Anyone know where I might find the manual for this meter? I believe Thermo Scientific bought Orion Research a little while back and the manuals they have online are for the later versions under their name and they don't apply to one actually made by Orion Research.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you are looking at any of these products you must understand that none of them are built to stand the test of time. But if treated properly and with due care they can last a fair amount of time and be a decent value. You must use caution in your choices and do some research on the products you would like to buy as customer reviews will indicate most flaws with these. Generally speaking you will get what you pay for with any of these products you buy cheap you get cheap. The golden rule I use with these things is to be gentle and not jostle or do anything strenuous to them and they will likely give you plenty of years of viewing pleasure. Now do realize this unit you have listed here is an HDTV tuner with an included antenna. You may also connect it via a cable to a larger antenna. I have read the reviews on this one and it seems a pretty good choice in this area.
Steinberg software requires an ASIO driver in order to utilize audio interfaces, whereas Windows Media Player uses a WDM driver I believe. I would start by looking for the ASIO driver for your specific hardware interface (or even use a universal ASIO driver) and see if it is detected then...google should help you find what you're looking for :)
You can solder it and use a heat shrink tubing to cover the solder joints
Heat shrink can be bought in most electronic stores
My only concern would be if the cables are not colour coded in which case you would need an voltmeter to sort out the polarities.
It the termination is in a standard push in connecter such as a mobile phone charger you would need to make sure that the positive supply goes to the inner and the negative to the outer
That is done by hooking a meter onto the wires from the adaptor and reading the voltages if they have a - sign against them you need to turn the probes around and check it again once you have the + sign in front of the reading mark the cable the red lead is on witha bit of masking tape
Then put the meter on continuity and place the tip inside the plug which goes into the Teac get someone to connect the other lead to the pair of wires leading from it and the one which shows a reading or Continuity goes to the one with the masking tape.
sounds like one of your cameras lost connection and the system is rebooting because of that. check the general configuration screen and make sure the reboot on exit is not checked, also check all of your camera connections to make sure they are all ok and receiving video on all channels.
1. Press the [DISP] button repeatedly to switch to the clock adjustment mode.
2. To adjust the hour, press either button  or  while holding the [DISP] button down.
3. To adjust the minutes, press either button  or  while holding the [DISP] button down.
the manuals are ''down'' on thewebsite unfortuantely...thought u should know..but u may be able to download them at a future date..go to motu.com/downloads
could u help me??
do u know how to chain an adat to a traveler to expand the outputs via firewire by the way?
I need to initialise something on the sequencer ?? (logic)
thnx if u knwo a solution!