Question about DISH Network IR Remote Control

1 Answer

All of sudden my Dish tv remote is not functioning. Pls assist me in this....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • DISH Network Expert
  • 146 Answers

Hey there, this is Cheri Torres with DISH Network customerservice. I came across your post and wanted to see if I could help you resolvethis issue. The first thing you are going to want to check, if you already havenot, is the batteries. Make sure you have fresh batteries in your remote justin case this is the issue causing the remote not to work. If your batteries arenew the next step would be to make sure everything on your remote is lightingup such as the mode lights at the top of the remote (i.e. SAT, AUX etc.). Inthe case that your mode lights are not lighting up, you will need to call DISHNetwork at 1-800-333-3474 to have them send you a new remote. If all the lightsare lighting up on the remote there are a few steps that you can follow to getthe remote readdressed to your receiver. I hope these instructions work wellfor you. If you have any further questions or concerns feel free to post backhere or email me at Cheri.Torres@Dishnetwork.com. :)

All IR Remotes

  1. Go to System Info scree. You will enter the system info screen by pressing the system info button on the front of the DISH Network receiver box. If your receiver box doesn't have a system info button you can press the power button once and release then the up arrow button once and release. The last option would be to open the smart card door on the left front side of the receiver and pull out the smart card.
  2. Hold down the SAT button on the DISH remote until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record button three times. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an ol RCA tv, new dish remote everything works but the mute button...i can raise and lower volume, turn off and on but not mute


Hi there Stacey, my name is Kimberly and I form part of the Social Media Department with DISH. We do not promise that our remote will control all the functions of you TV. The codes used to program your DISH remote to the TV may be limited to some functions. You can try addressing your remote to the TV using different codes. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can lookup the different codes here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Feb 27, 2014 | DISH Network Televison & Video

1 Answer

Harmon kardon codes for dish tv remote


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can lookup codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Feb 06, 2014 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

Need codes for toshiba tv


Hi Howards, my name is Kimberly and I form part of the Social Media department with DISH. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can look up codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

NOTE: we do not guarantee our remote will control all your TV functions. Our remotes are made to work strictly with DISH equipment.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Dec 29, 2013 | DISH Network IR Remote Control

1 Answer

Geosuper tv


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Follow this link to obtain the code you need to address your remote to the tv: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly.Escobar
Social Media Representative
DISH L.L.C

Dec 26, 2013 | DISH Network Televison & Video

1 Answer

MY DISH REMOTE NOT CONNECTEING WITH TV AND DISH RECEIVER


I would be happy to help with this, Shazia. To provide the best assistance, I would like to get more information. The remote currently doesn't work the TV or receiver, right? Do you get any function from the remote, like do any lights come on when you press a button? What receiver model do you have?

Tommy Faust
DISH Social Media Representative

Nov 19, 2013 | DISH Network IR Remote Control

1 Answer

My 4.4 dish network remote codes listed for viewsonic hdtv do not work,I have tried:507,551,562,566,575,583,600,752,760,796 ( 606would not program into remote)


Hi there TonyMichael, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you and provide you with information that can help program your remote to your television. The codes we have listed for a Viewsonic Tv to be programmed with a 4.4 IR/UHF Pro remote are: 566, 505, and 760.
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at kimberly.escobar@dish.com!

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.


Kimberly. Escobar
Social Media Representative
DISH L.L.C

Oct 11, 2013 | ViewSonic N2630w 26 in. LCD TV

1 Answer

I need tv codes for sylvania tv


Hi there! I have listed the steps below to assist with programming the DISH remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can find the codes needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Kimberly Escobar
Social Media Representative
DISH L.L.C

Oct 02, 2013 | DISH Network IR Remote Control

1 Answer

Have used toshiba tv and want to program my dish tv remote to control the volume and off/on features. The codes given by dish tv didn't work


Hi there Kelly, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com

You can lookup codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Sep 18, 2013 | Televison & Video

1 Answer

I bought a new TV and need to program my Dish network remote control


Hey scrappy32847,

Congrats on the new TV! I can definitely assist you with this and get it taken care of. As I don't know what TV you have I don't have any codes off hand available.

You can check out this link: http://www.dishnetwork.com/SupportSection/remote-setup to get the codes to program your remote. I have also listed the steps below to program that remote to your new TV.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you need any additional assistance you can reach me here or at thomas.faust@dishnetwork.com

Tommy Faust
DISH Network

Jun 24, 2011 | DISH Network IR Remote Control

1 Answer

Menu button won't work


The codes that are provided to operate the tv from a Dish remote will not offer full functionality with most TV's. The menu button on the Dish remote even when able to bring up the menu screen on TV's is unable to navigate the menu screen due to the complexity of the TV's set up. The newest receiver that Dish has on the market is the 222k which is a dual tuner/two room HD receiver without DVR that has LEARNING REMOTES that might be able to accomplish the goal you are trying to obtain. I hope this answers your question and remember to keep the original TV remote in a safe place so that you can use other functions on your TV as well. Thanks for using Fix Ya and let me know if I can be of further assistance.

Dec 12, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network IR Remote Control Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...