Question about Nokia 6300 Cellular Phone

1 Answer

Restore factory settings caod reset - Nokia 6300 Cellular Phone

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

THESE ARE THE CODES FOR NOKIA 6300
Choose the ones you want

On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.


Let me know if it works

Regards
Tom

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

IPhone 5c. How can I restore?


Restore your device

Connect your device to your computer using the cable that came with it.

Select your iPhone, iPad, or iPod when it appears in iTunes.

In the Summary panel, click Restore.

Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content.
Feedback

iPhone 5c - How to Reset Back to Factory Settings - YouTube

z? 5:22 https://www.youtube.com/watch?v=__ujKpff2B4 Sep 29, 2013 - Uploaded by H2TechVideos For More Videos, Check Out My Website at http://H2TechVideos.com NEED HELP GROWING YOUR YOUTUBE ... gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==

How to perform a hard reset when my Apple iPhone 5c is ...

support.bell.ca/.../Apple-iPhone-5c.how_to_perform_a_hard_reset_whe... iPhone 5c - 8 GB (iOS 7) Insert the USB cable, then hold the Home key while connecting the iPhone to iTunes. On the computer, when prompted that iTunes has detected the iPhone in recovery mode, click OK. gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==

Use iTunes to restore your iPhone, iPad, or iPod to factory ...

https://support.apple.com/en-ca/HT201252 Oct 21, 2015 - Restore your device. Connect your device to your computer using the cable that came with it. Select your iPhone, iPad, or iPod when it appears in iTunes. In the Summary panel, click Restore. Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content.

How to Factory Reset an iPhone (Any Generation) ' Digital ...

www.digitaltrends.com > Mobile Dec 15, 2015 - How to factory reset an iPhone with or without using iTunes, no matter what generation it is.

Apple iPhone 5c hard reset

www.hard-reset.com > APPLE hard reset Reset iPhone 5c: Press and hold the On/Off Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

Perform a factory reset - Apple iPhone 5c 16GB Certified Pre ...

support.sprint.com/...factory-reset...iPhone-5c.../WScenario_542_50265... Perform a factory reset - Apple iPhone 5c 16GB Certified Pre-owned. Last updated: Oct 01, 2015. article View all tutorials. Did this solve your problem? Explore ...

Videos

Feedback

iPhone 5c - How to Reset Back to Factory Settings - YouTube

z? 5:22 https://www.youtube.com/watch?v=__ujKpff2B4 Sep 29, 2013 - Uploaded by H2TechVideos For More Videos, Check Out My Website at http://H2TechVideos.com NEED HELP GROWING YOUR YOUTUBE ... gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==

How to perform a hard reset when my Apple iPhone 5c is ...

support.bell.ca/.../Apple-iPhone-5c.how_to_perform_a_hard_reset_whe... iPhone 5c - 8 GB (iOS 7) Insert the USB cable, then hold the Home key while connecting the iPhone to iTunes. On the computer, when prompted that iTunes has detected the iPhone in recovery mode, click OK. gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==

Use iTunes to restore your iPhone, iPad, or iPod to factory ...

https://support.apple.com/en-ca/HT201252 Oct 21, 2015 - Restore your device. Connect your device to your computer using the cable that came with it. Select your iPhone, iPad, or iPod when it appears in iTunes. In the Summary panel, click Restore. Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content.

How to Factory Reset an iPhone (Any Generation) ' Digital ...

www.digitaltrends.com > Mobile Dec 15, 2015 - How to factory reset an iPhone with or without using iTunes, no matter what generation it is.

Apple iPhone 5c hard reset

www.hard-reset.com > APPLE hard reset Reset iPhone 5c: Press and hold the On/Off Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

Perform a factory reset - Apple iPhone 5c 16GB Certified Pre ...

support.sprint.com/...factory-reset...iPhone-5c.../WScenario_542_50265... Perform a factory reset - Apple iPhone 5c 16GB Certified Pre-owned. Last updated: Oct 01, 2015. article View all tutorials. Did this solve your problem? Explore ...

Feb 01, 2016 | Apple iPhone Smartphone

1 Answer

Cod resoftare nokia 7100s2


Restore to factory settings
To restore the phone back to factory conditions, select Menu > Settings > Rest. factory sett. and from the following options:
Restore settings only -0 to reset all preference settings without deleting any personal data
Restore all - to reset all preference settings and delete all personal data, such as contacts, messages, media files and activation keys

Apr 17, 2014 | Philips Televison & Video

2 Answers

Resetting factory settings


try reset it in iTunes

Jan 11, 2014 | Apple iPhone 4S

1 Answer

Reset factory settings on hp deskjet 1050


Reset the Printer to Factory Default Settings Restore factory settings Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language. To restore the product to the factory-default settings, follow these steps.
  1. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
  2. Turn the product on while you press and hold the Resume c02469297.gif button for 10-20 seconds. The Attention c02469293.gif light turns on.
  3. Release the Resume c02469297.gif button. The Attention c02469293.gif and Ready c02469296.gif lights cycle while the product restores factory defaults.
Reset HP 1050 DeskJet Series Cartridge

Jun 07, 2012 | HP Office Equipment & Supplies

1 Answer

How can I reset my c905 to factory setup


Restore phone to factory default settings
Restoring your phone can be useful if you lend out the phone or just want to restore your phone to factory default settings and delete all user data.
To perform a master reset of settings and delete all settings and user data:
  1. Select Menu > Settings > General (tab) > Master reset.
  2. Select an option:
    • Reset settings: If you want to delete all user data, such as contacts, messages, and downloaded games.
    • Reset all: If you want to reset both user data and restore all original phone settings.
  3. Select Continue > Continue.
  4. The phone restarts.
Note: When making a factory reset of all content, you may lose content that was in the phone when you purchased it.

May 28, 2011 | Cell Phones

2 Answers

How can i reset Encore enRTR-104 router to default factory settings? When i push the reset button after few seconds begin the light nr. 4 faster to blink. When i release the button - the reset is done in...


I found these instructions for resetting the router to the defualt settings:
Use the "Backup Settings" tool to save the Broadband Router's current configuration to a file named "config.bin" on your PC. You can then use the "Restore Settings" tool to restore the saved configuration of the Broadband Router that you set before. Alternately, you can use the "Restore to Factory Defaults" tool to force the Broadband Router to perform reset and restore the original factory settings.
􀁺 Restore Factory Default
To restore the factory default settings of the Broadband Router, click on the "Restore" button.
􀁺 Backup Settings
Press the "Backup Settings" button to save the current setting in a filed "config.bin" or given filename.
􀁺 Restore Settings
To restore the backup file to the Broadband Router, enter the path and filename on the restore settings.

You can find the manual here:
http://www.encore-usa.com/us/support/ENRTR-104

May 05, 2011 | Encore ENRTR-104 Router

1 Answer

I forgot my pasword, and i want to restore my factory setting on this phone been nokia 3600 slide so help me


Straight from the manual:
Restore factory settings To restore the phone back to factory conditions, select Menu > Settings > Rest. factory sett. and from the following options: 1. Restore settings only - to reset all preference settings without deleting any personal data 2. Restore all - to reset all preference settings and delete all personal data, such as contacts, messages, media files, and activation key
Best of luck!

Mar 15, 2011 | Computers & Internet

3 Answers

I need code of nokia 3600 classic reset factory setting


Hi,

To restore to factory settings you no need any codes.

Please follow the below steps to restore your mobile to factory settings

Menu > Settings > Restore factory settings

When you select this,It will ask for security code.The default security code for nokia mobile is 12345.If you have changed the security code then type that code.

It takes several seconds to bring it to factory settings.

Thank You

Aug 07, 2010 | Cell Phones

1 Answer

Factory reset how to?


In the Settings Menu of your handset, their's an option to RESTORE FACTORY DEFAULTS / RESTORE SETTINGS.

Select it and your handset will be resetted to Factory Settings.

Apr 24, 2009 | Samsung SCH-a870 Cellular Phone

Not finding what you are looking for?
Nokia 6300 Cellular Phone Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...