Question about Black & Decker Tools & Hardware - Others

1 Answer

Adjusting the clinch of bostitch d60 air tool tool is not clinching the carton tight on the left side

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The piercing anvil has become blunt, worn or broken. You can buy these for either the left or right side but if one has gone, the other may not be far behind, so I'd buy both sides. They're an easy enough fit and should be easily obtained from your local Stanley Bostitch dealer, or Bostitch themselves.

Posted on Apr 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a LSC27910ST side by side refrigerator that sprays out water from a tubing line on the back of the refrigerator when you are using the water dispenser and also the condenser fan isn't coming on


This tubing supplies the icemaker and cold water spout in the refrigerator. If you follow it back to its source (probably below the floor) you will find a shutoff valve. This valve usually is a screw-in with wings so that you can turn off with your fingers. Turn it clockwise until it stops. The water from behind the refigerator should have stopped. Now you need to determine if the nut clinching the tube to the fitting on the refrigerator is tight. This should be visible near the floor. If it moves easily, like with your fingers, this is the source of the leak and needs to be tightened with a small adjustable wrench or pliers. Then turn the water valve back on and verify it solved the leak. If the leak comes from the tubing itself, you will have to shorten the tubing to the leak or buy a hose to hose fitting if you have to keep the full length. The tubing will cut with a sharp knife, but make sure the valve is off before you try that.

Oct 07, 2013 | LG LSC27910 (265 cu ft) Side by Side...

1 Answer

Overheating brakes


I think the problem is the brake pad or caliper, brake pad are too thick or the caliper are not good casted.
First try to confirm if you get a right brake caliper ,then confirm the brake disc ,brake pad, if they all ok, tear down the bracket of caliper, put into brake pad, then put into brake rotor.
http://www.fiverhope.com/category-4-b0-Brake-caliper.html

Jun 27, 2013 | Cars & Trucks

1 Answer

How to remove bugaboo cameleon handlebar to replace foam


You can't it's a major job that takes an hour or more and needs an expensive clinch tool to re rivet. Bugaboo sell a zip on replacment.

Jan 10, 2013 | Bugaboo Cameleon Jogger

1 Answer

The staples go through the material, but don't fasten or close on the back side


This is not a type of stapler that clinches the legs of the staples. There would have to be a lower jaw to do that. Like a desk top stapler has.

Nov 25, 2012 | Stanley TR250 H Heavy Duty Heavy Duty...

1 Answer

How do i get out of a clinch, i do not have any manuals for the game to help me?


What game is this for?

Fight Night Round 3 - Press the up button (normal config)

Fight Night Round 4 - Press the up button (normal config)

UFC undisputed 2010 or 2009 - Rotate Left anolog stick while in takedown, or repeately mash face buttons while in standing up clinch.

Mar 13, 2011 | Video Game Consoles & Games

1 Answer

How do i load the staple gun?


1 Hold stapler upside down.
2. Release black plastic catch at rear and pull out.
3. Drop staples into bottom of gun, with open side up.
4. Push black plastic catch closed and latched.

wallyp

Oct 30, 2010 | Stanley Bostitch Pc4000oc2 Outward Clinch...

2 Answers

How do I install a new headlight bulb on 2004 ford taurus? removing single restraining bolt does not work.


1.facing driversidelight looking at headlamp itself at clock postions8,11 and 1 are the screws(10mm).to the right of the 11 oclock screw is a clinch screw dont remove just loosen and headlamp asm, comes right out. pull foward, diaconnect connector, now its free to work on,remove lock ring and wiggle and pull bulb straight out,(no twisting)install new bulb dont touch the glass. On pass/side bolts are at 11,1 and 4 and clinch bolt is to left of 1 oclock. hope this helps.

Jan 23, 2010 | 2004 Ford Taurus

1 Answer

Remove the canipy


take a pair of plyers to the clips on the back of the seat and pull the clip out as u clinch the connector pice together to fit it through the hole. doing both sides will release the canopy. then all you have to do is take a butter knife and take off the black things theres a clip on one side youll see it just pry up the black clip and pull down on the white then just pull out the plastic pieces. oh and remember air dry it. other wise youll have a heck of a time threading the plastic rods through

ps even flo car seats blow big time and i still have trouble with the harness adjusters

Apr 19, 2008 | Evenflo Embrace

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Tools & Hardware - Others Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Gil Shultz

Level 3 Expert

3368 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Black & Decker Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...