Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

How do we get the adgitator out? Lost a piece of jewelry... want to see if it's lodged underneath Email or call 419.236.6996

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

If you have the softener dispenser cup, remove it by pulling up on the blue ring, and then pop the cup off. This exposes the flat agitator cap. Gently pry it up to get it started, and it, too, will snap off. If you have a dust cap inside the agitator, remove it. This will expose the 7/16" hex head screw that attaches the agitator to the shaft. Remove the screw and the agitator will lift off the shaft.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I used 20 gage, silver colored, craft wire to make a ring, and it turned out really nice. But the silver color is coming off and exposing the copper underneath. It's ok that my ring is turning, but I made...


Laurie,the answer is simple you are going to have to use sterling silver wire to make your jewelry,this will eliminate the problem,and it is literally just a few cents more per piece.Silver wire is sold by weight,most silver rings i make weigh less than 10g,when you make jewelry that does not weigh much always opt for quality materials.This will ensure something you are proud of and your customers will appreciate. Mario.

Sep 02, 2013 | Darice 20 Gauge Silver Craft Wire, 15...

7 Answers

Where can you rent jewelry for weddings from?


See Nice Jewelry has Nice Stylish Fashionable and Cute Affordable Jewelry, made with you in mind


See Nice Jewelry See Nice Company
see nice jewelry logo-o53mevzccp1gsqgclrqhw325-3-0.jpg

Feb 27, 2013 | Clothing

1 Answer

Washing machine dose not aditate anymore


pull up the agitator, you may need to get a belt wrap it underneath and yank it up, please be careful that it doesnt hit your eye and under the agitator is a coupler or bell that needs to be replaced, it is stripped, loosen the bolt and replace

Mar 07, 2010 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Material chord lodged around agitator of kleenmaid KAW393 washer


sorry to saybut you would probley need to stripp down most of the unit...to remove chord.

Dec 30, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Brand new dishwasher and the motor is straining and no water is spraying during cycle.


It sounds as though you have a small piece of food that has lodged in the spinning wheel underneath. Check out the diagram before cleaning it out.

Dec 15, 2009 | GE Nautilus 24" Built-in Dishwasher

1 Answer

My kenmore 70 series will not agitate. It rocks back and forth but center doesn't move. Now if i put my hand on the top of it and press it down it does just fine. Is there a gear that may be broke in the...


Not a gear, Four peices of plastic.  They are about $2 and really easy to replace.  Take the cover off of the top of the adgitator with a flathead screwdriver, and there will be a bolt underneath it.  Take the adgitator off, and seperate the two halves.  There are four pieces of plastic known  as dogears because of their shape.  Replace those and it will work

Dec 04, 2009 | Refrigerators

1 Answer

Hot point washer heavy duty 7 cycle jewelry caught under spinner


if the unit is just a few months old the agitator has not seised the the shaft. the very top of the agitator should unscrew and with a little effert you should be able the lift the agitator off the shaft collect the jewlry and put it back together all should be find

Aug 10, 2009 | GE WBSR3140DW Top Load Washer

2 Answers

Adgitator removal


Just follow these steps:

1. Remove the center dispenser from the top of the agitator. It should just pop off.
2. Locate the white plastic cap underneath and pull straight up to remove.
3. Locate the agitator bolt underneath and remove using a socket and ratchet (can't remember the size). Hold the agitator still with one hand in order to loosen the bolt.
4. With the bolt removed, grasp the agitator by the bottom flanges and pull straight up. It should lift off the center post.

NOTE: Sometimes these agitators will stick due to years of detergent accumulation. You may have to wobble it back and forth to get it loose.

If you have questions, please let me know. I hope this helps you.

May 03, 2009 | Frigidaire Gallery GLWS1339EC Top Load...

1 Answer

Suddenly my inbox is empty why


You need to lodge your complaint with Yahoo! support. No one here is likely to have access to their system to research your problem.

Jan 19, 2009 | Yahoo Mail

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...