So, I have another question. Where would I go about finding this board? When I do searches online, I can't seem to find it by itself. Is there a site or place that you know of that would carry it? Any info would be greatly appreciated, and thanks for all your help so far.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your one and only problem is a bad convergence Amp board. Changing it will fix your set. You can contact http://www.interactiverepair.com for step by step assistant with installation of this board. List price $100 Part Number: BP95-00142P
If this tv is a Samsung HCM4215W with the symptom you described you are likely to have fluid leak on the board. Sounds like a classic fluid leak problem since the audio does come on and then going intermittent. If you find fluid from the tube(s) on the board then the set could not be worth fixing unless you can break up the fluid with degreaser spray. The fluid is conductive and will cause intermittent or shut down altogether the set. Look for the fluid as a clear substance. Also you may have a bad proscan board (module) Comes on with audio and no picture then on/offREPLACE PRO SCAN MODULE BP95-00077A. Do a search online for part for availability. But look first for the fluid leak.
Hi, 3 times red standby blinking light indicates Lamp Cover is not attached securely or Lamp has not been fixed properly inside tv. Make sure lamp and lamp cover are securely attached in tv. I do not think G3 board is bad because 3 times blinking error is related with lamp cover that engages micro switch inside tv. Let me know your findings to provide you more helpful info. You can download service manual from This Site for little fee. Thanks.
your only chance will be find one at the local repair shops that may have saved some from sets they have scraped out, But they are hard to come by, and phillips have them as no longer available as do most manufactures shortly after that model lines goes out of production. Also try www.craigslist.org as they have chapters all over the world and often people give away dead sets, you may get lucky and find one.
replace the pcb convergence board,, It costs $96 and takes 10 minutes to replace you will have to manually line up your convergence afterward as the settings go to factory default. Everyone that owns this set has or will have to replace this part within 3 years http://www.samsungparts.com/search/search.asp
Or Vance baldwin online
Part number bp94-00155a
The convergence amps are the big STK's*** located possibly on the G-board in the sony. It is very difficult if you are not familiar with components and soldering, You can buy them at MCMelectronics, bluestar-online.com, Tritronics, VanceBaldwin.com, etc. Diagrams are online at fixya.com on the rightside of screen. Places like Manual.com or you can search the web. Hope this helps!