Question about Heating & Cooling

2 Answers

BRAND NEW COMFORT ZONE HEATER MELTED MY EXTENSION CORD IT WAS ON 1500WATTS I DO NOT KNOW WHY THIS HAPPEN, WHAT CAN I DO TO PREVENT THIS FROM HAPPENING OR WORSE CAUSE A FIRE, I AM SCARED TO USE IT NOW

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 250 Answers

1500 watts is about as strong as the extension cord can handle my advice would be to buy a heavy duty extension cord made for a/c or heaters which are alot thicker than an average cord and only have a single plug on the end.

Posted on Dec 30, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,133 Answers

Check Guard wire properly insulated.And also it's not under sized and also it's away from the heater coil. Don't worry proper insulation and proper safety measures avoid firing. All the best. Helpful?

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Comfort Zone Infrared Quartz Heater is not staying on it cut right off. Please advise


Clean the filter and the element. Make sure that they are dry before you re-install them. Check the power cord and socket for damage..

Feb 21, 2015 | Comfort Zone Heating & Cooling

1 Answer

Melted block heater


YOU MUST HAVE HAD A SHORT IN THE BLOCK HEATER OR THE 115 VOLTS TO THE HEATER MUST HAVE BEING SHORTING ON GROUND SOMEWHERE.

Mar 01, 2014 | 2012 Hyundai Veracruz GLS 4dr SUV 3.8L V6...

1 Answer

Need manual for the comfort zone cz20110


NEED TO FIND OUT THE COMPLAINT DEPARTMENT, HEATER MELTED OUTLET AND PLUG NEED TO KNOW WHOOM TO CONTACT

Jan 07, 2012 | Comfort Zone CZ1500WC Infra-Red...

2 Answers

I have a Comfort Zone CZ1500W showing an AO5 error code. I have 9 ohms across each element. The fan thermostat reads open. When I bypass it the fan runs, but no heat. The element thermostat reads


Everytime I turn on the CZ heater, the display reads A05 and then it goes away when i set the temp. As far as I can see and feel, I'm not experiencing any issues with the heating, fan, or thermostat or the extension cord running hot. I'm concerned that something could be wrong or unsafe, with Comfort Zone filing for Chapter 7, anyone know who is offering support or a number I can contact?

Dec 02, 2011 | Comfort Zone CZ1500WC Infra-Red...

1 Answer

The plug and cord about two inches down are hot to touch,i purchased in 1 /09 have used less than 10 times have had my electric all checked by licensed prof. even changed electrical socket which was not...


if you are using an extension cord to plug up this then that will do that.you shouldnt use extra cords plug unit in to wall socket. i dont know if this helps but sometimes this is over looked. best of luck.

Jan 08, 2011 | Comfort Zone NEW 09 Electric Portable...

1 Answer

My comfort zone 1500wo isn't cycling on and off. Do you know what is happening & how to fix it?


Hi, I just got my comfort zone 1500w and same thing. I called Comfort Zone this morning at 1-800-221-6895, they are most pleasant and helpful. She said it was because I had it on the energy saving mode. When it is set to that the fan runs continuously and never shuts off. She said to put it to the low or high setting and once the temp is reached, it will automatically shut off. Then when the temp drops it will turn on. Cycling off and on doesn't work with the energy saving function - she couldn't really give me an explanation for it just said don't use it if I want it to cycle off and on. Hope this helps.

Dec 22, 2010 | Comfort Zone NEW 09 Electric Portable...

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2460 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...