Question about Labtec Wireless Desktop (967263-0403) Keyboard

1 Answer

Hi, i have just purchased a labtec wireless keyboard and mouse and am experiencing some problems. the keyboard only becomes active when windows is launched, so i can't make any changes to the bios. can you advise me please? thank you very much. traian m.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 362 Answers

Hello, two possible solutions spring to mind.
1) Get yourself a standard wired keyboard to plug directly into the ps2 purple socket (next to the green one, which is the mouse connector) just keep it for those 'special needs moments'.
2) If you are plugging your wireless keyboard receiver directly into a usb socket, then you should have an adaptor supplied with your keyboard receiver that enables you to plug the usb end of the keyboard cable into the ps2 keyboard socket of the computer (the purple one) . That way your wireless keyboard will be able to work at bios level.
Hope you find these suggestions useful!
nicam49

Posted on Dec 31, 2010

  • mtraian Dec 31, 2010

    Hello

    Thank you nicam49 for your response. Unfortunately my computer does not have a ps2 socket. I only have usb sockets :-( .

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My mouse won't pick-up my icons !!!


go the bios setup and re enable mouse setting

Mar 26, 2010 | Labtec Wireless Desktop Keyboard/Mouse...

1 Answer

Does the labtec wireless mouse turn itself off when not in use


Hi,
You should always safely shut down and turn off your computer before plugging or unplugging the mouse from the PS/2 mouse port. If you do not safely turn off your computer, you may damage the mouse port, the mouse, or both.

Your Labtec mouse should detect and function by simply connecting it to the computer´s PS/2 mouse port or USB port. If you have 3 Button Labtec Mouse (M/N: M-CAC64), your mouse will work in the PS/2 and serial port with the supplied adaptor. If you are using the 3 Button Labtec mouse, we recommend using the PS/2 port. To determine the model number of your device, turn it upside down and look at the label. Model numbers are indicated by "M/N:". This will help you determine what system ports your Labtec mouse can be connected to.

Thank you

Mar 14, 2010 | Labtec Wireless Desktop Keyboard/Mouse...

1 Answer

Same problem winXP cannot find driver for labtec


There are drivers available here

http://www.opendrivers.com/freedownload/248954/labtec-media-wireless-desktop-800-v6.0-windows-vista-xp-2000-download.html

Aug 04, 2009 | Labtec Wireless Desktop Keyboard/Mouse...

1 Answer

Activation of keyboard


Did you receive a install disk for the keyboard and mouse. typically you need to run the install disk and then plug in the usb hub for the keyboard and mouse to be recognized by the computer. If tha does not work, restart the machinew/the usb hub and keyboard and mouse ready. Are there good batteriesin the keyboard, mouse and usb hub?

May 03, 2009 | Acer Computers & Internet

1 Answer

Labtec Wireless Desktop Keyboard and mouse driver


Also check to see if you have enough memory installed as this has caused problems for others. Bud

Oct 22, 2008 | Labtec Wireless Desktop Keyboard/Mouse...

1 Answer

Labtec ultra flat wireless desktop usb mouse & keyboard problems


im having simular problems but manage ome times by tapping caps lock,scrol lock and num lock from the momment you pc starts till the caps lock majes a noise, then i know its working, if mouse starts mocing slow and not clicking it is your batteries, got me mad this has and dunno how i aint smashed it lol

Jun 13, 2008 | Labtec 9674170403 Keyboard

1 Answer

Labtec Wireless desktop 1200 not working- win xp sp2


Seen to be a problem with power manager.
On Linux the solution what

echo -1 >/sys/module/usbcore/parameters/autosuspend

I find it here:
http://www.linuxquestions.org/questions/linux-hardware-18/usb-error-usb-2-4-device-descriptor-read64-error-71-643022/

Apr 26, 2008 | Labtec Wireless Desktop Keyboard/Mouse...

1 Answer

Labtec wireless desktop.


Could be radio interference from somewhere. I tracked my similar mouse problem down to emissions from the ethernet adapter that connects over the house mains wiring. Try the using the mouse close to the receiver, if it works ok interference is likely.

Jan 24, 2008 | Labtec Wireless Desktop Keyboard/Mouse...

Not finding what you are looking for?
Labtec Wireless Desktop (967263-0403) Keyboard Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Computers & Internet Experts

micky dee

Level 3 Expert

2776 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Labtec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...