Question about Cisco Linksys E2000 Advanced WirelessN Broadband Router Network Routers

1 Answer

Have Linksys E2000, whenever i connect router, I loose all internet connections. I follow the disc, but the self diagnosis says I have no driver. I tried DriverWhiz, but it locks up computer. HELP!!!!! When router connected, the network connection closes, have talked to network provider and config is correct, they suggested I contact you.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 149 Answers

Use the newer drivers http://homedownloads.cisco.com/downloads/utility/1224659225421/Downloadable.CiscoConnect.E2000.1.2.10260.0-ship-Stable.Hotspot.exe

If that doesn't work, then your ethernet drives may be corrupt. Go to: Start -> Right Click "My Computer" -> Properties -> Device manager. In Device Manager select: Network adapters -> Your ethernet chip name -> Right Click & select "Update Drivers". You need to select the drivers off of your cd if your computer doesn't have an internet connection.

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not get into e2000


Who is your Internet service provider?

If it is a DSL company then in some cases the router IP address may change to 192.168.0.1.
What happens when you try to open 192.168.1.1.
Does it ask you for user name and password?
Did you install router using cisco connect software?
Open cisco connect software.
go to router settings.
Click on Advanced settings.
It will open the setup page.

See Linksys E2000 router setup

Mar 05, 2012 | Cisco Linksys E2000 Advanced WirelessN...

1 Answer

How does the gateway2000 solo get the internet my son just buy this


what type of connection you have just try to connect the WAN port of Ethernet cable if u use this cable directly to connect your laptop to internet after that connect to router via wireless it will give you an option to configure the ssid and password for your WiFi follow instruction then you done u don't need to use CD for installation .other old method is to connect your computer to any port of linksys Router E2000 "not WAN " in the browser type 192.168.1.1 then enter put admin for both password and username go to setup make sure DHCP enabled WAN connection should be dHCP as well go to wireless choose manual then enter any name u like for your wireless go to security TAP under wireless then choose manual and the choose enable ,,,, encryption WPA2 enter any password you like save the configuration reboot the router make sure WAN port connected to your main internet it is ready to use should you need any help please contact me on my blog http://computernetworksupportindubai.com/

Jul 22, 2011 | Linksys WirelessN Gigabit InternetSharing...

1 Answer

My computer cannot find my router after following the instructions on the disk


If you installed it correctly,you are looking for the Name Of The Network-not router. If it is wireless connection-after you connect to the your network-open any internet browser and you will be redirected to log-in page of your network.

May 02, 2011 | Cisco Linksys E2000 Advanced WirelessN...

1 Answer

Wireless laptop will cannot connect to the internet through the e2000 router. Wired connection works fine. Flash drive setup for wireless connection was also used.


There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Feb 18, 2011 | Cisco Linksys E2000 Advanced WirelessN...

1 Answer

Whenever i connect my router i loose internet connection and my router is not deected


there can be other issues in your connection problem aside from the router configuration. please call Linksys tech support at 1-800-326-7114.

Sep 04, 2008 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Cisco Linksys E2000 Advanced WirelessN Broadband Router Network Routers Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Gareth Tomlinson
Gareth Tomlinson

Level 2 Expert

116 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...