Question about Gigabyte GA-G41M-ES2L Motherboard

1 Answer

Installed new motherboard (Gigabyte GA-G41M-ES2L), I cannot figure out where to plug the blue & white wire coming from the main power button on the front of the computer on the motherboard. Please help. Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 75 Answers

Hello tami_hennacy

unfortunately the wiring color for computer cases are not standard. so blue and white does not mean much. you need to look at the connection on the tip of the wire to see if it is labeled so you can locate the corresponding connection point on the mother board. Gigabyte motherboards have a very good step by step discretion of all connections.

if it is not labeled then you need to oped the case front panel and see what the other end of this pair of wires is connected to.

hopefully this has helped
good luck

Posted on Feb 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with Gigabyte GA-G41M-Combo Motherboard CPU Wont heat


All information here:
http://www.gigabyte.com/products/product-page.aspx?pid=3500

If you mean it can't power up, check the cables and power supply too (PSU).

Aug 29, 2013 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

Can Gigabyte GA-G41M Motherboard will support pentium d 925 processor


Hi there
Without detailed info about which model of G41 board you have it is impossible to give a definitive answer as looking at the Gigabyte website, some do and some don't. If you go to this page,

http://www.gigabyte.com/search/search.aspx?kw=GA-G41M#pr-1

you will find a list of G41 boards. If you click on your board you will go to a page with several tabs, one of which is "support & downloads". If you click on this you will find a red label saying "CPU support list". If you click on this you will get a long list of the PUs supported by that particular mobo.
Good hunting

Feb 08, 2013 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

After power on beeper beeps 9 times and computer doesn't working. What is it? Motherboard ga-g41m-es2l


error: 9 beeps is ROM checksum

Turn OFF the PC

1.- Clear the CMOS (jumper near the battery)
place the jumper in 2-3
return the jumper to normal position
2. Remove the battery

Turn on
enter to BIOS
Update bios from the Gigabyte web page

remeber rate my answer,,
Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Sep 20, 2011 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

Where would i get GA-G41M-ES2L driver


http://www.gigabyte.com/products/product-page.aspx?pid=3500#dl
In the Downloads section, select your OS, then download.

Sep 17, 2011 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

How can i change intel chip on my gigabite motherboard


Try this . Explains quite a bit. http://www.iusermanual.com/motherboard/gigabyte-ga-g41m-es2l-motherboard-manual.htm

Feb 17, 2011 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

I have gigabyte GA-G41M-ES2SL rev 1.1 motherboard with 2 GB RAM, 350 GB SATA HD, and SATA DVD-ROM. My PC die yesterday. i check it. there is no electricity to my pc, i think my Power supply (380W) was...


hey yo, i think your problem is quite similar to my problem. Because after I've installed it properly and after 5 hours working the screen suddenly become blank and not detect the connection. I think the mobo already broke down.. T_T

Dec 20, 2010 | Gigabyte GA-G41M-ES2L Motherboard

1 Answer

Dear Friends i have used in gigabyte mother board model no:GA-G41M-ES2L the problem is how i update my bios now is currently used in old version 1.0 but i have to update my bios pls tell me and solve...


you need to flash the bios .

download the new bios from gigabyte website and follow their instructions on how to update bios. be very carefull when doing this because if done incorrectly it would render your motherboard useless permanently .

in my experience if your m/b is working its best not to update the bios only time i would update the bios would be if the new bios update has new features that i really needed . if not i would not really flash the bios .

Aug 02, 2010 | Gigabyte GA-G41M-ES2L Motherboard

2 Answers

Pin out guide for gigabyte g41m


http://europe.giga-byte.com/FileList/Manual/motherboard_manual_ga-g41m_es2l_e.pdf

Jan 17, 2010 | Gigabyte GA-G41M-ES2L Motherboard

Not finding what you are looking for?
Gigabyte GA-G41M-ES2L Motherboard Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gigabyte Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Tony

Level 3 Expert

2600 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...