the gateway. The M1 & M2 should come on solid. When the M1 & M2 begin to blink slowly, release the reset button.
The unit will reboot itself and should be at factory defaults. If the M1 light is not blinking about once per second, recycle the power on the gateway.
If the M1 & M2 continue to blink rapidly, you held the reset button for too long. Power the device off and repeat the reset procedure. The default IP address is 192.168.0.1. The default username for our routers is admin. The password is blank. If your router asks only for a password, use admin (lower-case).
The following reset procedure will completely restore the default settings on your D-Link device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP.
  • Step 1 Locate the reset pinhole on the back of the unit.
  • Step 2 With the unit powered on, press and hold the Reset button.
  • Step 3 Hold the Reset button for about 10 seconds.
  • Step 4 Release the Reset button.
  • Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.
  • Step 6 The device is now at factory defaults.
Note: Do not recycle power during the reset procedure.
The default user name for most D-Link devices is admin and the password is left blank. 
When it says hold for about 10 seconds, don't hold for more than ten seconds or the procedure will likely fail, if ten seconds doesn't work try 5 seconds.
P.S.: If this information was helpful, please rate this solution.

Mar 12, 2009 | D-Link AirPlus DI-614+ Wireless Router

2 Answers

Forgot pass word to router


im not sure how you can find the software but im pretty sure that you can reset the router by pressing and holding the reset button on the back of the router

Dec 30, 2007 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Forgot my password


The following reset procedure will completely restore the default settings on your D-Link device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624M, DI-624S, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP. Step 1 Locate the reset pinhole on the back of the unit. Step 2 With the unit powered on, press and hold the Reset button. Step 3 Hold the Reset button for about 10 seconds. Step 4 Release the Reset button. Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting. Step 6 The device is now at factory defaults. Note: Do not recycle power during the reset procedure. The default user name for most D-Link devices is admin and the password is left blank.

Feb 16, 2006 | D-Link AirPro DI-764 Wireless Router

2 Answers

Forgot my password


The following reset procedure will completely restore the default settings on your D-Link device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624M, DI-624S, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP. Step 1 Locate the reset pinhole on the back of the unit. Step 2 With the unit powered on, press and hold the Reset button. Step 3 Hold the Reset button for about 10 seconds. Step 4 Release the Reset button. Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting. Step 6 The device is now at factory defaults. Note: Do not recycle power during the reset procedure. The default user name for most D-Link devices is admin and the password is left blank.

Feb 16, 2006 | D-Link AirPlus DI-614+ Wireless Router

Not finding what you are looking for?

Open Questions:

See all D-Link AirPlus DI-614+ Wireless Router Questions

D-Link AirPlus DI-614+ Wireless Router Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...